Products
Pressure Gauge, 0-120 PSI
Pressure gauge, 0-120 psi, 1/4" npt bottom inlet, right hand threads.
$13.99
Pressure Gauge, 0-15 PSI
Replacement low pressure gauge for Co2 regulator. Looking to dial in your dispensing pressure? The maximum reading on this gauge is 15psi allowing you to adjust to that perfect pressure. 0-15 PSI 1/4" NPT bottom inlet Right hand threads
$14.99
Pressure Gauge, 0-160 PSI
Pressure gauge, 0-160 psi, 1/4" npt bottom inlet, right hand threads.
$9.95
Pressure Gauge, 0-30 PSI
Replacement regulator pressure gauge 0-30 PSI 1/4" NPT bottom inlet Right hand threads Blowout back safety feature
$12.99
Pressure Gauge, 0-3000 PSI
Replacement tank pressure gauge 0-3000psi (200bar) for regulator. 0-3000 PSI 1/4" NPT Right Inlet Left hand threads Back Blowout Safety Feature
$16.50
Pressure Gauge, 0-60 PSI
Replacement pressure gauge 0-60 PSI 1/4" NPT bottom inlet Right hand threads
$12.99
Principles of Brewing Science
Principles of Brewing Science is an indispensable reference which applies the practical language of science to the art of brewing. As an introduction to the science of brewing chemistry for the homebrewer to the serious brewer’s desire for detailed scientific explanations of the process, Principles is a standard addition to any brewing bookshelf. Author: George Fix, Ph.DPaperback: 199 pages
$29.95
Pro Sight Glass Distillation Lid (35L)
Compatible with 35L BrewZillas and DigiBoils. Designed to be extremely sturdy when using heavier stills or off-center steam condenser units. Pairs perfectly with AlcoEngine Still Tops or the BrewZilla Steam Condenser Set. The PPSU sight glass allows you to watch your wort or wash boil and keep an eye on foaming issues. For brewing with the Steam Condenser Set, the sight glass is easily removed for adding hops or other boil additions. (Use gloves, it will be hot!) PPSU is an excellent choice for components that are exposed to high temperatures (up to 392°F / 200°C) and corrosive media due to its exceptional chemical resistance. As well as being extremely impact resistant. KegLand decided to use this type of plastic because it also has superior thermal and mechanical properties with the added benefit of being transparent. Intricate parts can be injection molded that would have been near impossible to do with stainless steel or lab-grade glass. Specs: 2" T.C. top ferrule port 3" T.C. sight glass ferrule Lid handles with molded grips Thicker silicone lid gasket for a tighter seal Includes: 3" PPSU sight glass disc 3" tri-clamp 3" silicone tri-clamp gasket Silicone lid gasket
$165.00
Probe O-Ring - Micro Matic D System
Keg beer dispense heads body o-ring for Micro Matic D system couplers. Listed as #5 on the exploded view photo.
$1.99
Probe Seal - Micro Matic D System
Keg beer dispense heads probe seal for Micro Matic D system couplers. Listed as #4 on the exploded view photo.
$1.99
Probe Washer, European & Perlick Couplers
Replacement probe washer for Perlick and European style couplers.
$2.99
Progress (UK) Pellet Hops
Hop Type: Dual-PurposeOrigin: EnglandAlpha Acid: 5.0 - 8.0%Similar Varieties: Fuggle, East Kent GoldingCommon Styles: Bitters, Pale Ale, India Pale Ales, Mild, Brown Ales, and Scottish Ales Progress was one of the first varieties to come out of a modern breeding program in England. Its lineage includes Whitbread Goldings and O.B.79, making it cousin to Target. Developed to create a very English Fuggle-like impression in the glass. Moderate to strong suggestions of spring grass, herbs, and fresh flowers overlaid on woods and dried mint. Adds nice floral and grass/herbal complement when blended with fruitier varieties (think EKG or Sovereign) for late and dry hopping. Very fine as a late kettle, hop back, or cask addition in the hoppy English trifecta: bitter, pale ale, IPA. Progress has a high enough alpha content to also perform light bittering duty in mild, brown, and Scottish ales. Adds a nice element to brown porters. Like Fuggle, does well as a single hop or component of a blend.
$2.25 - $15.55
Proof and Tralles Hydrometer
This economy proof and tralles hydrometer is used to find the alcohol percentage of alcohol by volume (abv) in a completely dry or distilled liquor. It does this by measuring the density of the liquid compared to that of alcohol; any residual sugar or other cause of change to the density will result in a false low reading. Hydrometer for testing alcohol levels in distilled spirits. Will only work in solutions of ethanol and water, will not read the alcohol levels of beer or wine.Reads alcohol percentage on scale of 0-100%, and Tralles scale (Proof) on a scale of 0-200.
$8.99
Propper Starter™ Canned Wort
Propper Starter concentrated wort makes it easy to give your yeast the proper start when preparing high gravity brews, cold-pitched lagers, yeast packs nearing expiration and whenever a starter is recommended. No more measuring messy DME. No more waiting to boil and cool. Just mix one can with an equal amount of purified water in a sanitized flask to produce one liter of ready starter wort. For increasing biomass and vitality in your yeast, Prop It Up™ with a can of Propper Starter! Recommended UseOne (1) can of Propper Starter makes one liter (1L) starter Instructions Sanitize 2L flask, stir bar, top of can and yeast pack. Swirl and open can. Pour contents into flask. Add 16oz of bottled, distilled or boiled (and cooled) water to flask. Pitch yeast and swirl flask to mix. Add stir bar to flask, cover with foil, and mix on stir plate for 24 hours. FAQ
$4.99 - $17.99
Propylene Glycol - 1 Gallon
Food-Grade Propylene Glycol USP for use in the Glycol Chiller. Dilute with distilled water to the ratio specified in the instructions for your chiller. Refer to the instructions provided with the Glycol Chiller for mixing, filling and pump priming information. 1 gallon bottle (3.79 L) PLEASE NOTE: While Propylene Glycol is considered food grade this is not meant to suggest that it is safe for consumption. In case of consumption please contact your local Poison Control Center immediately.
$54.99
Pump Connector with 3/8'' Hose Barb
Connects any picnic pump to CO2 inlet side of coupler. Material: Brass Finish: Chrome Plated Brass Barb: 3/8" Length: 5/16"
$4.95 $3.99
Pump Up The Wheat - Extract with Grains Kit
Introducing our Wheat Beer extract recipe kit - a versatile brewing experience that opens the door to a world of creative possibilities. Crafted to showcase the light, refreshing qualities of wheat beer, this kit offers a blank canvas for both aspiring and experienced homebrewers to experiment with different yeast options and elevate their brewing game. This kit includes premium wheat malt extract, specialty grains, hops for balancing flavors, and the option to choose from a selection of yeast strains to personalize your brew. Whether you prefer a classic Hefeweizen yeast for its fruity and spicy notes, a clean American wheat beer yeast, or a Belgian strain for added complexity, the choice is yours to tailor the beer to your taste preferences. Not just limited to traditional wheat beer styles, this kit serves as a fantastic base for creating fruited beer variations. Add your favorite fruits during fermentation to infuse delightful flavors and aromas into your brew, from citrusy orange zest to luscious raspberry puree, the possibilities are endless. With detailed brewing instructions provided, crafting your own wheat beer has never been easier. Unleash your creativity, experiment with different yeast strains, and create a custom fruited beer masterpiece that reflects your unique brewing style. Pump up your homebrewing experience with our Wheat Beer extract recipe kit and let your imagination run wild in every sip. Cheers to brewing innovation! Our recipe kits include steeping muslin socks for grain and hop additions. Yeast and priming sugar are not included in the kit and are optional add-on items. Makes 5 Gallons. Estimated Beer Stats LME Option DME Option Original Gravity (OG) 1.044 1.054 Final Gravity (FG) 1.008 1.010 Approximate ABV 4.7% 5.6% Color (SRM) 4 4 Bitterness (IBUs) 16 15 Ingredient / Instruction Sheet
$34.99 - $36.99
Pure Turbo Yeast
Triple Distilled Turbo should be used where ultimate alcohol quality is of primary importance. Only use where cool air temperature (between 18 Degrees Celsius) can be maintained. This is a revolutionary breakthrough in Turbo Yeast development making it possible to produce "triple distilled" quality alcohol in the home. It is essential to use Turbo Carbon with Triple Distilled Turbo Yeast.
$7.99
Purple Corn Cracked - Non-GMO
Cracked, unmalted and unmodified heirloom purple corn is an excellent addition to the mashbill for bourbon or corn whiskey; brewers can use it for color and flavor adjustment in pale lager, traditional cream ale, and other beer styles. In brewing trials, purple corn brought sensory notes of corn chip, honey, and fruit, as well as a red-to-purple hue depending on inclusion rate and recipe. Distilled spirit produced from a base of pale barley malt and purple corn displayed strong fruity, sweet, and almond attributes with undertones of caramel. The main difference between our flaked corn and this product is that the purple corn is not gelatinized. When brewing with purple corn, it’s recommended to follow a cereal mash procedure to gelatinize and liquefy the starches in the unmalted grain. Cereal Mash Procedure In a cereal mash, a small proportion of malt from the grain bill is added to a separate boiling vessel called the adjunct cooker, along with the entire charge of unmalted grain. The malt and grain mixture in the adjunct cooker undergoes a short mash rest followed by boiling, after which it is added to the main mash with the remainder of the malt. Boiling gelatinizes the starch in the unmalted grain, while the malt enzymes help liquefy the gelatinized starch before and during the main mash. As a reference, the following schedule was used to brew a 3 hL batch of purple corn lager at the Rahr Technical Center pilot brewery: Mash Tun Profile and Ingredients Grain bill– 80.00% Rahr Premium Pils, 20.00% Purple Corn Enzyme Additions – Hitempase 2XL – 12 g, Bioglucanase – 15 mL Adjunct Cooker Mash: Mash In 105°F 1st Rest – 105°F for 20 min 2nd Rest – 212°F for 15 min Three Step Mash Mash In 122°F 1st Rest – 122°F for 20 min 2nd Rest – 156°F for 45 min Mash-Off – 171°F for 1 min Sources consulted: Purple Corn: Pilot Brewing Trial Overview, Rahr Technical Center, July 2020 MBAA Practical Handbook for the Specialty Brewer Vol. 1: Raw Materials & Brewhouse Operations, 2016
$3.00 - $27.50
Push In Pressure Gauge
This 0-40 psi, push-in pressure gauge comes with an 8 mm (5/16 in.) barb and is specifically designed to be compatible with 8 mm Duotight fittings. It's the ideal companion to the BlowTie Diaphragm Spunding Valve, allowing you to dial in your blow off setting for pressure fermentations or pressure transfers. Triple-scaled to read in psi, bar, and kPa.
$9.90
Push-in 9.5 mm (3/8 in.) Check Valve
Compatible with EVABarrier 9.5 mm OD tubing. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Made from food-grade acetal plastic Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$7.99 $4.99
Pyramid Cheese Mold
8cm pyramidal mold for Valencay or other type cheese. Simply fill the mold with curdled milk and let it drain.
$7.99
Quick Connect Fitting - FQC x Barb
Out of all the ways to attach silicone tubing to your brew kettle we like quick connect ball lock fittings the most. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs, cam locks or tri-clamps. These fittings can easily be attached using one hand even with heavy brewing gloves. The over sized barb (5/8" OD) is specially designed for our 1/2" silicone tubing. The larger size does two things: It stretches the tubing over the barb creating a tight fit requiring no hose clamps. The inside diameter of our barb is 1/2" compared to standard 1/2" barbs which have a smaller 3/8" size. This creates a full port design and will not restrict flow going through the barb. Specificatioins: 304SS 5/8" barb x QC 1/2" ID
$17.00
Quick Connect Fitting - MQC x FNPT
Out of all the ways to attach silicone tubing to your brew kettle we like quick connect ball lock fittings the most. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs, cam locks or tri-clamps. These fittings can easily be attached using one hand even with heavy brewing gloves. The inside diameter of our QC fitting is 1/2". This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 1/2NPT x QC 1/2" ID
$9.99
Quick Connect Fitting - MQC x MNPT
Out of all the ways to attach silicone tubing to your brew kettle we like quick connect ball lock fittings the most. The ease of connecting/disconnecting and cleaning is unmatched by standard hose barbs, cam locks or tri-clamps. These fittings can easily be attached using one hand even with heavy brewing gloves. The inside diameter of our QC fitting is 1/2". This creates a full port design and will not restrict flow going through the barb. Specifications: 304SS 1/2NPT x QC 1/2" ID
$9.99
Quick Connect Replacement O-Rings
Set of 3 replacement o-rings for quick connect fittings. Specifications: Silicone o-ring Sold in set of 3
$3.00
Quick Connector 1/2'' 90 degree Barb x 1/2'' FPT
1/2" barb with a 90 degree bend x 1/2" FPT (female pipe thread) quick connector. Metal parts are stainless steel.
$11.99 $7.99
Quick Connector 1/4'' MFL x 1/2'' FPT
1/4" MFL (male flare) to 1/2" FPT (female pipe thread) quick connector. Metal parts are stainless steel.
$8.99
Quick Disconnect Pre Filter for Transfer Pump
Replacement prefilter for Super Transfer pump. The redesigned pre-filter is easier to remove and reattach with the need for tools, and fully disassembles for cleaning. Fully compatible with pre-2020 Super Transfer pumps that came with the original pre-filter.
$34.99
QuickConnector™ 1/4" mfl x 1/2'' FPT
Blichmann Engineering's 1/4" mfl QuickConnector™ Specifications: 1/4" mfl x 1/2" fpt 100% stainless throughout Cool touch silicone grips Retained silicone o-ring Easy to clean and sanitize
$13.99 $11.99
QuickConnector™ 3/8'' Barb x 1/2'' FPT
Blichmann Engineering's QuickConnector™ Stainless Swivel Fitting Specifications: 1/2" fpt x 3/8" straight barb Cool touch silicone grips Retained silicone o-ring Easily cleaned
$16.00 $12.99
R-2 Dry Wine Yeast
Enhances the varietal character by enzymatic release of bound aroma precursors. Perfect for aromatic whites like Sauvignon Blanc, Riesling, Gewurztraminer, Chenin Blanc, Vidal, and Seyval. Ferments down to 50F. Ideal for Icewine. 1g per gallon.
$2.99 - $19.99
R-HST Dry Wine Yeast
Produces premium, crisp white wines destined for aging. Developed for Riesling. Best used when the most transparency between fruit and a finished wine is sought. Developed for Riesling. Alcohol tolerant to 15%. Use 1 gram per gallon.
$2.99 - $19.99
Racking Arm
Another cool product the Spike Brewing engineers and in-house welders developed is their USA made racking arm. This racking arm provides 6" of total travel allowing you to draw clear wort even with the hoppiest of beers.The racking arm also incorporates a position indicator that is welded on so the orientation of the racking arm can easily be seen from the outside of the sealed conical (especially useful in closed pressure transfers). Specifications: 1.5" TC 304SS Position indicator Works with every size conical Made in the USA **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**
$40.00
Racking Cane 24" - 3/8"OD
3/8" x 24" plastic racking cane, uses 5/16" ID tubing. With the bend, the cane is 21" long
$3.99
Rahr Dextrin Malt
Whether you’re looking to boost mouthfeel in hazy or to show off a mousselike foam stand on a pils, Rahr Dextrin Malt is designed to improve your beer. Lower modification and higher protein levels mean better body, improved haze formation, and stable foam, while the low color makes it suitable for use in even the palest styles. When used at up to 10%, hazy IPA brewers will appreciate the stable haze that Rahr Dextrin Malt contributes without increasing beer color. Foam stability, viscosity, and body will be increased with the addition of Rahr Dextrin to the mashbill. Brewers using chit malt for head retention and mouthfeel in lagers and other styles will find the same features in a domestic alternative. Depending on inclusion rate in the mashbill, look for bready, grainy, and raw barley flavors. Dextrin malt is a substitute for Carapils Specifications: Usage Rate: Up to 10% Color Range °L : 1.2 - 2.2 Moisture Max % : 6.0 Origin : North America 50 pound bags also available.
$2.45 - $2.55
