Products

The authors of the best-selling Fermented Vegetables are back, and this time they've brought the heat with them. Whet your appetite with more than 60 recipes for hot sauces, mustards, pickles, chutneys, relishes, and kimchis from around the globe. Chiles take the spotlight, with recipes such as Thai Pepper Mint Cilantro Paste, Aleppo Zaatar Pomegranate Sauce, and Mango Plantain Habanero Ferment, but other traditional spices like horseradish, ginger, and peppercorns also make cameo appearances. Dozens of additional recipes for breakfast foods, snacks, entrees, and beverages highlight the many uses for hot ferments.

Read more less

Filmjolk yogurt starter culture- make your own mildly tangy Filmjolk yogurt. Originally from Finland, this heirloom variety is mesophilic, meaning that it will culture at room temperature (70-77 degrees). No yogurt maker is required. Reusable- by reserving a bit from each batch, you can continue to make Filmjolk yogurt indefinitely! You will receive: x2 0.03 oz (.8g) packets each of Filmjolk yogurt starter culture Ingredients: organic whole milk, live active cultures Pro-bacteria found: lactococcus lactis, leuconostoc mesenteroides, and diacetyl. Contains milk Non-GMO, gluten-free Instructions

Read more less

Used with the 10" filter housing to ensure a tight seal.

Read more less

10" filter housing with 1/2" FPT for the "in" and "out" fittings. (fittings sold seperately).

Read more less

For use with an in-line plate filter. These pads will provide between .3 - .5 Micron filtration. This pad is the right choice when you want to promote sterility in the bottle, although do please note that the pad does not remove 100% of bacteria - only an absolute rated .45 micron or less cartridge filter can do so. Then why do we sell this pad? Some experienced winemakers who are familiar with their wine and who do not have a cartridge filter use this pad to remove most ml bacteria, making it less likely that an unwanted ML fermentation takes place in the bottle. Each filter pad set is good for approximately 5 gallons of wine when the wine has already been filtered by the polish pads. These pads are disposable.

Read more less

For use with an in-line plate filter. These pads will provide between 1-2 Micron filtration.Each filter pad set is good for approximately 5 gallons of beer. These pads are not designed to be back flushed and reused and should be used in one session.

Read more less

For use with an in-line plate filter. These pads will provide between 5-7 Micron filtration.Each filter pad set is good for approximately 5 gallons of beer. These pads are not designed to be back flushed and reused and should be used in one session.

Read more less

Precisely read your finishing gravities in beer with this narrow-range, highly accurate hydrometer. The scale range is only .0.985-1.003, but the individual gradients are extra-large allowing for an easy read.

Read more less

A fine mesh nylon bag with a flat bottom, 12" x 19".

Read more less

A fine mesh nylon bag with a flat bottom, 18.75" x 19"

Read more less

- Tank Plug, Ball-Lock (gas)- For Firestone V & VI Challenger and Super Challenger Tanks- 9/16 - 18 Thread size- Plug includes Poppet and O-Ring.

Read more less

Five Star Chemical's Acid #5 cleaner with a blend of nitric and phosphoric acids with low-foaming surfactants for stone/protein removal. Please Note: Hazardous Material; does not ship.  For store pick-up only. Key Features: Specially formulated to passivate and re-passivate stainlesssteel. Low-foaming designed to attack beer stone and scale. Safety Precautions: Causes severe skin burns and eye damage Do not breathe fume, mist, or spray. Wear protective gloves and eve protection Wash hands and forearms thoroughly after handling Store locked up. Dispose of contents/container in accordance with local regulations. Safety Data Sheet (SDS) Instructions: Acid Rinse Make solution of 1 oz. per 10 gallons of water.  Circulate the solution for 15-20 minutes at a temperature of 50°-140°F  Drain, rinse, and sanitize before use. Acid Wash Make solution of 1 oz. per 1 gallon of water.   Circulate the solution for 15-20 minutes at a temperature of 50°-140°F  Drain, rinse, and sanitize before use.  Initial Acid Passivation After cleaning vessel, make a solution of 5 oz. of Acid #5 to 1 gallon of water.  Circulate for 15-20 minutes at a temperature of 120°F.  Drain vessel and ALLOW TO AIR DRY. Vessel must air dry in order to achieve successful passivation. After letting equipment air dry, rinse before sanitizing. Sanitize before use. Repassivation After cleaning vessel, make a solution of 1 oz. of Acid #5 to 1 gallon of water. Circulate for 30 minutes at a temperature of 120°F. Drain vessel and ALLOW TO AIR DRY. Vessel must air dry in order to achieve successful passivation. After letting equipment air dry, rinse before sanitizing. Sanitize before use

Read more less

1/4" male flare fitting to 1/4" barb.  Commonly used with cold plates. Barb will fit 3/16" ID or 1/4" ID tubing.

Read more less

1/4" male flare thread (mft) to 5/16" barb fitting.

Read more less

Swivel nut and stem set. Used to attach 5/16" ID draft or CO2 line to corny keg disconnects. Barb Specifications: Material: Stainless Steel Size: 5/16" Nut Specifications: Material: Brass Finish: Chrome Plated Brass Size: 1/4"

Read more less

Swivel nut and barb for connecting 1/8" ID tubing to a 1/4" flare fitting. Barb Specifications: Material: Stainless Steel Size: 3/16" OD Nut Specifications: Material: Brass Finish: Chrome Plated Brass Size: 1/4" Flare

Read more less

Swivel nut and stem set. Used to attach 3/16" ID or 1/4" ID draft line to corny keg disconnects. Barb Specifications: Material: Stainless Steel Size: 1/4" Nut Specifications: Material: Brass Finish: Chrome Plated Brass Size: 1/4"

Read more less

FLEX FERMENTER Introducing the new Spike FLEX! The FLEX was designed to be the most versatile, upgradable and longest lasting small batch fermenter on the market. With currently over 20 accessories (and counting) you'll never run out of fun toys to bling your FLEX out with. You can use the FLEX as a simple bucket fermenter with an airlock or add some accessories to get you all the way up to a 15 psi capable brite tank and anywhere in between!All hardware shown HERE is included! Flex Features: 304 stainless steel; 1.2mm (18ga) All sanitary welded ports (no-weldless fittings) Designed for 2.5 to 6 gallon batches 7 gallon total capacity 2 psi working pressure Strong seal to keep oxygen and bacteria out Use for pressure transfers to your keg or bottling bucket Etched volume markings Fully polished finish Dimensions: 15" wide by 21¨ tall (to top of airlock) See additional dimensions here Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Airlock port Body Features: 1.5" TC racking port with rotatable racking arm 1.5" TC secondary port for thermometer, sample valve, etc Limited availability in store.  Drop ships from vendor.

Read more less

The Spike Brewing custom Spike extended bracing shelf is a recommended addition when casters or leg extensions are installed. The extended bracing shelf widens the stance of the FLEX making it more stable. This helps when going vertical with the leg extensions or mobile with casters.  Specifications: 304SS Super thick 14ga material Made in the USA Bracing shelf install and instructions:Install + instructions

Read more less

Unfortunately some of us will have to heat our FLEX during the long winter months. No fear, we have the solution! The FLEX heater was carefully engineered to match the heating needs to maintain set temperatures even in the coldest winter garage. It also uses a built in thermostat which stops the heater from getting too warm. This means you get a gentle warming action when your beer drops below your desired temp (opposed to rapid heating which can overshoot or 'cook' your wort). This Spike Brewing heater attaches to their insulated FLEX jacket via Velcro. It is positioned near the bottom cone section of the fermenter where the coldest liquid is. This will give the most even temperature throughout your fermenter (happy yeast!). Specifications: Built in 90F thermostat to prevent the heater from overheating your wort 80 watts of power Durable silicone construction 5' long cord Detailed TC-100 product guide:Product Guide.pdf  

Read more less

Leg extensions are a great option to get th FLEX off the ground. This reduces bending over to take gravity readings, add hops, transfer, etc. The shorty leg extensions are 9” long and the long leg extensions are 18". Both screw directly into the bottom of the FLEX legs. Both sets of leg extensions can be used with the stock leg caps, leveling feet and casters.  *It is recommend to use the extended bracing shelf when using the leg extensions for added stability* Shortly leg extension specifications:  304SS 9" long Top threads for attaching to conical legs Bottom threads for attaching leveling feet and casters Long leg extension specifications:  304SS 18" long Top threads for attaching to conical legs Bottom threads for attaching leveling feet and casters

Read more less

Spike Brewing's TC-100 temp control system will manage both cooling and heating of your FLEX. The digital controller's temp probe inserts into the included thermowell that attaches to the secondary port of the FLEX. Also included is a specially fitted neoprene jacket which features reinforced port holes to reduce the chance of ripping during install. Lastly, (and maybe the coolest item) is Spike Brewing's special insulated tubing. This greatly reduces tube cooling losses and will prevent your cooling lines from sweating all over your floor during the dog days of Summer! Cooling:When the temp in the FLEX rises above the set point of the controller, it will turn on the pump submerged in your cold water reservoir (bucket of ice water, aquarium, glycol chiller, DIY AC chiller, etc). This will pump cold water/glycol through the temp control coil, which mounts to the lid, cooling your beer until it reaches the controller set point. Heating:When the temp in the FLEX falls below the controller set point the optional heater will kick on warming the unit up to the desired temp. Detailed product guide:Product Guide.pdf TC-100 Package:-Digital temp controller (manages heating and cooling)-Insulated tubing-Temp control coil-Thermowell-Neoprene Insulated Jacket-Submersible pump-Temp Coil Quick Connect Fittings TC-100 + Heat Package:-TC-100 Package (above)-Optional heater (for us northern brewers)  Limited availability in store.  Drop ships from vendor.

Read more less

EZ Cap brand, flip top bottle replacement lid.  Includes plastic cap, gasket, and wire cage.

Read more less

When using the Torpedo Buoy™ floating dip tube, you can draw the clearest beer possible from the first pint to the last. Included is a 3" metal dip tube, 23.5" length of 1/4" ID silicone tubing, and stainless steel ball float. This floating dip tube is compatible with any ball lock or pin lock homebrew keg. Sized for 5-gallon kegs, but it can be shortened for use with 1.5 or 2.5-gallon kegs. Instructions

Read more less

This really handy little filter can be used with the Torpedo Keg Buoy or the floating dip tubes included with the Kegmenter and FermZilla Pressure Kit to prevent hops or other solids from getting sucked into the dip tube itself. The 304 stainless 80 mesh is fine enough to filter out hops and many other solids but not so fine that it gets blocked up easily. If you have a FermZilla or stainless Kegmenter this add is a must. Made from HDPE and 304 Grade stainless steel, this product can be boiled or sanitized in the full range of cleaners that we sell. The plastic HDPE is over molded onto the stainless mesh to make a seamless finish. The end cap can easily pop off for cleaning.

Read more less

Weighted cap design keeps the dip tube submerged, maximizing liquid draw and minimizing air intake for consistent performance Prevents hop material and other sediment from clogging your dip tube, ensuring cleaner beer transfers and samples Works seamlessly with Torpedo Keg Buoys, Kegmenter Floating Dip Tubes, and FermZilla Pressure Kits for diverse brewing setups Made with food-grade HDPE and 304 stainless steel, allowing for easy cleaning and sanitization with common brewing cleaners This handy little filter attachment can be used with the Torpedo Keg Buoy, Kegmenter Floating Dip Tube, or FermZilla Pressure Kit to keep hop material from being sucked into the silicone dip tube. This upgrade accessory is especially helpful if you like to dry hop directly in your keg while serving, or if you want to pull clean samples from your FermZilla or Kegmenter during fermentation when there's still a lot of biomatter in solution. Simply remove the metal tube from the ball float, slip the silicone tubing over the barb, then reattach the ball float to one of three clip locations. Made from HDPE and 304 stainless steel, the filter can be boiled or sanitized with the full range of cleaners that we sell. The plastic HDPE is over molded onto the stainless mesh to make a seamless finish. The end cap can easily pop off for cleaning. This updated version of the original Filter Attachment now includes a weighted cap that helps keep the end of the dip tube pointed down and submerged below the liquid surface level.  

Read more less

The steel shot and wax at the bottom of this glass thermometer allows it to float in solutions. This thermometer should not be used to stir the wort, nor should it be used to gauge the temperature of already boiling liquid. Temperature Range: 0-220 F (-10 To 95.5 C). Length: 9" (23Cm).This product uses alcohol, not Mercury, to measure temperature. It does not contain any toxic materials.

Read more less

Flora Danica - Used for specialty fresh & soft cheeses. A popular blend for goat milk cheeses, havarti, baby Swiss, gouda, edam, bleu, cultured butter, buttermilk, sour cream & creme fraiche. -- You will receive: 4 packets Flora Danica Cheese Culture (save extra packets in freezer for future use). Contains: Lactococcus lactis subsp. lactis; Lactococcus lactis subsp. cremoris; lactococcus lactis subsp. lactis biovar; diacetylactis; Leuconostoc mesenteroides subsp. cremoris

Read more less

Old fashioned flour sack towels can be ideal for straining liquids or as a pastry cloth.  Other uses include dusting, polishing, drying dishes, cleaning windows, or for other projects. Includes 2 towels that measure 27.5" x 26.5" each (70cm x 68cm) 100% extra soft cotton, fast drying.Prewashed and preshrunk.

Read more less

This stainless steel flow control disconnect will eliminate the guess work of balancing draft lines. Use the adjustment knob to dial in the ideal flow resistance based on the beverage being served. Flow control disconnects perform better than flow control faucets as they put the point of resistance at the beginning of the beverage line instead of at the end. When beer passes through the flow control apparatus inside the faucet, turbulence will cause carbonation to come out of solution and foaming issues occur.  Flow control disconnects on the other hand have the ability to restrict the flow before the beer enters the beer line so the head pressure created by the beer line keeps the carbonation in solution. 1/4" flare thread for beverage line connection. Please note: make sure your keg post o-rings are in good condition before using this fitting. If they are overly worn and you are not getting a good seal, replace the post o-ring then re-attach the ball lock fitting.

Read more less

Taprite's Variable Flow Control Faucet allows you to adjust your beer flow with a lever right on the faucet, eliminating foaming problems when your beer lines, temperature, or pressure cannot be adjusted to account for multiple beer styles. The self closing feature prevents the accidental loss of beer. The 304 stainless steel interior will not errode or leach metallic flavors into your perfectly poured beverage. The 304 stainless steel exterior is highly polished for a sparkling, mirror finish. Stainless shank assembly (1.75"), stainless in-line compensator, and black faucet handle are included.Special Features: Flow Adjustment Lever, Self Closing, In-Line Flow Control Compensator, Stainless Steel Shank IncludedFaucet Material: Stainless Steel, 304Flat Mount Recommended

Read more less

Reusable high density white foam plugs for test tubes and flasks. Fits 35-45mm openings.

Read more less