Products

Farmhouse Ales defines the results of years of evolution, refinement, of simple rustic ales in modern and historical terms, while guiding today's brewers toward credible--and enjoyable--reproductions of these old world classics.

Read more less

Spigot fits standard 1/2" hose. When the valve is open and closed, the hose does not turn. Small body makes it easy to clean and takes less space than regular spigot. The short spigot design makes it easy to place it closer to the bottom of the primary. Comes assembled with gasket and nut. Fits 1" hole.

Read more less

Express is the fastest Turbo on the planet, fermenting out 6kg of sugar in less than 24 hours and producing very good distillate quality. It is important that water start temperature is correct and only 6kg of sugar is used to get maximum speed. Turbo Carbon is recommended as well,  as it will significantly improve the performance of Express Turbo.

Read more less

Garden Hose Aerator Adapter Connects female garden hose to male or female faucet. Connects male or female aerator to male or female faucet. 15/16" -27 male or 55/64" -27 female X 3/4" male garden hose thread or 55/64" -27 male.

Read more less

Includes only a faucet adapter and coupling nut so you can hook a tap to your corny keg.

Read more less

Faucet body gasket Replacement gasket that seals between a draft faucet and shank.

Read more less

Faucet bonnet, chrome plated brass.

Read more less

This 2-piece solid brass draft faucet cleaning attachment connects to the faucet side of a shank assembly.  Attach some 3/8" ID tubing to the barb and your ready to flush out your draft lines.

Read more less

With this beer faucet cleaning attachment, you can make sure that your beer lines undergo thorough cleaning and washing. You only need to connect this beer faucet cleaning attachment to a pressurized tank of beer-line cleaner to get the best results. Remove the faucet from the shank at the end of the line to be cleaned, and install this beer faucet cleaning attachment in its place. Then, pump the beer-line cleaner through your beer lines until they are thoroughly cleaned and free from dirt, grime, beer stone, and other contaminants. FEATURES Easy-to-attach beer faucet cleaning attachment Beer faucet cleaner attachment made of heavy-duty metal Meets U.S. industry standards Thread: 1-18"-18 Barb: 3/8" Includes washer

Read more less

Beer tap cleaning can be a difficult task, and at the same time, a dirty beer faucet can prevent you from pouring out quality beer. Keep your faucets clean, with our line of stainless steel beer faucet cleaning brushes. Stainless steel brushes outlast and clean more efficiently than nylon. FEATURES Stainless steel brush outlasts nylon brushes Cleans more efficiently than nylon brushes Measures 3/16" in diameter Brush measures 1-1/2" in length and 7" in overall length Not recommended for use on chrome or nickel-plated items NOTES: Not recommended for use on chrome, plastic wine faucets, or nickel-plated items as the stainless steel bristles will wear away the plating exposing the underlaying brass material.

Read more less

Faucet ball washer

Read more less

Facuet friction washer

Read more less

Add height to your faucet handle with a 1" extension. Material: Brass Finish: Chrome Plated Brass Length: 1" Extension Thread Size: 3/8" x 16 UNC

Read more less

Black knob handle that will fit on a faucet or a party keg coupler pump.

Read more less

Keep your beer taps clean and sanitary. Helps keep beer taps clean. Protects taps from fruit files and contamination when not in use. Eliminates the time and waste for wrapping beer taps overnight. Stainless Steel 304 brush wire for long life. Fits almost all beer tap types. (Not Perlick) 2.4" in total length

Read more less

Replacement chrome plated faucet lever collar.

Read more less

Specially designed lock to fit Perlick taps. Secure unauthorized beer handling with this beer faucet lock. The U hasp wraps closely around the faucet tap handle and beer inlet. This leaves no space to move the handle. So can’t open the faucet and hence no beer flows out either. Lock made of Chrome plated Brass and comes with two-set alike keys. Use with Perlick taps only. Chrome plated Brass lock with 2 alike keys set Locks the tap handle to the faucet body in close position. Cannot move and open the tap with the lock around. Eliminates underage access to your draft beer setup. Tamper proof and extremely easy to install and remove. Also fits stainless steel Intertap faucets

Read more less

Made from chrome plated brass, this lock is easy to remove and install on your faucet. It features a hardened steel locking hasp and lock that are keyed alike, a brass tumbler, and two keys.

Read more less

Draft faucet shaft assembly with seat. 304 stainless steel.  

Read more less

Faucet shank barrel sleeve

Read more less

Faucet shank locking ring

Read more less

A faucet spanner wrench is a must have tool for all kegerator owners.  This wrench with the red coated handle is gentler on the hands when using.

Read more less

Used to convert a U.S. faucet spout to European style faucet spout. Helps to reduce foam Pours faster Fits snug in standard US tap spout Faucet not included.

Read more less

Brass, female garden hose fitting with 1/2" barb for tubing.

Read more less

Brass, female garden hose fitting with 3/8" barb for tubing.

Read more less

1/2" npt female pipe cross, stainless steel

Read more less

Female Stainless Steel Quick Disconnect with 1/2'' Female Pipe Thread When used in conjunction with the male quick disconnect, these quick disconnects seal up completely regardless of the liquids direction of flow, while remaining simple and easy to use. It features a 1/2" Female National Pipe Thread on the end for easy connectivity to almost anything.   The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off.    Note: This product will NOT work with Brass or Plastic Quick Disconnects.

Read more less

Female Stainless Steel Quick Disconnect with 1/2" Barb This quick disconnect seals up very well without a lot of work in connecting them. It features a 1/2" Barb on the end for easy connectivity to any 1/2" tubing you may have.The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less.  Gasket temperature range is -40° to 250° F. Open port, does not have shut-off. Note: This product will NOT work with Brass or Plastic Quick Disconnects. Made from 304 stainless steel.

Read more less

Female Stainless Steel Quick Disconnect with 1/2" Male Pipe Thread When used with the male quick disconnect, these quick disconnect seal up very well in either flow direction, without a lot of work in connecting them. It features a 1/2" Male National Pipe Thread on the end for easy connectivity to almost anything.The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60 psi or less.  Gasket temperature range is -40° to 250° F. Open port, does not have shut-off. Please Note: This product will NOT work with Brass or Plastic Quick Disconnects.

Read more less

Fermaid® K is a blended complex yeast nutrient that supplies ammonia salts (DAP), free amino acids (organic nitrogen derived from inactivated yeast), sterols, unsaturated fatty acids, key nutrients (magnesium sulfate, thiamin, folic acid, niacin, biotin, calcium pan­tothenate) and inactive yeast.For best results, Fermaid K should be used in conjunction with an appropriate yeast rehydration nutrient (such as Go-Ferm or Go-Ferm Protect) to assure proper nutrition of cultured yeast from rehydration through completed fermentation. Add 25 g/hL at 1/3 sugar depletion or in two doses; 12.5 g/hL at the end of lag phase and 12.5 g/hL at 1/3 sugar depletion.Fermaid K provides unsaturated fatty acids and sterols. These are important survival factors needed to maintain alcohol resistance and permease activity. They also help keep volatile acidity levels low.Nitrogen is needed for protein synthesis and to maintain cellular growth. Nitrogen from the alpha amino acids contained in Fermaid K is utilized much more efficiently than from the ammonia salts.The cell wall fractions in Fermaid K absorb short and medium chain fatty acids that are toxic to the yeast. They also provide nucleation sites to help keep the yeast in suspension.To UseFermaid K should be mixed with room temperature water before adding to an active fermen­tation to avoid CO2 release and overflowing of tanks or barrels. The amount of water used is not critical. Simply add enough to make a slurry.StorageDated expiration. Store at 18°C(65°F). Once opened, keep tightly sealed and dry.Recommended Dosage1 g/gal    25 g/hL 2 lb/1000 gal

Read more less

Fermaid O is an Organic version of Fermaid K, using an organic source of nitrogen. The organic nitrogen is a superior form, resulting in better results! Organic Nitrogen results a better fermentation with more stable temperature levels. Off aromas and flavors are also decreased. Use 1.5g per gallon.

Read more less

A balanced blend of minerals, proteins, amino acids and vitamins to improve yeast activity during fermentation. Used to quicken or restart fermentation. Suggested dosage rate is 1.0 - 1.5 teaspoons per gallon.

Read more less

This thermometer features a 3" face, 1/2" MPT, and a 6" probe. This thermometer is great for a mash tun but may not be suitable for kettles if you're using an immersion chiller due to it's longer probe.

Read more less

Perfect heating solution for those who want more even coverage and absolute certainty that their PET fermenter will not melt even if the fermenter is empty. Punching in at an ample 30 watts, this heating wrap belt is great when paired with insulation and a temperature controller box to dial in that optimum fermentation profile. 110V plug. Approx. 39" x 9.75"

Read more less