Products
Rahr Red Wheat Malt
Rahr Red Wheat is a pale wheat malt made from North American hard spring red wheat. Pale wheat malt has the sweet malty flavor of other malted grains, but with a hint of fruitiness. Wheat malts are high in protein, which helps produce fuller-bodied beers. Wheat malt can improve head formation and retention, depending upon the other grist constituents. Red wheat has a slight tartness to its flavor not present in white wheat. It also has smaller, harder kernels than white wheat, which can require careful milling. Rahr Red Wheat is suitable for all wheat-style beers. Product Specifications: Color °L : 2.4-3.5 Moisture % Max : 5.0 Protein Total : 12.0 +/- 3.5 Extract FG Min : >80.0 Usage Rate : Up to 50% 55 pound bags also available.
$2.00 - $2.10
Rahr Red Wheat Malt - 55 pound bag
Rahr Red Wheat is a pale wheat malt made from North American hard spring red wheat. Pale wheat malt has the sweet malty flavor of other malted grains, but with a hint of fruitiness. Wheat malts are high in protein, which helps produce fuller-bodied beers. Wheat malt can improve head formation and retention, depending upon the other grist constituents. Red wheat has a slight tartness to its flavor not present in white wheat. It also has smaller, harder kernels than white wheat, which can require careful milling. Rahr Red Wheat is suitable for all wheat-style beers. Product Specifications: Color °L : 2.4-3.5 Moisture % Max : 5.0 Protein Total : 12.0 +/- 3.5 Extract FG Min : >80.0 Usage Rate : Up to 50% 55 pound bags are excluded from flat rate / free shipping offers. Also available by the pound.
$75.00
Rahr Standard 2-Row Malt
Rahr Standard 2-Row is a light-colored base malt made from a blend of North American 2-Row barley varieties. It is darker than most lager malts, but lighter than most pale ale malts. It has moderate protein levels, and good extract yield. Its neutral characteristics make it extremely versatile, and it is widely used by North American craft breweries as a choice base malt for any beer style. Specifications Color °L : 1.8-2.3 Moisture % Max : 4.5 Protein Total : 11.5 ± 0.5 Extract FG Min : >80.0 Usage Rate % : Up to 100% 55 pound bags also available.
$1.85 - $1.95
Rahr Standard 2-Row Malt - 55 pound bag
Rahr Standard 2-Row is a light-colored base malt made from a blend of North American 2-Row barley varieties. It is darker than most lager malts, but lighter than most pale ale malts. It has moderate protein levels, and good extract yield. Its neutral characteristics make it extremely versatile, and it is widely used by North American craft breweries as a choice base malt for any beer style. Specifications Color °L : 1.8-2.3 Moisture % Max : 4.5 Protein Total : 11.5 ± 0.5 Extract FG Min : >80.0 Usage Rate % : Up to 100% 55 pound bags are excluded from flat rate / free shipping offers. Also available by the pound.
$70.00
Rahr Standard 6-Row Malt
Rahr Standard 6-Row is a light-colored base malt made from a blend of American 6-Row barley varieties. 6-row barley has a much higher protein content and enzymatic power than 2-row barley. Inclusion of Standard 6-Row is therefore very advantageous for recipes calling for large proportions of specialty malts, wheat malts, or adjuncts, which have little or no enzymatic power themselves. 6-row barley is also used to match historical beer styles from settings where 2-row barley was not widely available. High proportions of 6-row barley may necessitate the use of adjuncts or require protein rests in mashing. Specifications: Color °L : 2.0-2.5 Moisture % Max : 4.5 Protein Total : 12.0 +/- 1.5 Extract FG Min : >79.0 Usage Rate : Up to 100% 55 pound bags also available.
$1.85 - $1.95
Rahr Standard 6-Row Malt - 55 pound bag
Rahr Standard 6-Row is a light-colored base malt made from a blend of American 6-Row barley varieties. 6-row barley has a much higher protein content and enzymatic power than 2-row barley. Inclusion of Standard 6-Row is therefore very advantageous for recipes calling for large proportions of specialty malts, wheat malts, or adjuncts, which have little or no enzymatic power themselves. 6-row barley is also used to match historical beer styles from settings where 2-row barley was not widely available. High proportions of 6-row barley may necessitate the use of adjuncts or require protein rests in mashing. Specifications: Color °L : 2.0-2.5 Moisture % Max : 4.5 Protein Total : 12.0 +/- 1.5 Extract FG Min : >79.0 Usage Rate : Up to 100% 55 pound bags of grain are excluded from flat rate / free shipping offers. Also available by the pound.
$70.00
Rahr White Wheat Malt
Rahr White Wheat is a pale wheat malt made from North American soft winter white wheat. Pale wheat malt has the sweet malty flavor of other malted grains, but with a hint of fruitiness. Wheat malts are high in protein, which helps produce fuller-bodied beers. Wheat malt can improve head formation and retention, depending upon the other grist constituents. White wheat is easier to mill than red wheat, and more conducive to the haze characteristic of Belgian white beers. Rahr White Wheat is suitable for all wheat-style beers. Specifications: Color Range °L: 2.7-3.8 Moisture Max %: 5 Protein Total %: 12.0 +/- 3.5 Extract FG Dry: >80 Max Usage Rate %: 50 Origin: North America 55 pound bags also available.
$2.00 - $2.10
Rahr White Wheat Malt - 55 pound bag
Rahr White Wheat is a pale wheat malt made from North American soft winter white wheat. Pale wheat malt has the sweet malty flavor of other malted grains, but with a hint of fruitiness. Wheat malts are high in protein, which helps produce fuller-bodied beers. Wheat malt can improve head formation and retention, depending upon the other grist constituents. White wheat is easier to mill than red wheat, and more conducive to the haze characteristic of Belgian white beers. Rahr White Wheat is suitable for all wheat-style beers. Specifications: Color Range °L: 2.7-3.8 Moisture Max %: 5 Protein Total %: 12.0 +/- 3.5 Extract FG Dry: >80 Max Usage Rate %: 50 Origin: North America 55 pound bags are exempt from flat rate / free shipping offers. Also available by the pound.
$75.00
Rainbow Flavors | Root Beer Extract | Old Fashion Recipe | Soda Pop Base
Root beer extract from Rainbow Flavors. Concentrated flavor extract for making your own sodas. Mix with water and sugar, then either carbonate by bottle conditioning with yeast, or force carbonate in a keg. One 2 fl oz bottle makes 4 gallons of soda. Recipes and mixing instructions for different size batches are included.
$9.99
RAPT Bluetooth Thermometer | BrewZilla Gen 4 | RAPT Portal Compatible | Backlit Digital Display
This low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZilla, RAPT Temperature Controller, and RAPT Fermentation Chamber. It will not work without one or more of these devices. By receiving multiple BLE thermometer sensors, the BrewZilla can make smarter and more automated decisions on how to control the brewing or distillation process. For example, a BLE thermometer can be placed into your coolant water so you get an alarm if the temperature is too high, or a BLE thermometer can be put into the middle of the malt pipe so you can more accurately control elements switching on/off to achieve a core malt pipe temperature. RAPT ConnectivityThe new Bluetooth thermometer can connect up to your BrewZilla Gen 4, RAPT Temperature Controller, RAPT Fermentation Chamber and log that temperature data and manipulate fermentation/brewing and distillation profiles in the RAPT Portal. This greatly reduces the need for handwritten records of your brew day as it's all done automatically. The RAPT portal also allows you to see every brew you have done in the past with logged temperatures from the main unit's probe and this digital thermometer. This unit can also be set up to get push notifications to your mobile phone of when to sparge for example. Along with this ease of access and control, the RAPT BrewZilla will also allow you to fully customize your brew day with profiles specifically tuned to your style of brewing or your recipe. For example, you could set up step mash profiles using the core temperature of your mash instead of the cavity below where the BrewZilla's main temp probe is located. Greater accuracy for a more repeatable recipe that results in much better beer! Specifications: Temp Range: -4°F – 572°F (-20°C – 300°C) Probe Length: 8" (20 cm) Note that the probe tip is very sharp Remove black plastic tip before use Plastic tip should be used for storage to avoid punctures / injury Cable Length: 39" (100 cm) Magnetized Backing Plate (Orange) 2 x AAA Batteries (included)
$55.00
Red Airlock Grommet
Replacement airlock grommet for pail lids. Easy removal for cleaning and sanitizing.
$1.00 - $7.99
Red Grape Concentrate
This concentrate can be added to wine to increase color, flavor, & sweetness & does not contain any stabilizers. The concentration is three times regular juice & the Brix is 63.2 - 66.8 1 liter container.
$24.99
Reduless
Reduless is a specialized, copper-infused inactivated yeast for treating negative Volatile Sulfur Compounds (H2S, DMS, etc) in wine. Dissolve .4 to .6g in 6 ml of water per gal of wine. Add immediately to the wine while stirring. Rack or filter after 72 h.
$2.49 - $7.99
Refractometer (Brix & SG)
Refractometers are excellent tools to determine the density of unfermented wort or must, providing quick and accurate readings with only a few drops of sample fluid. This handheld version is packed with features to make it perfect for both brewers and winemakers. The refractometer reports measurements in both °Brix and Specific Gravity, and automatically compensates for temperature. The display has an adjustable focus lens, so there is no need to try and look through the eyepiece while wearing glasses. It is made of durable, lightweight materials, and comes with a protective, hard-shell case, a drop applicator, and a screwdriver in case manual calibration is desired.
$44.99
Regulation Cone for Stout Faucet Spout
Replacement regulation cone for stout faucet spout. Stout Faucet Diagram
$2.50
Regulator Bonnet Gasket
Replacement bonnet gasket for regulator. 2" outer diameter.
$3.50
Regulator Gauge Cage
Made from 304 stainless steel, set of 2, for the front and back of your gauges. These cages will protect your regulator gauges from damage. Works with Micro Matic and NADS regulator.
$19.00
Regulator Inlet Flare Fitting, LH
Regulator inlet flare fitting for primary regulators. 1/4" NPT (left hand) x 1/4" flare Does not include check valve
$2.75
Regulator Inlet Flare Fitting, RH
Regulator inlet flare fitting for primary regulators. 1/4" NPT (Right Hand Thread) x 1/4" flare Does not include check valve
$2.99
Regulator Nut Wrench
Just keep this handy Co2 nut wrench hanging on the regulator inlet and you'll never have to hunt down a wrench when it's time to change your tank. Specifications: 1 1/8" Hex Offset Closed End
$5.00
Regulator Outlet fitting - 1/4" barb
Threaded Nipple with 1/4" O.D. Hose Barb (Right Hand Thread) Right Hand 1/4" NPT to 1/4" barb
$2.99
Regulator Outlet fitting - 3/8" barb
Threaded Nipple with 3/8" O.D. Hose Barb (Right Hand Thread) Right Hand 1/4" NPT to 3/8" barb
$5.99
Replacement 40l Bladder for Bladder Press
Replacement bladder for 40l Speidel Bladder Press. Also fits the Kegland 40l press.
$182.00
Replacement Airlock for Speidel Plastic Fermenters
Replacement airlock for Speidel fermenters and stoppers.
$6.60
Replacement Flat Lid for FermZilla
Replacement Flat Lid for FermZilla. Includes o-ring. Fits all models and sizes of FermZilla fermenters.
$11.00
$39.95
Replacement Malt Pipe for Gen 4 BrewZilla 35L
A replacement malt pipe for the Gen 4 35L BrewZilla. Note: This malt pipe is Not Compatible with Gen 3 or older BrewZillas or DigiBoils. Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos. Dimensions: 11.8" (300 mm) Outer Diameter 10.6" (270 mm) Inner Diameter 18.1" (460 mm) Tall
$83.00
Replacement PRV (100 psi)
The most common relief valve. Fits most Cornelius and Firestone style kegs. Long body with spring with gray top and pull ring. Max. pressure rating: 100 psi
$8.80
Replacement PRV (17 psi)
Replacement pressure relief valve rated to blow at 17 psi. Fits FermZilla and Kegmenter. It is also compatible with homebrew kegs and the KOMOS® CO2 regulator if you desire a lower blowoff pressure.
$7.70
Replacement PRV (35 psi)
Replacement pressure relief valve rated to blow at 35 psi. This is a direct replacement of the PRV featured on the FermZilla and Kegmenter. It is also compatible with homebrew kegs and the KOMOS® CO2 regulator if you desire a lower blowoff pressure.
$7.70
Replacement PRV (65 psi)
Replacement pressure relief valve rated to blow at 65 psi. This is a direct replacement of the PRV featured on the KOMOS® CO2 regulator. The Green PRV can also be used with pressurizable FermZilla models for hydro testing. Note that under normal operation, the FermZilla should always be used with the Red PRV (35psi).
$7.70
Replacement Pump for Marchisio Variable Volume Tanks
Pneumatic air pump for variable capacity (VC) tanks. Features a 3/8 in barbed nipple to attach a length of tubing. Can be used with VC tanks from most manufacturers.
$69.99
Replacement Shuttles for NukaTap® Flow Control Faucet | Gen 2 | Backwards Compatible Retrofit Upgrade Kit
Replacement flow control shuttles for the Gen 2 NukaTap Flow Control faucet. These pieces are only for the flow control apparatus in the faucet, not the NukaShuttle itself. These pieces are backwards compatible with the Gen 1 NukaTap Flow Control model, replacing part numbers 11 and 12 in the diagram image above.
$5.99
Replacement Silicone Elbow for PCO38 Tapping Head
This silicone elbow is a replacement for the elbow provided in the PCO38 Tapping Head Kit. Allowing for a 90° connection between the barb on the yellow liquid plastic carbonation cap and the 6.3 mm OD dip tube provided in the kit. KegLand Part Number: KL26260
$2.20
Replacement Spigot for Speidel Plastic Fermenters
Spigot and collar replacement for Speidel plastic fermenter.
$8.99
Replacement Stainless Steel Temperature Probe for Milwaukee MA830R
The Milwaukee MA830R is the replacement Temperature Probe for the MW102 portable pH/Temp meter. The MA830R has a rugged, easy-to-clean stainless steel body designed to take knocks and comes with a 1 meter cable (meter(s) sold separately). The probe connects quickly and tightly, with no worries of slipping off.
$91.00
