Products
1.5'' Tri-Clamp, Stainless Steel
1.5" Stainless Steel Tri-Clamp
$8.00
1.6'' Diaphragm Regulator Repair Kit
This kit contains everything you need to service your 3700 series TapRite regulator after years of use. It includes a 1.6" diaphragm, capsule, and tank nipple o-ring which are the most common wear and leak points.
$19.99
1/2 Gallon Glass Jug
Great jug for reserving your extra wine in. Closure not included. Closure options: #6 rubber stopper #6.5 rubber stopper 38mm metal cap This item is excluded from free shipping offers
$6.99 - $35.99
1/2 in MPT Hollow Plug - Stainless
1/2" MPT stainless steel hollow plug.
$6.50
1/2 in MPT Solid Plug - Stainless
1/2" MPT stainless steel solid plug. Uses a 7/8" wrench.
$5.25
1/2 in mpt x 3/8 in (1/4" ID) Barb - Stainless
1/2" MPT (male pipe thread) x 3/8" OD (1/4" ID) barb for 3/8" tubing. 304 Stainless Steel.
$5.99
1/2 in mpt x 5/8 in (1/2" ID) Barb - Stainless
1/2" MPT (male pipe thread) x 5/8" OD barb (1/2" ID) for 1/2" ID tubing. This fitting gets improved flow when using with pumps due to the larger 1/2" inner diameter. The 5/8" outer diameter of the barb creates a snug fit for your silicone tubing to stay put. 304 Stainless Steel
$7.20
1/2 in. mpt X 3/8 in. Barb Elbow, Stainless
This 1/2 in. mpt X 3/8 in. Barb Elbow is made from corrosion-resistant 304 Stainless steel.
$6.50
1/2 in. mpt x 5/8 in. (3/8" ID) Barb - Stainless
1/2" MPT (male pipe thread) x 5/8" OD barb (3/8" ID) for 1/2" ID tubing. 304 Stainless Steel
$6.75
1/2" Dual Function Bottle Filler
Dual function - works with or without spring. Outer diameter is 1/2".
$4.99
1/2" FPT x 1/2" MPT Stainless Adapter Fitting
1/2" FPT (female pipe thread) by 1/2" MPT (male pipe thread) stainless steel fitting. 304 Stainless Steel
$7.99
1/2" High Temp O-ring
High temp o-ring fits over 1/2" pipe nipple.
$1.25
1/2" ID Clear Vinyl Tubing
Clear, flexible, and food-safe, this polyvinyl chloride (PVC) tubing is perfect for handling beverages and liquids. Material: PVC (polyvinyl chloride) ID: 1/2" OD: 5/8" Max. Pressure: 25 psi (at 70°F. Higher temperatures lower maximum working pressures.) Max. Temperature: 150°F Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.
$0.90 - $59.99
1/2" ID Silicone Tubing
Tasteless, odorless, and food grade approved from -100F to 500F. This tubing is rated to 20 PSI and will burst at 30 PSI at 70F. It is not recommended for use with an impeller pump or household water pressure. 1/2" ID 7/8" OD 30 PSI Burst at 70F Platinum Cured
$3.80 - $360.00
1/2" MPT x 1/2" Barb, 90° Adapter
Stainless steel 90 degree adapter from 1/2" male pipe thread to 1/2" barb.
$14.99
1/2" NPT Stainless Plug
This square head plug has 1/2" NPT threads and is made from 304 stainless steel. It can be used to plug any of the 1/2" NPT couplers welded onto Spike Brewing kettles.
$7.00
1/2" Racking Cane Holder
Made of plastic. Clips to side of a carboy or bucket. Keeps siphon tube in place during racking. Makes a difficult step much easier. Fits 1/2" tubing.
$3.99
1/2" Vinyl Draft Line Tubing
1/2" ID clear vinyl beverage and gas tubing. Accuflex Bevlex 200 PVC Tubing is used for draft beer transfer and BIB soft drink applications. Its special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer to provide excellent kink resistance and taste protection. NSF-51 Listed. Inside Diameter (ID): 1/2" Outside Diameter (OD): 3/4" Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.
$2.25 - $129.00
1/2'' Auto Siphon Clamp
This clamp will hold the 1/2" auto-siphon in place on your bucket or carboy.
$5.99
1/2'' Auto-Siphon Tip Replacement
Replacement tip for 1/2" auto-siphon
$4.49
1/2'' Barbed Tee, Stainless Steel
1/2” barbed tee, stainless steel.
$6.50
1/2'' Female Flare Thread x 1/2'' Barb, Stainless Steel
1/2" female flare thread x 1/2" barb, stainless steel
$4.25 $2.99
$4.95
1/2'' FPT x 1/2'' MFT, Stainless Steel
1/2" fpt x 1/2" mft, stainless steel
$5.99
1/2'' mpt x 1/2'' Compression, Stainless Steel
1/2" malt pipe thread (mpt) x 1/2" compression fitting. Stainless Steel
$19.99
1/2'' MPT x 1/2'' Male Flare Thread, S/S
1/2" mpt x 1/2" mft, stainless steel
$5.99
$14.95
1/2'' Siphon Stem Tip Replacement
Replacement tip for 1/2" racking cane
$1.00
1/2'' x 1'' SS Nipple, Threaded Close
Stainless steel 1/2" x 1" close nipple. Used for connecting a 1/2" ball valve to a union.
$5.00
1/2'' x 26'' Siphon Assembly
This siphon assembly includes a 1/2" x 26" racking cane with anti-sediment tip, 5' of 7/16" ID clear vinyl tubing, and a large plastic clamp to stop the flow if necessary.
$11.99
1/2'' x 26'' Stainless Steel Racking Cane
1/2" x 26" stainless steel racking cane with anti-sediment tip, uses 7/16" ID tubing
$26.99
1/2'' x 50' Stainless Wort Chiller
An affordable wort chiller made from 50' of 1/2'' Stainless Steel tubing. Uprights are held together by a single hose clamp rather than welding/soldering. You can use a hose thread adapter to attach to your sink.Note: The inner bend on the coils have small indentations that are a natural result of the winding process used during manufacturing. As a bonus these actually help turbulate the cooling water to eliminate laminar flow.Approx. 12.25" diameter, 10.5" to the top coil, 23" to the bend to go over the lip of the kettle.
$116.00
1/2” x 1/2” Splicer - Stainless Steel
Beer line 1/2" x 1/2" stainless steel barbed splicer. Splices 3/8" I.D. Vinyl to 3/8" I.D. Vinyl 3/8" I.D. Vinyl to 1/2" I.D. Poly 1/2" I.D. Poly to 1/2" I.D. Poly Specifications Type: Straight Connectors Material: 304 Stainless Steel O.D.: 1/2" I.D.: 3/8"
$3.49
1/2” x 1/2” Vinyl Tubing Splicer - Stainless Steel
Vinyl beer line 1/2" x 1/2" stainless steel barbed splicer. Splices 1/2" I.D. Vinyl to 1/2" I.D. Vinyl Specifications Type: Straight Connectors Material: 304 Stainless Steel O.D.: 7/16" I.D.: 1/2"
$3.99
$1.25
1/4" Barbed Ball Valve
Plastic ball valve with 1/4" barb fittings on each end.
$9.99 $6.99
