Search results for "evabarrier double wall draft tubing"

If you use different kegs and couplers on a normal basis, save time by add quick disconnects to your draft systems gas line tubing. Place a quick disconnect fitting in the gas line and no tools are needed to disconnect from the gas source. Simply pull back the sleeve on the female side and the connection separates and the gas is shut off. Note: To make a complete set please order the Disconnect Air Coupler. Specifications: Connection: Male Side Length: 1-1/4" Barb: 3/8" O.D. (to fit 5/16" I.D. Gas Hose) Material: Brass (not chrome plated)

Read more less

Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines.  14.5mm for 1/2" OD Tubing.  (12-14mm OD) Stepless Clamp Tool sold separately.

Read more less

Transfer beer from ball lock corny keg to ball lock corny keg with this jumper assembly. Includes 4 feet of 3/16" ID draft tubing and 2 CMB liquid ball lock connectors.

Read more less

Clear, flexible, and food-safe, this polyvinyl chloride (PVC) tubing is perfect for handling beverages and liquids. Fits 3/8" auto-siphons and racking canes. Material: PVC (polyvinyl chloride) ID: .313 (5/16) OD: .4375 (7/16) Max. Pressure: 45 psi (at 70°F. Higher temperatures lower maximum working pressures.) Max. Temperature: 150°F  Sells by the foot or by a 100' roll. Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.

Read more less

Our quick disconnect locks into place with an audible "click," creating a secure, leak—free seal every time. They also allow quick and easy one—handed disconnections by simply pressing the thumb latch. Micro Matic quick disconnect couplings provide a fast, easy and safe way to incorporate a gas shut—off in your draft beer system. FEATURES One handed operation—no tools needed to connect or disconnect Audible "click" asures your connection is secure High flow valve design for maximum flow in a compact coupling Withstand up to 120 PSI Temperature range  -40°F to 180°F (-40°C to 82°C)

Read more less

This hex nut to hex nut beer draft beer line assembly will connect a sanke coupler to a faucet shank. Includes: 5' of 3/16 ID clear vinyl draft tubing 2 x 304 stainless steel barbed tailpiece 2 x hex nut (chrome plated brass) 2 x hex nut washer 2 x 13.3 stepless oetiker clamp

Read more less

Stainless steel elbow tailpiece with 3/8" Barb

Read more less

This plastic ball lock cap features soda bottle threads, allowing you to convert a soda bottle into a pressurized growler. It is compatible with both gas and liquid ball lock disconnects. Also works well for cleaning draft lines. Simply add line cleaning solution to a soda bottle, attach it to the draft line, and open the faucet to push solution through. When using two ball lock caps, it is recommend pairing this yellow plastic cap with a red plastic cap so you can easily identify which caps are being used for liquid or gas. This cap can also be attached to the FermZilla collection container, enabling you to purge the collection container of oxygen. Specifications: Liquid and Gas Ball Lock Compatible Overall Length - 2.5" Barb Length - 7/8" Barb OD - 1/4" Barb ID - 3/16" 28 mm PCO 1881 Threads

Read more less

This Duotight ball valve can be used as an inline shut off valve on beverage lines. Compatible with EVABarrier 9.5 mm OD tubing.Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

Tasteless, odorless, and food grade approved from -100F - 500F. This tubing is rated to 20 PSI and will burst at 30 PSI at 70F. It is not recommended for use with an impeller pump or household water pressure. 5/16" ID  1/2" OD Will burst at 30 PSI at 70F

Read more less

This ball lock to hex nut beer draft beer line assembly will connect a corny keg liquid post to a faucet shank. Includes: 5' of 3/16 ID clear vinyl draft tubing 1 x CMB liquid out corny keg connector, 1/4 mfl 1 x 1/4" swivel stem (stainless steel) with nut (chrome plated) 1 x 304 stainless steel tailpiece 1 x hex nut (chrome plated brass) 1 x hex nut washer 2 x 13.3 stepless oetiker clamp

Read more less

1/2" Hole, 9/16" Barb Shank TailpieceShank Tailpiece for 1/2" ID HoseNickel Plated

Read more less

The KOMOS® gas manifold features 1/4" flare gas inlet and check valves for much more flexibilty when choosing your draft line. Use 1/4" or 5/16" gas line with the appropriate Flare Fitting Set (1/4 Swivel Set or 5/16 Swivel Set), or use EVABarrier Draft Tubing with the appropriately sized Duotight fitting (8mm Flare Fitting or 9.5mm Flare Fitting). The check valves can also be replaced with a Gas Ball Lock Post Bulkhead, allowing for the use of a gas-in ball lock jumper line as a quick connect option. If more than 4 outlets are needed, join multiple manifolds together with this 1/4" Gas Manifold Nipple. Features: 1/4" Flare connections 1/4" BSP ball valves Rated to 100 psi Wall mount holes Made from aluminum, brass, and stainless steel Manifold Overall Length 2-Way: 5.25 inches 3-Way: 7.25 inches 4-way: 9.25 inches  The above measurements are from the tip for the brass flare inlet to the plug on the opposite end. Each manifold measures approximately 3.5" from the mounting holes to the tip of the valve.

Read more less

Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines.  16.5mm for 5/8" OD Tubing.  (14-16mm OD) This will fit our 5/16" ID clear/red draft tubing that is commonly used for gas/co2 line. Stepless Clamp Tool sold separately.

Read more less

5/8" silicone tailpiece gaskets for draft shanks or keg couplers. 10 Pack of washers.

Read more less

The Nukatap Counter Pressure Bottle Filler is a great way to fill bottles directly from your taps without compromising your kegged beer’s flavor, aroma or carbonation levels. It's completely made from stainless steel with no aluminum or brass components. This enables you to use a wide range of chemicals for cleaning this device without the risk of damaging the device or accessories. It's very compact and will fit any tap with 10.0 mm inner diameter spout/nozzle or with a 3/8" thread. To use this device simply connect CO2 gas line to the filling unit and away you go. The integrated counter pressure relief valve gives you good control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. This cannot be used with taps with a vent hole but will fit pretty much all forward-sealing taps on the market such as the Nukatap SS, Nukatap FC, Intertap, Perlick 600-series and other brands. This unit is designed to fill multiple sizes of beer bottles up to 500 mL thanks to the telescopic filling stem. We recommend starting with it fully extended, then insert the stem till your at the bottom of the bottle, purge the bottle with CO2, then press the stem all the way in to form a seal on your bottle. This unit comes complete with a wide range of accessories including carbonation caps so you can quick disconnect your beer line, Duotights so you can fit a beer line to the unit and other usefull fittings you might need. Includes: All stainless steel counter pressure filler Push-in spout compatible with forward-sealing faucets (2) 8 mm Duotight adapters for filler and NukaTap spout (2) Ball Lock Post Adapters (Red / Yellow) 19.5" length of 8 mm OD x 5 mm ID EVABarrier tubing

Read more less

Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines.  12.8mm for 7/16" OD Tubing.  (10.5-12.5mm OD) This will fit our 3/16" ID clear/black draft tubing. Stepless Clamp Tool sold separately.

Read more less

Splice together 3/16" ID and 3/8" ID tubing with this 303 stainless steel hose splicer.

Read more less

3-way horizontal gas manifold without safety pressure release. 3/8" barbed inlet (3) 5/16" barbed shut-offs Shut-offs do not include check valves Aluminum body

Read more less

Stainless steel barbed splicer generally used for attaching two pieces of beer draft line. Specifications 304 Stainless Steel OD: 1/4" ID: 1/16" Splices Tubing Sizes 3/16" I.D. Vinyl to 3/16" I.D. Vinyl 3/16" I.D. Vinyl to 1/4" I.D. Poly 1/4" I.D. Poly to 1/4" I.D. Poly

Read more less

The KOMOS multi draft tool is a handy and inexpensive tool that every homebrew kegger should have in their toolbox.  It's really useful for the most common fittings that you are likely to see in a home draft system, and Duotight users will appreciate the handy removal tool for 8 mm and 9.5 mm fittings. Functions: CO2 Regulator Nut Spanner Shank Hex Nut Spanner Faucet Coupling Ring Pin Wrench Flare Swivel Nut Spanner 8 mm Duotight Removal 9.5 mm Duotight Removal Bottle Opener

Read more less

The Monotight Elbow Piece is suitable for 6.35 mm (1/4") PE tubing or most lines with a 6.35 mm outer diameter. It is designed for use with stiff PE tubing that is commonly used in water treatment equipment, water filters, reverse osmosis fittings, and other appliances that are directly connected to water lines. These fittings will not fit 8 mm or 9.5 mm OD EVABarrier line Monotight push in fittings have been engineered for maximized performance in both gas and liquid applications. No other push ins on the market have EPDM o-rings. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-ring made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)  Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.

Read more less

3/16" ID stainless steel tailpiece commonly used for 3/16" ID draft tubing. 304 Stainless Steel  

Read more less

If you use different kegs and couplers on a normal basis, save time by add quick disconnects to your draft systems gas line tubing. Place a quick disconnect fitting in the gas line and no tools are needed to disconnect from the gas source. Simply pull back the sleeve on the female side and the connection separates and the gas is shut off.   Note: To make a complete set please order the Disconnect Tailpiece or Disconnect Nipple with Hose Barb. Specifications: Connection: Female Side Length: 3-1/4" Barb: 3/8" O.D. (to fit 5/16" I.D. Gas Hose) Material: Brass Shut-off: Built in

Read more less