Search results for "evabarrier 8 mm double wall draft tubing"
Duotight Ball Lock Quick Disconnect (9.5mm) - Beverage Out
The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world. Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required This particular ball lock disconnect has been designed for use with EVABarrier 9.5 mm OD Tubing. Due to the integrated Duotight fitting the line will simply push directly into this fitting. Ball Lock Quick Disconnect - Beverage Out Direct connect 8 mm OD EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning
$8.80
Duotight 9.5 mm (3/8 in.) x 1/2 in. Bulkhead
This Duotight Bulkhead is the same one used for installing the Temp Twister cooling coil into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 9.5 mm OD Tubing or 3/8" OD stainless or copper tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$6.60
Duotight 9.5 mm (3/8 in.) Tee
This Duotight tee fitting is compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$3.70
KOMOS® Stainless Draft Tower With Stainless NukaTap Faucets
KOMOS® stainless steel draft tower with stainless steel NukaTap faucets, EVABarrier draft line, and Duotight push-to-connect fittings. These are the same tower kits inlcuded with the KOMOS Kegerator.Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. Each tower kit comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free.Includes: Stainless steel draft tower Stainless Steel NukaTap faucet(s) (Intertap Faucets Pictured) Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 13.4 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar)
$116.49 - $255.49
Stainless Carbonation and Line Cleaning Cap - Duotight Compatible
This stainless steel ball lock cap features soda bottle threads, allowing you to convert a soda bottle into a pressurized growler. It is compatible with both gas and liquid ball lock disconnects. Also works well for cleaning draft lines. Simply add line cleaning solution to a soda bottle, attach it to the draft line, and open the faucet to push solution through. This is a direct replacement to ball lock fittings included with the FermZilla pressure kit. It can also be attached to the FermZilla collection container, enabling you to purge the collection container of oxygen. 28mm PCO 1881 Threads This version features a 6.5mm Duotight compatible stem. Use the 8mm or 9.5mm reducer to attach EVABarrier draft line.
$15.50
KOMOS® Deluxe Kegerator - Refrigerator Only
Limited supply in-store available for pickup. Drop Ships from Vendor. Refrigerator only option does not include tower, faucets, duotight connectors, and tubing. The KOMOS Deluxe Kegerator offers a stunning set of features that clearly separate this unit as the most modern kegerator on the market. With more interior space than other models, the KOMOS Kegerator is designed to fit up to four 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. The KOMOS Deluxe Kegerator model features an eye-catching stainless steel extrerior and upgraded stainless steel drip tray. Choose from stainless steel NukaTap or NukaTap Flow Control forward-sealing faucets with 1 to 4 tap tower. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated tower, the NukaTap faucets are mounted to a stainless steel tower that remains cool before, during, and after each pour thanks to a tower fan diverter that recirculates cold air within the kegerator and blows it up into the tower to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator. This unit features an extended range digital controller that can adjust internal temperatures from 26 - 82°F. The higher end of this range is really convenient for homebrewers who often want to ferment at temperatures around 70°F. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. All kegerators come with your choice of NukaTap SS or NukaTap Flow Control faucets mounted on a stainless tower. NukaTap is the newest brand of forward sealing faucets that boast a lower thermal mass for reduced first pour foam. They feature a "nuke-shaped" internal shuttle that is made from TPV, which provides superior laminar flow to further reduce foaming issues. If you prefer all stainless steel components in your beer faucet, we would suggest the kegerator configuration that comes with Intertap faucets. All faucet spout attachments and accessories are cross compatible between Intertap and NukaTap. The flow control model is a great option for users that often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Instantly make adjustments as you pour to dial in the flow rate. This is also a super convenient feature for when you want to grab a quick growler on your way out. By dialing back the flow rate, you can gently fill your growler so CO2 stays in solution and your beer doesn't pour flat when it comes time to share. The NukaTap Flow Control faucet is also the first FC model to be fully compatible with the optional self-closing spring. Our kegerators come standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. The KOMOS kegerator boasts a list of other unique features for a kegerator in this price range, such as the tower fan, included KOMOS CO2 regulator, aluminum floor, rolling casters, and stainless steel countertop drip tray. Feature Summary: Stainless Steel Air Cooled Tower NukaTap Stainless Steel Forward-Sealing Faucets Choose faucet model and number of taps above Duotight Fittings make connecting draft lines a breeze Digital Thermostat with wide 26 - 82° F temp range. Robust KOMOS Dual Gauge Regulator included CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless steel door, top cover, and side panels Stainless Countertop Style Drip Tray Aluminum floor for additional keg support Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x line of varying length depending on number of taps (2, 2.5, or 3m) 4 Tap model includes uncut rolls of bev & gas line We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.) Gas lines can be cut to whatever length best suits your needs Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines (2, 3, 4 tap only) You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend the Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. Flare connection For commercial sanke keg couplers we recommend Duotight 8mm (5/16) x 5/8 Female Beer Thread connection Available Kegerator covers and "off road" casters for moving over uneven terrain Detailed instructions on assembly and use Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall (fridge only) 35" with Caster wheels 48.75" with tower 51" with Casters and Tower 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 6 Gal. Torpedo Keg - 3 5 Gal. Megamouth Torpedo Keg - 1 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 (1) 5.16 Gal. Sixth Barrel Keg + (1) 7.75 Gal. Slim Quarter Keg 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 Kegerator Instruction Manual. (The Deluxe Kegerator does not have feauture a Guard Rail as seen in the residental kegerator instructions.) Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator. Refrigerator only option does not include tower, faucets, duotight connectors, and tubing. Komos® is a registered trademark owned by MoreFlavor, Inc.
$879.99
Liquid Coupler, Pin Lock 3-Pin
This CM Becker pin lock style disconnect is made in Germany and assembled in the USA. It is for the three pin liquid connection and features a short body and a 1/4" flare connection. Most commonly, you will need a 1/4" swivel nut with 1/4" barb to connect the standard 5/16" red gas line. For EvaBarrier tubing, a Duotight 8mm with 1/4 flare fitting is a common connector.
$8.00
Nukatap Counter Pressure Bottle Filler
The Nukatap Counter Pressure Bottle Filler is a great way to fill bottles directly from your taps without compromising your kegged beer’s flavor, aroma or carbonation levels. It's completely made from stainless steel with no aluminum or brass components. This enables you to use a wide range of chemicals for cleaning this device without the risk of damaging the device or accessories. It's very compact and will fit any tap with 10.0 mm inner diameter spout/nozzle or with a 3/8" thread. To use this device simply connect CO2 gas line to the filling unit and away you go. The integrated counter pressure relief valve gives you good control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. This cannot be used with taps with a vent hole but will fit pretty much all forward-sealing taps on the market such as the Nukatap SS, Nukatap FC, Intertap, Perlick 600-series and other brands. This unit is designed to fill multiple sizes of beer bottles up to 500 mL thanks to the telescopic filling stem. We recommend starting with it fully extended, then insert the stem till your at the bottom of the bottle, purge the bottle with CO2, then press the stem all the way in to form a seal on your bottle. This unit comes complete with a wide range of accessories including carbonation caps so you can quick disconnect your beer line, Duotights so you can fit a beer line to the unit and other usefull fittings you might need. Includes: All stainless steel counter pressure filler Push-in spout compatible with forward-sealing faucets (2) 8 mm Duotight adapters for filler and NukaTap spout (2) Ball Lock Post Adapters (Red / Yellow) 19.5" length of 8 mm OD x 5 mm ID EVABarrier tubing
$87.99
Gas Coupler, Pin Lock 2-Pin
This CM Becker pin lock style disconnect is made in Germany and assembled in the USA. It is for the two pin gas connection and features a short body and a 1/4" flare connection. Most commonly, you will need a 1/4" swivel nut with 5/16" barb to connect the standard 5/16" red gas line. For EvaBarrier tubing, a Duotight 8mm with 1/4 flare fitting is a common connector.
$8.00
Duotight 9.5 mm (3/8 in.) Ball Valve
This Duotight ball valve can be used as an inline shut off valve on beverage lines. Compatible with EVABarrier 9.5 mm OD tubing.Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$5.00
BlowTie 2 Diaphragm Spunding Valve with Gauge
The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style of spunding valve is much more accurate than the poppet style. The 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing. The BlowTie 2 features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The gauge is removable and can be swapped out with a gauge of a different pressure range. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-15 psi WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge.
$22.00
KOMOS® Aluminum Gas Manifold - 1/4" Flare
The KOMOS® gas manifold features 1/4" flare gas inlet and check valves for much more flexibilty when choosing your draft line. Use 1/4" or 5/16" gas line with the appropriate Flare Fitting Set (1/4 Swivel Set or 5/16 Swivel Set), or use EVABarrier Draft Tubing with the appropriately sized Duotight fitting (8mm Flare Fitting or 9.5mm Flare Fitting). The check valves can also be replaced with a Gas Ball Lock Post Bulkhead, allowing for the use of a gas-in ball lock jumper line as a quick connect option. If more than 4 outlets are needed, join multiple manifolds together with this 1/4" Gas Manifold Nipple. Features: 1/4" Flare connections 1/4" BSP ball valves Rated to 100 psi Wall mount holes Made from aluminum, brass, and stainless steel Manifold Overall Length 2-Way: 5.25 inches 3-Way: 7.25 inches 4-way: 9.25 inches The above measurements are from the tip for the brass flare inlet to the plug on the opposite end. Each manifold measures approximately 3.5" from the mounting holes to the tip of the valve.
$27.50 - $38.50
Duotight 8 mm (5/16 in.) Ball Valve
This Duotight ball valve can be used as an inline shut off valve on draft lines. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$3.90
Duotight Removal Tool and Tube Cutter
This 2-in-1 tubing cutter is hard to beat for clean, straight cuts. It is developed specifically for EVABarrier draft line, but is also compatible with any tubing that is 3/8" OD or smaller. Features a 8mm jaw on the back of the unit to easily pull the collet back when removing tubing from Duotight fillings.
$6.60
3/8" Vinyl Draft Line Tubing
3/8" ID clear vinyl beverage and gas tubing. Accuflex Bevlex 200 PVC Tubing is used for draft beer transfer and BIB soft drink applications. Its special dual durometer construction combines a low extraction inner contact surface with a flexible outer layer to provide excellent kink resistance and taste protection. NSF-51 Listed. Inside Diameter (ID): 3/8" Outside Diameter (OD): 5/8" Clamp Size: 18.5mm Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.
$1.80 - $110.00
KOMOS® Rubicon Cold Plate Jockey Box (2 Tap)
The KOMOS Rubicon Jockey Box is perfect for low-volume home applications like picnics, cookouts, and tailgaters. Built around the ultra-tough, rotomolded Rubicon Cooler and featuring the aluminum cast Slimline cold plate for compact, efficient cooling. The cooler comes with pre-drilled holes and only takes minutes to assemble. Along with the cooler and cold plate, this draft box kit includes stainless steel Intertap faucets, stainless shanks, self-closing faucet springs, tap handles, EVABarrier draft line, and Duotight fittings for all connections. Rubicon CoolerRotomolded body makes this cooler virtually indestructible, while high density polyurethane insulation and compression lid will keep the contents ice-cold for days on end. Rope handles with molded grips make the Rubicon easy to move around, and lockable lid will keep out beverage bandits and bears alike. Slimline Cold PlateThe KOMOS Slimline Cold Plate is made from rugged aluminum casting with a large thermal mass for excellent heat absorption. High conductivity aluminum alloy aids the heat transfer as your beverage travels through the internal 18 ft. long stainless steel lines. Duotight Fittings & EVABarrier Draft Tubing Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. We recommend adding Duotight fittings to use for your keg connections as well, not included. Features: Rubicon Cooler Rotomolded body High density polyurethane insulation Lockable compression lid with high quality seal Polyester rope handles with molded grips Rubber feet Side drain outlet 23.5" x 16.25" x 16.5" Slimline Cold Plate Aluminum cast 18 ft. internal lines made from 304 stainless steel 1/4" male flare connections 15" x 10" x 1" 2 x Intertap Stainless Faucets w/ Self-Closing Springs 2 x Intertap Stainless Draft Shanks 2 x Black Plastic Tap Handles 39 ft. roll of EVABarrier tubing (8 mm OD x 5mm ID) Duotight push-in fittings for all connections
$530.00
Push-in 9.5 mm (3/8 in.) Check Valve
Compatible with EVABarrier 9.5 mm OD tubing. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Made from food-grade acetal plastic Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$7.99 $4.99
KOMOS® Premium Dual Body CO2 Regulator
Send different pressures to two separate kegs from the same CO2 tank with the KOMOS Dual Body Regulator. This industrial gauge regulator aims to be the last regulator you'll ever need. Large dual-body and precision diaphragms provide high flow rates, and pressure settings are quickly and easily dialed in the with hand knobs. The pressure gauges are made from thick stainless steel and come with rubber bumpers for an extra layer of protection. Triple-scale dial faces read in psi, bar, and kPa. Comes with 1/4" flare fitting with barbed outlets. Included Duotight adapters allow the regulator to be easily used with EVABarrier draft tubing. Features: 0–60 PSI operating range Low pressure gauge reads from 0–100 Pull ring PRV rated to blow off at 65 PSI Strong, robust design Highly accurate precision diaphragm Easily adjusted by hand 1/4" flare fitting with barbed outlet Duotight adapter fitting included for use with EVABarrier draft tubing Heavy duty steel gauges with rubber bumpers M6 mounting screw holes Made in accordance with AS 4267 Made in China Warning: This product contains lead and/or lead compounds, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warning.ca.gov
$110.00
KOMOS® Matte Black Draft Tower With NukaTap Faucet(s) (w/ Duotight Fittings)
KOMOS matte black draft tower with NukaTap faucets, EVABarrier draft line, and Duotight push-to-connect fittings. These are the same tower kits included with the KOMOS Kegerator. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. Each tower kit comes with Duotight fittings for the tower shanks and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free. Includes: Stainless steel draft tower w/ Matte Black Finish NukaTap Stealth Bomber faucet(s) Stainless steel faucet shank(s) with Duotight tailpieces EVABarrier gas and beverage tubing Draft tower mounting screws Faucet wrench 1-3 Tap Tower Dimensions: 13.4 in. tall (without faucets) 3 in. tower diameter 4.4 in. base diameter 4 Tap Tower Dimensions: 13.4 in. tall (without faucets) 4.5 in. tower diameter Interior mounting holes (does not include bottom collar)
$127.00 - $275.00
Monotight - 6.35 mm (1/4 in.) Joiner
This Monotight joiner fitting is compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.
$2.00
KOMOS® Premium Dual Gauge CO2 Regulator | Tool-Free One-Handed Tank Connection | 0–60 PSI
The most high-quality KOMOS regulator, featuring an integrated nut-hand-wheel that allows for effortless, one-handed tightening to your CO2 cylinder Internal components are accessible from the backplate for easy cleaning and servicing Includes a Duotight adapter for EVABarrier tubing and a 1/4" flare fitting with barb, allowing for quick and adaptable gas line setups The PRV is rated to 65 psi and can be swapped out with 17-psi, 35-psi, or 100-psi rated PRVs if desired Rubber gauge protectors safeguard gauges from potential damage Compatible with standard US CO2 tanks The robust body and precision diaphragm provide high flow rates, and the pressure can be easily and precisely adjusted with the hand dial. Extra thick stainless gauges come with rubber bumpers for added protection. The dial faces are triple-scaled to read in psi, bar and kPa. The PRV is rated to 65 psi (4.5 bar) for added safety while in use. Comes with male flare thread gas-out with included 1/4" barb and nut. Easily swap out the barb to a different size if desired. On the back of the regulator body are three M6 screw holes for mounting (screws not included). Each KOMOS regulator includes a Duotight Adapter, allowing for quick connection of EVABarrier draft tubing for a solid, yet easy to change, way of connecting gas line. Add Duotight Tees to easily split the line to multiple kegs. Features: One-handed Cylinder Tightening: Attach the regulator to your CO2 cylinder effortlessly with one hand using the integrated nut-hand-wheel. No separate spanner or wrench is needed! This is made possible by a new spigot seal design that compresses easily without the risk of damage or leaks. Simplified Self-Servicing: Maintain your regulator with ease by accessing the internal components from the backplate. Simply use an 8mm hex/Allen key to remove the regulator knob and access the internals for cleaning, eliminating the need for a vise or specialized tools. Flared Output: The regulator features an output with 1/4" male flare connection. Each regulator comes with a 1/4" barb and nut as well as an 8mm Duotight adapter for use with your preferred tubing. Triple-Scale Gauge: Monitor your CO2 pressure accurately with the Class 2.5 gauge, featuring PSI, bar, and kPa scales for easy reading (+/- 2.5% accuracy). Durable Seat Cap Assembly: The new seat cap is constructed from ultra-high molecular weight polyethylene, providing exceptional resistance to wear and tear. This robust design minimizes the risk of scratching and brass filings, which can lead to pressure creep, even under demanding conditions like forced carbonation. Reinforced Steel Gauges: Benefit from enhanced durability with thicker steel gauges built to withstand rigorous use. Color-Coded PRV: This regulator includes a 65 PSI green PRV (pressure relief valve). This can be swapped to the Red (35 PSI) or Gray (100 PSI) PRV if desired. Easy Mounting: Integrated M6 mounting holes allow for secure and convenient installation. Note that the nut-wheel needs to be removed for flush mounting. Specs: 0–60 PSI operating range Low pressure gauge reads from 0–100 Pull ring PRV rated to blow off at 65 PSI 1/4" & 5/16" barb fittings included Duotight adapter for EVABarrier tubing included Standard US CO2 Threads (CGA320) Gauge protectors M6 mounting screw holes Made in accordance with AS 4267
$75.00
