Search results for "duotight ball lock quick disconnects"
Ball Lock Jumper Post
Make your cleaning day a breeze with this QD Jumper post. No need to remove the Ball lock disconnects at all. The cleaner solution goes right through the Ball Lock Keg cleaning post. Connect multiple beer lines and Ball lock kegs in a daisy chain and clean them all in one go. Specifications: Made of Stainless steel material. Includes O rings on both ends. Jumper between the beer lines for easy cleaning. Ball lock kegs are widely used in home-brewing. Hence a handy tool for all home-brewers. Note: Pictured ball lock coupler not included.
$7.50
Intertap Tower Shank
This stainless steel Intertap Tower Shanks will fit in any 3" diameter draft tower. The 1/4" tailpiece is Duotight compatible and pairs perfectly with the Duotight 6.5 mm x 8 mm reducer, allowing you to quickly and easily connect 8mm OD EVABarrier draft line. Duotight fitting pictured is sold separately. Please note these shanks are not compatible with Perlick brand faucets. WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
$19.50
Liquid Coupler, Pin Lock 3-Pin
This CM Becker pin lock style disconnect is made in Germany and assembled in the USA. It is for the three pin liquid connection and features a short body and a 1/4" flare connection. Most commonly, you will need a 1/4" swivel nut with 1/4" barb to connect the standard 5/16" red gas line. For EvaBarrier tubing, a Duotight 8mm with 1/4 flare fitting is a common connector.
$8.00
Duotight 9.5 mm (3/8 in.) Ball Valve
This Duotight ball valve can be used as an inline shut off valve on beverage lines. Compatible with EVABarrier 9.5 mm OD tubing.Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$5.00
Duotight 9.5 mm (3/8 in.) x 1/2 in. BSP Ball Valve
This Duotight ball valve with 1/2" male thread is perfect for attaching to the water input on the Copper Counterflow Chiller, allowing you to adjust the water flow while chilling your wort. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$5.00
5/16'' Beer & Gas Tubing QD Set - In-line W/ Shut-off
Our quick disconnect locks into place with an audible "click," creating a secure, leak—free seal every time. They also allow quick and easy one—handed disconnections by simply pressing the thumb latch. Micro Matic quick disconnect couplings provide a fast, easy and safe way to incorporate a gas shut—off in your draft beer system. FEATURES One handed operation—no tools needed to connect or disconnect Audible "click" asures your connection is secure High flow valve design for maximum flow in a compact coupling Withstand up to 120 PSI Temperature range -40°F to 180°F (-40°C to 82°C)
$21.99
Gas Ball Lock, SS Barbed
304 Stainless steel ball lock gas (in) connector with 1/4" barb connection.
$21.99
Duotight Push-In Fitting - 8mm (5/16 in.) x 8mm (5/16 in.) Male Elbow
This Duotight to Male Elbow fitting can be used to route tubing connecting to 8 mm Duotight Ball Lock QDs. This is a great way to keep tubing organized and out of the way in your kegerator. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals.
$2.50
Liquid Ball Lock Post for Sanke Coupler
Adapt your sanke style coupler to accept a ball lock coupler with this stainless steel fitting. Liquid ball lock post for sanke coupler. Stainless Steel
$15.50
Intertap Ball Lock Spout
Attach this fitting to convert your Intertap faucet to a ball lock quick disconnector.
$13.50
Camlock Type C
Type C camlock disconnect fitting. Female camlock with 1/2" Barb (13mm). 304 Stainless steel construction. 150 psi working pressure.
$14.50
Beverage Ball Lock, SS Barbed
304 Stainless steel ball lock liquid (beverage out) side connector with 1/4" barb connection.
$21.99
Tapcooler Ball Lock Adapter
Easily connect a gas ball lock fitting into your Tapcooler Counter Pressure Bottle Filler with this handy ball lock CO2 adapter! Made of aluminium.
$14.99
Beverage Ball Lock, SS Flared
304 Stainless steel ball lock liquid (beverage out) side connector with 1/4" flare connection.
$19.99
Gas Coupler, Pin Lock 2-Pin
This CM Becker pin lock style disconnect is made in Germany and assembled in the USA. It is for the two pin gas connection and features a short body and a 1/4" flare connection. Most commonly, you will need a 1/4" swivel nut with 5/16" barb to connect the standard 5/16" red gas line. For EvaBarrier tubing, a Duotight 8mm with 1/4 flare fitting is a common connector.
$8.00
NukaTap Mini Beer Faucet | Duotight Adapter | 8 mm (5/16")
This Duotight 8 mm (5/16") adapter is designed to suit the Nukatap Mini and will allow you to couple the faucet to a wide range of other 8 mm Duotight fittings. This includes attaching it to the Duotight Flow Control Ball Lock Disconnect. This particular type of flow control ball lock disconnect includes a "tang" at the top of the push in fitting that couples with this adapter. The combination of the two fittings prevents the faucet from spinning around while in use.
$7.70
Poppet Valve CMB Disconnects
Replacement poppet valve for all CMB ball lock disconnects.
$1.99
Duotight 9.5 mm (3/8 in.) x 1/2 in. BSP
This Duotight fitting with 1/2" male thread is perfect for attaching to the Copper Counterflow Chiller and using with 1/2" female threaded Camlock and QD fittings. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$3.30
Camlock Type B
Type B camlock disconnect fitting. Female camlock with 1/2" Male Pipe Thread (MPT). 304 Stainless steel construction. 150 psi working pressure.
$15.50
Camlock Type E
Type E camlock Disconnect fitting. Male camlock with 1/2" Barb (13mm). 304 Stainless steel construction. 150 psi working pressure.
$8.80
Black Cap Plug CMB Disconnects
Replacement black cap plug for CMB ball lock disconnects.
$1.25
Camlock Type A
Type A camlock disconnect fitting. Male camlock with 1/2" Female Pipe Thread (FPT). 304 Stainless steel construction. 150 psi working pressure.
$9.90
Duotight 8 mm (5/16 in.) x 1/4 in. BSP
This Duotight fitting with 1/4" male thread is a great option for connecting gas line to regulators and manifolds that have 1/4" FPT. Comes with seated O-ring. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$3.30
Ball Lock Adapter Tapping Head for Sanke Kegs
Convert a commercial sanke keg to be used with ball lock fittings. To install, remove the keg spear, place the gasket on the keg ferrule with the beaded side facing up, attach the silicone dip tube and place the tapping head on the ferrule, then secure with the 2" tri-clamp. **Be sure to always depressurize the keg before removing the tapping head.** Includes: Ball Lock Post Lid 2" tri-clamp Single-side beaded tri-clamp gasket 60 cm silicone dip tube (23.6") Red 2.5 bar PRV (36 psi)
$65.00
