Search results for "evabarrier double wall draft tubing 8 mm"

This Kegland beer line tidy is a handle little part that will help you organize your beer and gas line inside your fridge, keezer, kegerator or cellar. Simply remove the paper backing and use the strong 3M adhesive to attach this beer/gas line organizer to whatever device you like. This keeps your beer and gas plumbing neat and tidy so your draft system looks as good as it works. Primarily designed for 8 mm (5/16") OD tubing, but works with 9.5 mm (3/8") OD and 6.35 mm (1/4") OD tubing as well. Note: for best results, apply the adhesive at room temperature and let stand for 72 hours before applying load.

Read more less

The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world.  Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required This particular ball lock disconnect has been designed for use with EVABarrier 9.5 mm OD Tubing. Due to the integrated Duotight fitting the line will simply push directly into this fitting. Ball Lock Quick Disconnect - Beverage Out Direct connect 8 mm OD EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Disassemble by hand for quick and easy cleaning

Read more less

This Duotight tee fitting is compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

This stainless steel ball lock cap features soda bottle threads, allowing you to convert a soda bottle into a pressurized growler. It is compatible with both gas and liquid ball lock disconnects. Also works well for cleaning draft lines. Simply add line cleaning solution to a soda bottle, attach it to the draft line, and open the faucet to push solution through. This is a direct replacement to ball lock fittings included with the FermZilla pressure kit. It can also be attached to the FermZilla collection container, enabling you to purge the collection container of oxygen. 28mm PCO 1881 Threads This version features a 6.5mm Duotight compatible stem. Use the 8mm or 9.5mm reducer to attach EVABarrier draft line.

Read more less

The Nukatap Counter Pressure Bottle Filler is a great way to fill bottles directly from your taps without compromising your kegged beer’s flavor, aroma or carbonation levels. It's completely made from stainless steel with no aluminum or brass components. This enables you to use a wide range of chemicals for cleaning this device without the risk of damaging the device or accessories. It's very compact and will fit any tap with 10.0 mm inner diameter spout/nozzle or with a 3/8" thread. To use this device simply connect CO2 gas line to the filling unit and away you go. The integrated counter pressure relief valve gives you good control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. This cannot be used with taps with a vent hole but will fit pretty much all forward-sealing taps on the market such as the Nukatap SS, Nukatap FC, Intertap, Perlick 600-series and other brands. This unit is designed to fill multiple sizes of beer bottles up to 500 mL thanks to the telescopic filling stem. We recommend starting with it fully extended, then insert the stem till your at the bottom of the bottle, purge the bottle with CO2, then press the stem all the way in to form a seal on your bottle. This unit comes complete with a wide range of accessories including carbonation caps so you can quick disconnect your beer line, Duotights so you can fit a beer line to the unit and other usefull fittings you might need. Includes: All stainless steel counter pressure filler Push-in spout compatible with forward-sealing faucets (2) 8 mm Duotight adapters for filler and NukaTap spout (2) Ball Lock Post Adapters (Red / Yellow) 19.5" length of 8 mm OD x 5 mm ID EVABarrier tubing

Read more less

This CM Becker pin lock style disconnect is made in Germany and assembled in the USA.  It is for the three pin liquid connection and features a short body and a 1/4" flare connection. Most commonly, you will need a 1/4" swivel nut with 1/4" barb to connect the standard 5/16" red gas line. For EvaBarrier tubing, a Duotight 8mm with 1/4 flare fitting is a common connector.

Read more less

This CM Becker pin lock style disconnect is made in Germany and assembled in the USA.  It is for the two pin gas connection and features a short body and a 1/4" flare connection. Most commonly, you will need a 1/4" swivel nut with 5/16" barb to connect the standard 5/16" red gas line. For EvaBarrier tubing, a Duotight 8mm with 1/4 flare fitting is a common connector.

Read more less

This Duotight ball valve can be used as an inline shut off valve on beverage lines. Compatible with EVABarrier 9.5 mm OD tubing.Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style of spunding valve is much more accurate than the poppet style. The 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing. The BlowTie 2 features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The gauge is removable and can be swapped out with a gauge of a different pressure range. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-15 psi WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge.

Read more less

The KOMOS® gas manifold features 1/4" flare gas inlet and check valves for much more flexibilty when choosing your draft line. Use 1/4" or 5/16" gas line with the appropriate Flare Fitting Set (1/4 Swivel Set or 5/16 Swivel Set), or use EVABarrier Draft Tubing with the appropriately sized Duotight fitting (8mm Flare Fitting or 9.5mm Flare Fitting). The check valves can also be replaced with a Gas Ball Lock Post Bulkhead, allowing for the use of a gas-in ball lock jumper line as a quick connect option. If more than 4 outlets are needed, join multiple manifolds together with this 1/4" Gas Manifold Nipple. Features: 1/4" Flare connections 1/4" BSP ball valves Rated to 100 psi Wall mount holes Made from aluminum, brass, and stainless steel Manifold Overall Length 2-Way: 5.25 inches 3-Way: 7.25 inches 4-way: 9.25 inches  The above measurements are from the tip for the brass flare inlet to the plug on the opposite end. Each manifold measures approximately 3.5" from the mounting holes to the tip of the valve.

Read more less