Search results for "spike solo"

20 GALLON STAINLESS BREW KETTLE - V4 Spike Brewing has once again re-designed their brew kettle.  They make one of the best brewing kettles available on the market.  It is the thickest kettle on the market, with US welded fittings (no more weldless fittings) at a factory direct price. Kettle Features: 6 - 15 gallon batch size 304 (18/8) stainless steel  Sanitary welded coupler design (done at our facility in Milwaukee, WI) 1.2mm thick walls (thickest on the market) 5mm tri-clad bottom (induction capable) Internal volume markings Polished finish 17.7¨ wide by 21.4¨ tall Domed bottom design Bottom coupler 1.5" off the bottom (2 gallon mark) Top coupler 6" off the bottom (6.5 gallon mark) Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

Unfortunately some of us will have to heat our conicals during the long Winter months. No fear, Spike Brewing has the solution! Each conical has its own sized heater and the wattage of each is carefully designed to match it. They also use a built in thermostat which stops the heater from getting too warm. This means you get a gentle warming action when your beer drops below your desired temp (opposed to rapid heating which can overshoot or 'cook' your beer). This heater attaches to Spike Brewing's insulated conical jacket via Velcro. It rests on the bottom cone section of the conical where the coldest liquid is. This will give the most even temperature throughout your fermenter (happy yeast!). Specifications: Different wattages for each fermenter (ranging from 80w to 150w) Built in 90F thermostat to prevent the heater from overheating your wort 5' long cord Detailed TC-100 product guide:Product Guide.pdf Limited availability in store.  Drop ships from vendor.

Read more less

An oxygenation kit specifically designed for homebrewing. Oxygenate your wort easily and conveniently with a precise amount of oxygen rather than leaving it to chance.  The Spike Oxygenation (O2) Kit was designed to provide homebrewers with a simple solution for oxygenating their wort prior to fermentation; Happy yeast = happy beer! The days of slow or failed fermentations are over, and a giant 10lb oxygen tank is no longer the only solution! The O2 kit is designed to attach to a standard hardware store oxygen tank and will precisely oxygenate your wort to make sure fermentation goes smoothly! With that precise flow control, eacg oxygen bottle will oxygenate up to 200 gallons of wort; saving you time and money!

Read more less

Want some additional leveling adjustment for your FLEX? Well the Spike Brewing non-marking leveling feet will do the trick! They also use a 304SS stud because nobody likes rust! Specifications: Non marking plastic bottom 304SS stud 3 pack

Read more less

This 1.5” TC butterfly valve can be used on Spike+ kettles. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions.The handle is a special 'shorty' style which keeps a compact design. This handle is made from extremely durable glass reinforced nylon which is much lighter than metal handles. Specifications: 1.5" TC  304SS metal components FDA silicone seals Light and durable fiber reinforced nylon handle Squeeze trigger with 13 locking positions

Read more less

Spike Brewing's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with their full port valves which have a 5/8" flow diameter; no flow restriction. Spike Brewing's proprietary fittings uses quick connect technology. The quick connect fitting simply hand screws into the kettle and the pickup tube easily pushes in/pulls out; no tools needed. Recommend Uses: Boil Kettle - Create a whirlpool inside your kettle so hop material collects in the center of the lower stepped section. The side pickup will drain clear wort from the side, above the stepped bottom, avoiding the hop and trub material which has settled.  Custom Kettles - Works as a top re-circulation arm or a whirlpool arm. Features: One size fits all kettles  Large 5/8" diameter 304 stainless tube Simply push in for seal; no tools required Proprietary stainless push to connect fitting included Rests on top step for clear wort draining Made in the USA

Read more less

30 GALLON STAINLESS BREW KETTLE - V4 Spike Brewing has once again re-designed their brew kettle.  They make one of the best brewing kettles available on the market.  It is the thickest kettle on the market, with US welded fittings (no more weldless fittings) at a factory direct price. Kettle Features: 10 - 20 gallon batch size 304 (18/8) stainless steel  Sanitary welded coupler design (done at our facility in Milwaukee, WI) 1.5mm thick walls (50% thicker than competition) 6mm tri-clad bottom (induction capable) Internal volume markings Polished finish 19.7¨ wide by 24.1¨ tall Domed bottom design Bottom coupler 1.5" off the bottom (2.25 gallon mark) Top coupler 6" off the bottom (8 gallon mark) Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

The Spike Brewing engineers have totally redesigned the 2" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tightened in a criss-cross pattern to get even pressure to avoid leaks. Their new design is made up of only 5 parts compared to 26 parts in a standard sight glass. No tools are required to assemble or disassemble; simply twist the knurled end cap off. The glass is also protected by the stainless guard which protects the glass from even the clumsiest brewer.  The sight glass allows for direct attachment to the bottom port of our conicals. The sight glass allows for monitoring flow, color and clarity. A sight glass is also helpful when collecting yeast. Specifications: 2" TC 304 stainless steel Extra thick Pyrex glass 6” long 25% lighter than previous design   **A 2" gasket and clamp will need to be purchased separately if you do not already have spares**

Read more less

The Spike Brewing insulated FLEX jacket uses high quality, extra thick, yet flexible neoprene material to insulate your FLEX from the worst ambient conditions like a hot garage or cold basement. Each custom designed, hand stitched (in the USA) jacket is custom tailored to fit the FLEX. This jacket was designed by a former Lululemon designer because if you're going to cover up shiny stainless steel it better look amazing. We think she did the trick!   Specifications: Sewn in the USA (of imported fabric from Japan and China) Reinforced stitching around all ports, legs and handles for extra strength Helps maintain stable fermentation temps regardless of ambient conditions Stops the tank from ‘sweating’ in warm weather Interior Velcro for attaching the optional heater Machine washable Detailed TC-100 product guide:Product Guide.pdf 

Read more less

15 GALLON STAINLESS BREW KETTLE - V4 Spike Brewing has once again re-designed their brew kettle.  They make one of the best brewing kettles available on the market.  It is the thickest kettle on the market, with US welded fittings (no more weldless fittings) at a factory direct price. Kettle Features: 5 - 11 gallon batch size 304 (18/8) stainless steel  Sanitary welded coupler design (done at our facility in Milwaukee, WI) 1.2mm thick walls (thickest on the market) 5mm tri-clad bottom (induction capable) Internal volume markings Polished finish 15.8¨ wide by 19.4¨ tall Domed bottom design Bottom coupler 1.5" off the bottom (1.5 gallon mark) Top coupler 6" off the bottom (5 gallon mark) Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

This Spike Brewing 1/2” NPT Brew Thermometer is ready to screw directly into the kettle. This 2.5” stemmed thermometer can cover 40-220 degree ranges. The 3” glass dial will display all the information you need at a glance and while withstanding the high heat from the burner below. The thermometer also has calibration screw for added accuracy. 

Read more less

Spike Brewing's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with their full port valves which have a 5/8" flow diameter; no flow restriction. Spike Brewing's proprietary fittings uses quick connect technology. The quick connect fitting simply hand screws into the kettle and the pickup tube easily pushes in/pulls out; no tools needed. Features: One size fits all kettles  Large 5/8" diameter 304 stainless tube  Simply push in for seal; no tools required Proprietary stainless push to connect fitting included Sized to pick up from the bottom edge of the kettle Made in the USA

Read more less

Spike Brewing's thermowell features a 1/4" temp probe opening on the outside which is mounted to a 1.5" TC fitting. This allows it to attach directly to the sanitary TC fitting on the conical. It also allows for an optional digital temp sensor to be attached. The probe is completely sealed from the outside. Pro Tip:The thermowell can be packed with thermal grease to help temperature response times. Specs:  1.5" TC 304SS 4” long 0.250" ID

Read more less

A standard clamp for all of Spike Brewing's 4" TC ports Specifications: 4" TC 304SS

Read more less

The Spike Brewing engineers have totally redesigned the 1.5" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tightened in a criss-cross pattern to get even pressure to avoid leaks. Their new design is made up of only 5 parts compared to 26 parts in a standard sight glass. No tools are required to assemble or disassemble; simply twist the knurled end cap off. The glass is also protected by the stainless guard which protects the glass from even the clumsiest brewer.  The sight glass allows for direct attachment to the bottom port of our conicals. The sight glass allows for monitoring flow, color and clarity. A sight glass is also helpful when collecting yeast. Specifications: 1.5" TC 304 stainless steel Extra thick Pyrex glass 5” long 25% lighter than previous design   **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**

Read more less

CF15 SPIKE CONICAL UNITANK Spike Brewing has completely re-designed their stainless conical line from the ground up. It took a year in the making and are confident that these are the best conical fermenters on the market! Along with the new TC100 Temp Control System, you'll have everything you need to Elevate Your Brew Day! CF15 Features: 304 stainless steel; 1.2mm (18ga) All sanitary welded ports (no-weldless fittings) All hardware shown here is included! Designed for 5 gallon to 1/2 bbl batches 18 gallon total capacity 15 psi working pressure (always use a 15 psi pressure relief valve) Use for pressure transfers Use as a brite tank Etched volume markings 17" wide by 39¨ tall Fully polished finish Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Three 1.5" TC ports which allow for:  Blow Off Port – Dedicated port for an airlock or blow off tube Hop Port – Dedicated port for adding hops PRV Port – Dedicated port for your pressure relief valve (PRV) Stainless band clamp for attaching the lid Completely removable lid for easy cleaning Body Features: Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps) 1.5" TC racking port with butterfly valve 1.5" TC sample valve (for taking gravity readings) 1.5" TC thermowell with 3" dial thermometer  Limited availability in store.  Drop ships from vendor.

Read more less

Spike Brewing conicals come equipped with this 100% sanitary sample valve. Taking samples has never been so easy; simply twist the valve handle to slowly draw out a sample from your fermenter for a gravity reading. The one downside is you might end up with lower final volumes due to how easy it is to take taste tests ;)Specifications:  1.5" TC 304SS FDA Silicone seals 3/8” barb

Read more less

Spike Brewing's TC-100 temp control system will manage both cooling and heating of your FLEX. The digital controller's temp probe inserts into the included thermowell that attaches to the secondary port of the FLEX. Also included is a specially fitted neoprene jacket which features reinforced port holes to reduce the chance of ripping during install. Lastly, (and maybe the coolest item) is Spike Brewing's special insulated tubing. This greatly reduces tube cooling losses and will prevent your cooling lines from sweating all over your floor during the dog days of Summer! Cooling:When the temp in the FLEX rises above the set point of the controller, it will turn on the pump submerged in your cold water reservoir (bucket of ice water, aquarium, glycol chiller, DIY AC chiller, etc). This will pump cold water/glycol through the temp control coil, which mounts to the lid, cooling your beer until it reaches the controller set point. Heating:When the temp in the FLEX falls below the controller set point the optional heater will kick on warming the unit up to the desired temp. Detailed product guide:Product Guide.pdf TC-100 Package:-Digital temp controller (manages heating and cooling)-Insulated tubing-Temp control coil-Thermowell-Neoprene Insulated Jacket-Submersible pump-Temp Coil Quick Connect Fittings TC-100 + Heat Package:-TC-100 Package (above)-Optional heater (for us northern brewers)  Limited availability in store.  Drop ships from vendor.

Read more less

When pressurizing your Spike Conical you'll always want to use a pressure relief valve (PRV). This will prevent the tank from being over pressurized and causing a potential failure to occur. This Spike Brewing PRV was developed with their OEM specifically to work with their CF series Conical. It will keep your tank below the 15psi max working pressure rating. The PRV also has a handy bleeder pull ring to release built up pressure. Specifications: 15 psi release 1/4" npt threads Spike Brewing's specially designed gas manifold is also now available.  

Read more less

Spike Brewing conicals come equipped with this 100% sanitary 2” TC butterfly valve. This valve has a squeeze locking/trigger handle that allows for 180 degrees of motion and 13 locking positions.The butterfly valve is the preferred valve for the cold side of brewing instead of ball valves. These butterfly valves have no pockets or crevices for bacteria to hide in. Ball valves can trap liquid between the seals in the internal ball when opening and closing the valve.The handle is a special 'shorty' style which keeps a compact design. This handle is made from extremely durable glass reinforced Nylon which is much lighter than metal handles. Specifications: 2" TC  304SS metal components FDA silicone seals Light and very durable Nylon handle Squeeze trigger with 13 locking positions

Read more less

Another cool product the Spike Brewing engineers and in-house welders developed is their USA made racking arm. This racking arm provides 6" of total travel allowing you to draw clear wort even with the hoppiest of beers.The racking arm also incorporates a position indicator that is welded on so the orientation of the racking arm can easily be seen from the outside of the sealed conical (especially useful in closed pressure transfers). Specifications: 1.5" TC 304SS Position indicator  Works with every size conical Made in the USA **A 1.5" gasket and clamp will need to be purchased separately if you do not already have spares**  

Read more less

The Spike Brewing custom Spike extended bracing shelf is a recommended addition when casters or leg extensions are installed. The extended bracing shelf widens the stance of the FLEX making it more stable. This helps when going vertical with the leg extensions or mobile with casters.  Specifications: 304SS Super thick 14ga material Made in the USA Bracing shelf install and instructions:Install + instructions

Read more less

Introducing another cool accessory to compliment Spike Brewing CF series conicals. Their closed pressure transfer kit (CPT kit) will allow you to rack your beer from your conical to keg without exposing it to oxygen. This will help you avoid off-flavors that can be caused by oxygen coming in contact with your beer.  The Spike Brewing CPT kit uses all stainless hardware and Ultra Barrier tubing which is antibacterial due to its silver lining. It is also BPA free and over-sized to promote a quick transfer from conical to keg. CPT Kit Includes: 1.5" TC to flare 1.5" TC clamp 1.5" TC gasket Flare to liquid ball lock Gas ball lock blow off The Spike Brewing gas manifold bundle can be seen HERE.**Always use a 15psi pressure relief valve when pressurizing a tank****

Read more less

Spike Brewing's insulated conical jacket uses high quality, extra thick, yet flexible neoprene material to insulate your conical from the worst ambient conditions be it a hot garage or cold basement. Each custom designed, hand stitched (in the USA) jacket is custom tailored to fit each size of Spike Brewing's conical line. Their jacket was designed by a former Lululemon designer because if you're going to cover up shiny stainless steel it better look amazing. We think she did the trick!   Specifications: Sewn in the USA (of imported fabric from Japan and China) Reinforced stitching around all ports, legs and handles for extra strength Helps maintain stable fermentation temps regardless of ambient conditions Stops the tank from ‘sweating’ in warm weather Interior Velcro for attaching the optional heater Machine washable   Detailed TC-100 product guide:Product Guide.pdf    Limited availability in store.  Drop ships from vendor.

Read more less