Search results for "bottling spigot"

Flush and fill your bottles with ease. The valve has three positions: off, beer, and gas. Insert filler into the bottle in the off position, switch to gas to flush the bottle with CO2, and then switch to beer to fill your bottle. You can control the speed of your flow with the adjustable pressure relief. This filler is designed for use with 12 oz. bottles but can be used with larger formats by attaching a small piece of 1/4" tubing to the filler.

Read more less

The BlowTie 2 Spunding Valve complete kit is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. The blow off pressure can be easily set using the BlowTie's integrated pressure gauge. The kit includes everything you'll need to use the spunding valve right out of the bag. The BlowTie 2 can also be upgraded with a Digital Mini Pressure Gauge. Kit Includes: BlowTie 2 w/ Integrated Pressure Gauge (0-15 psi) Kegland Red Gas Ball Lock Disconnect 8 mm OD Rigid Plastic Joiner

Read more less

This drain tube attaches to the pressure relief valve on the Tapcooler Counter Pressure Bottle Filler to drain away excess beer! Having issues with foam and beer leaking from the Tapcooler Counter Pressure Bottle Filler? This pressure relief drain tube hooks directly up to the pressure relief valve of the Tapcooler to drain away excess beer and foam! Measuring 1 meter long (roughly 40 inches), the end of the tube can be placed in a growler or other receptacle so you can keep filling bottles without spillage!

Read more less

These Spike Brewing Spike+ false bottom is for use with their Spike+ line which uses TC fittings. For the standard Spike kettle line that uses NPT fittings please see HERE. Design Features: All stainless design; no Silicone gasket to make a seal Low profile design; extremely low dead space (<.25gal)  Best filtering on the market due to dual stage filter design; 99.9% grain filtering efficiency TC Pickup tube, gasket and clamp are included False bottom and pick up tube are Made in the USA! 2 Stage Filtering: Stage 1: Filters through top plate's optimally engineered sized laser cut slits Stage 2: Bottom ring supports the grain weight while also filtering the wort again before it reaches the pickup tube **False bottoms are not designed to filter pellet hops in the boil kettle. Instead you'll want to create a whirlpool to center the hop material and then drain using a side pickup (HERE)**

Read more less

An oxygenation kit specifically designed for homebrewing. Oxygenate your wort easily and conveniently with a precise amount of oxygen rather than leaving it to chance.  The Spike Oxygenation (O2) Kit was designed to provide homebrewers with a simple solution for oxygenating their wort prior to fermentation; Happy yeast = happy beer! The days of slow or failed fermentations are over, and a giant 10lb oxygen tank is no longer the only solution! The O2 kit is designed to attach to a standard hardware store oxygen tank and will precisely oxygenate your wort to make sure fermentation goes smoothly! With that precise flow control, eacg oxygen bottle will oxygenate up to 200 gallons of wort; saving you time and money!

Read more less

Use this kit with your counter pressure bottle filler. This kit includes a gas line tee, gas and beverage quick disconnects, 6' of gas line, flare fittings, and 5' of beer line.

Read more less

This USA made blow off cane is designed to attach to the 1.5" TC on the lid of the Spike Brewing conicals. Options:Standard: For use as a standard blow off into sanitizer 1.5" TC End: Use for a blow off into sanitzer with a barb (HERE) and/or attach the Spike Brewing pressure manifold (HERE). Specifications: 1.5" TC 304SS 15” total drop Works with every size conical Made in the USA

Read more less

Spike Brewing's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with their full port valves which have a 5/8" flow diameter; no flow restriction. Spike Brewing's proprietary fittings uses quick connect technology. The quick connect fitting simply hand screws into the kettle and the pickup tube easily pushes in/pulls out; no tools needed. Recommend Uses: Boil Kettle - Create a whirlpool inside your kettle so hop material collects in the center of the lower stepped section. The side pickup will drain clear wort from the side, above the stepped bottom, avoiding the hop and trub material which has settled.  Custom Kettles - Works as a top re-circulation arm or a whirlpool arm. Features: One size fits all kettles  Large 5/8" diameter 304 stainless tube Simply push in for seal; no tools required Proprietary stainless push to connect fitting included Rests on top step for clear wort draining Made in the USA

Read more less

1/2” outside diameter racking tube fits a standard 7/16" hose. Includes a 23" racking tube. Maximum Temperature: 140 °F (60 °C) Starts siphon with a single stroke. Made out of Acrylic. BPA Free. Include the Anti-Sediment Tip. To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet. This product is not resistant to high levels of alcohol. Do not sanitize with alcohol. Acrylic is safe for long exposure to ABV (alcohol by volume) up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into the liquid. If you need to exceed these limits, please use a different product. FAQ Q. My Easy Siphon draws air while transferring?A. If air is coming from the bottom (O-Ring) you can do the following: Check your Anti-Sediment Tip, in case there is some sediment there. Reduce the siphoning height to 20 to 28" above your transferring level. Give the inner tube a twist with your hand. Make sure that the Center Tube with Seal is below the wine/beer level. Does not include 7/16" ID tubing.

Read more less

Spike Brewing's special 5/8" pickup tube flows up to 4x better than their competitors 1/2" size. These 5/8" tubes work perfectly with their full port valves which have a 5/8" flow diameter; no flow restriction. Spike Brewing's proprietary fittings uses quick connect technology. The quick connect fitting simply hand screws into the kettle and the pickup tube easily pushes in/pulls out; no tools needed. Features: One size fits all kettles  Large 5/8" diameter 304 stainless tube  Simply push in for seal; no tools required Proprietary stainless push to connect fitting included Sized to pick up from the bottom edge of the kettle Made in the USA

Read more less

Spike Brewing conicals come equipped with this 100% sanitary sample valve. Taking samples has never been so easy; simply twist the valve handle to slowly draw out a sample from your fermenter for a gravity reading. The one downside is you might end up with lower final volumes due to how easy it is to take taste tests ;)Specifications:  1.5" TC 304SS FDA Silicone seals 3/8” barb

Read more less

A great fermenter option for kombucha brewing.  This 2.1 gallon (8L) glass beverage dispenser comes with an infusion chamber insert and stainless steel spigot.  This dispenser is also provides a great way to dispense lemon water, sun tea, or pre-mixed cocktails. Glass beverage dispenser Removable infusion chamber Stainless steel spigot *DO NOT PUT HOT LIQUIDS INTO THIS GLASS JAR*  

Read more less

750ml Flint (clear) Burgundy Wine Bottles without punt. Case of 12 bottles

Read more less

Made from 304 stainless steel, the hop tube is ideal for adding larger amounts of hop pellets, flowers or spices to your large mouth fermenter, boil kettle, or corny keg. The fine mesh will prevent large particles from blocking beverage out dip tubes, pumps, or chillers. It will hold approximately 5 oz of hop pellets, allowing for some space to permit full extraction of the hop oils. It is ideal for dry hopping in the keg and can also be used for fruits, wood chips, spices and more.

Read more less

Tasteless, odorless, and food grade approved from -100F to 500F. This tubing is rated to 20 PSI and will burst at 30 PSI at 70F. It is not recommended for use with an impeller pump or household water pressure. 1/2" ID 7/8" OD 30 PSI Burst at 70F Platinum Cured  

Read more less

Made of the following materials: Spring made of Steel Plastic parts made of Nylon Steel rivets Smooth operation, self lubricating materials. Small in size, perfect for tight spaces. Has a magnetic cap holder so you can pre-load the unit. Light weight makes operating it a breeze. Works on almost all beer bottles.   NOTE: This product comes packaged in a plastic bag- it is our hope that you re-use this bag to repackage the product after each use to protect it from dust. It is NOT our intention that they are a single-use bag.

Read more less

Bellissima Bottles are perfect for when you only need a smaller amount of wine, mead, olive oil, etc. Punted. These bottles accept the #8 and #9 size corks. 12 bottles per case.

Read more less

28mm black phenolic cap with silicone cone insert.

Read more less

The most common wine bottle around. The Bordeaux bottle (or Claret bottle) hails from the Bordeaux region in France, as the name implies. Known for its broad shoulders and straight figure, this type of bottle comes in a range of shades and can hold a variety of wine types. Dark green and brown are usual picks for reds, to guard them against light during prolonged keeping, while light green and flint are typically reserved for whites that will be drank sooner after bottling. Claret shaped bottles are commonly used for Cabernet Sauvignon, Merlot, Sauvignon Blanc, Zinfandel, Bordeaux, Chianti, Barolo, Rioja, and Malbec. 750ml flint (clear) bottles without a punt.

Read more less

Fits on 5 oz. and 10 oz. woozy bottles. 24-414 thread

Read more less

Set of three, mini stainless steel funnels wth handle.  The narrow stems make these great to fill slim necked bottles, jars, and small containers easily.   Mouth sizes: 1.5", 2", and 2.75 Stem sizes: 1/16", 1/8", and 1/2"  

Read more less

These standard-sized 26.5 mm pry-off crown caps have an attractive red color and a special, oxygen absorbing lining to limit oxidation. Bag of 144 caps

Read more less

These standard-sized 26.5 mm pry-off crown caps have an attractive brushed silver color and a special, oxygen absorbing lining to limit oxidation. Bag of 144 caps

Read more less