Testing & Measuring

This basic, economical hydrometer reads in three scales (Triple Scale) - Specific Gravity, Brix/Balling, and Potential Alcohol, making it a must-have tool for any home brewer or wine maker.

Read more less

Testing Jar 12" High with Screw Off Base This revolutionary Screw-off base testing jar, allows you to thoroughly clean the base, and the acrylic tube. Just screw-off base for cleaning and screw on again. BPA Free Maximum Temperature: 75 °C (167 °F). Tube Diameter: 1.25 inch, 3.2 cm Base Diameter: 3 inches, 8 cm NOTE:  Use the least amount of force to tighten the tube so you achieve a good seal. If you overtighten the base may become unstable and wear faster the liner that provides a good seal (worst case, you may break the tube).

Read more less

This one-piece moulded hydrometer jar is made with alcohol resistant plastic. It can be used for everything, wine, beer, and liquids with high levels of alcohol. Made out of food grade materials. BPA Free. Stable base and wide cylinder for accurate measurements. This Testing Jar could replace glass hydrometer jars. Its wide base makes it more stable. No worries about the hydrometer sticking to the walls. The tube is wider allowing more accurate readings. Easy to clean with a beer brush. Since there is no glue (it is a one-piece testing jar), there will be no leaks at all. Maximum Temperature: 75 °C (167 °F). Available in: 10” High - 200 ml (7 oz.), 1.57" Tube Diameter, 3.2" Base Diameter 14” High - 320 ml (10 oz.), 1.6" Tube Diameter, 3.5" Base Diameter

Read more less

This economy proof and tralles hydrometer is used to find the alcohol percentage of alcohol by volume (abv) in a completely dry or distilled liquor. It does this by measuring the density of the liquid compared to that of alcohol; any residual sugar or other cause of change to the density will result in a false low reading. Hydrometer for testing alcohol levels in distilled spirits. Will only work in solutions of ethanol and water, will not read the alcohol levels of beer or wine.Reads alcohol percentage on scale of 0-100%, and Tralles scale (Proof) on a scale of 0-200.

Read more less

Adhesive LCD thermometer with a range of 39F to 97F.

Read more less

"Student Grade" Erlenmeyer flasks.  Great for testing or making yeast starters. Available in 125 ml, 500 ml, 1000 ml, 2000 ml, 3000 ml and 5000 ml sizes.

Read more less

PH test strips with a range of 2.8-4.4 PH for wine, kombucha, and fermented foods. Vial of 100 ph papers.

Read more less

This deluxe hydrometer for beer or wine that is exactly like the triple scale hydrometer but has a built-in thermometer that allows you to instantly correct your hydrometer readings for temperature. A hydrometer reads accurately at 60 Fahrenheit. Temperatures above and below 60F require that you add or subtract from your reading. Like the basic model, the deluxe hydrometer also features three scales - specific gravity, potential alcohol and brix.

Read more less

A complete acid test kit, which includes: Standard Sodium Hydroxide Solution .1N Acid Indicator Solution (Phenolphthalein) Calibrated Syringe Test Tube Full Instructions Contains Hazardous Materials -- KEEP OUT OF REACH OF CHILDREN The formula used to calculate TA (titratable acidity) as g/L of tartaric acid is as follows: Titratable acidity (g/L tartaric acid) = (Vtitrant * Ntitrant *75)/ Vsample Where, Vtitrant: Volume of titrant in mLVsample: Volume of sample in mLNtitrant: Titrant concentration in normality75: Value based on various conversion factors (i.e. molecular weight, reaction ratio, etc.) Ships via ground transportation only.

Read more less

13 inch high glass hydrometer test jar. Comes with protective bumper guard and plastic base.

Read more less

Use this sampler (baster) to pull samples of your beer, wine, or cider.  A simple tool to transfer product to your hydrometer jar. Made from FDA-approved silicone and plastic; heat-resistant to 210-degrees Fahrenheit; 1.5-fluid-ounce capacity Easy to use; disassembles for a thorough cleaning; top-rack dishwasher safe for easy cleanup

Read more less

This unique Stainless Steel Sampler comes assembled.Overall Length: 18-1/4"Draws: Over 2.0 oz.This product is appropriate for handling high levels of alcohol.Cleaning Tips for Stainless Steel products:-Don't use chlorine or any sanitizing solution that contains chlorine.-Don't forget to rinse, residue from cleaning solutions can stain or damage the finish.-Towel dry the product after rinsing.-Gritty or hard water can stain the product.

Read more less

Class A graduated glass cylinder. Available in 10ml, 50ml, 100ml sizes.

Read more less

Borosilicate glass beakers. Measurements are approximate +/-5% Sizes 100ml, 250ml, 400ml, and 1000ml

Read more less

This beer thermometer is a perfect tool for any home brewer. Made of glass, and features a temperature range scale of 0-220 F. A reliable, easy-to-use homebrew thermometer is an essential tool that will help you calibrate all the rest of your equipment and ensure optimal results for the end product of your balanced brewing. Temp. scale of 0-220 F. 12" in length (305 mm).

Read more less

A simple pen-style thermometer that displays °F or °C.  Good for measuring the temperature of liquid, food, and BBQ. Specifications: Temperature Range: -58°F ~ +572°F (-50°C ~ +300°C) Resolution: 0.1°C/F Battery Included: 1 x 1.5V (LR44) Probe made of stainless steel Overall dimensions (L x W): 9.6" x 0.9" (245mm x 25mm) 0.15" (4mm) Ø Probe Auto power off after 15 minutes  

Read more less

Refractometers are excellent tools to determine the density of unfermented wort or must, providing quick and accurate readings with only a few drops of sample fluid. This handheld version is packed with features to make it perfect for both brewers and winemakers. The refractometer reports measurements in both °Brix and Specific Gravity, and automatically compensates for temperature. The display has an adjustable focus lens, so there is no need to try and look through the eyepiece while wearing glasses. It is made of durable, lightweight materials, and comes with a protective, hard-shell case, a drop applicator, and a screwdriver in case manual calibration is desired.

Read more less

This easy test sampler works as a thief and hydrometer jar all in one! Draw, test and replace in one handy instrument.

Read more less

The Milwaukee pH55 pH meter is a pocket-sized, waterproof pH & Temperature meter. It features a digital display, automatic calibration, and automatic temperature correction. The pH55 also has an auto-off function to save battery life, and a hold button that freezes the display for easy recording. The electrode is replaceable. Range: -2.0 to 16.0 pH,  -5.0 to 60.0 °C Resolution: 0.1 pH, 0.1 °C Accuracy: (@25 °C) ±0.1 pH, ±0.5 °C Temperature Correction: Automatic (-5 to 60 °C) Battery Type: 4× 1.5V; IEC LR44, A76 (included) Battery Life: approx. 300 h. Dimensions: 200 mm long × 38 mm diameter  

Read more less

3ml pipette used for transferring fluids to sample tubes one drop at a time.  Also useful when using a refractometer. Use in classrooms and research labs. Non-sterile. Squeezable and flexible LDPE plastic. Disposable to prevent cross-contamination. Graduated for accurate measurement.

Read more less

150 ml glass beaker.

Read more less

Economy glass wine thief1 " Diameter x 12 " Long

Read more less

PH test strips with a beer range of 4.6-6.2 PH. Vial of 100 ph papers.

Read more less

A glass baster with silicone rubber bulb which works great for pulling samples of your beer, wine, and ciders. Measures: 10.5" x 2.25" x 2" Capacity: 2 oz.

Read more less

Sodium Hydroxide 4 fl oz (Certified 0.1 normal). Replacement sodium hydroxide for BSG branded acid test kit.

Read more less

The Kegland portable pen style pH meter is an excellent value, considering all of the features it comes with.  It is very accurate with a resolution of 0.01 pH.  It is entirely waterproof, made of high quality components and includes automatic temperature compensation (ATC).  The probe is designed to be easily and affordably replaced when needed.  The cap seals perfectly over the probe to prevent it from drying out and decreasing its lifespan.   This unit is very easy to calibrate.  You insert the probe into the pH calibration solution closest to the pH of the sample you want to test and push the CAL button, it detects which solution value it is, and then auto calibrates in less than 5 seconds.  The Beverage Doctor features 3-point calibration, allowing the pen to be calibrated at three different standard levels - 4.00, 6.86 or 9.18. These standards are included with the pH meter. Features: Water resistant 0-14 pH with .01 pH accuracy Simultaneous temperature measurement 3 point calibration (4.00/6.86/9.18pH) Automatic temperature control Replaceable probe/sensor Sponge embedded clear cap

Read more less

The Brewmaster Mini Digital Scale is the perfect size for measuring out hops and specialty grains, or really anything under 4.5 lbs. The scale features a backlit display that's always easy to read and an automatic shutdown after 60 seconds to preserve battery life. Most scales in this size range max out at 1000 g or 2.2 lbs, but the Brewmaster scale has an extended range that goes up to 2000 g or 4.4 lbs. The scale includes two measuring trays that are perfect for measuring hops or small amounts of grain. For measuring brewing salts, additives, or precise amounts of hops, we highly recommend the Brewmaster High Precision Scale. Features: 2 kg (4.4 lb) Capacity 0.1 g Resolution Auto Calibration Tare Function Back Light Display 60 Seconds Auto Shutdown Units: g/oz/ozt/dwt/gn/ct (2) Measuring trays included Batteries included

Read more less

The steel shot and wax at the bottom of this glass thermometer allows it to float in solutions. This thermometer should not be used to stir the wort, nor should it be used to gauge the temperature of already boiling liquid. Temperature Range: 0-220 F (-10 To 95.5 C). Length: 9" (23Cm).This product uses alcohol, not Mercury, to measure temperature. It does not contain any toxic materials.

Read more less

Small Alcometer for use in the Still Spirits Copper Parrot (Large | Small) Length: 8.27" Width: 1.18" Height: 1.18"

Read more less

5" glass, with instructions for testing alcohol in finished wines. Boxed Higher quality vinometer, precise to .5% alcohol w/ triangular capillary tube. Complete with read- out panel backing for clearer reading. Boxed instructions. 

Read more less

For the highest level of accuracy, you need the Brewmaster Precision Digital Scale. Most scales only measure down to 1/10th of a gram or 0.1 while this unit measures to the 1/100th of a gram or 0.01. This is the ideal scale for measuring brewing salts when you want your water profile to be as on point as possible. Also works well for hops, additives, or other measurements under 1 lb. If you're not concerned about having this level or precision, or want a scale that also works well with measuring specialty grains, check out the Brewmaster Mini Digital Scale. Features: 500 g (1.1 lb) Capacity 0.01 g Resolution Auto Calibration Tare Function Back Light Display 30 Seconds Auto Shutdown Units: g/oz/ozt/dwt/gn/ct Batteries included   Note: This scale dose not come with calibration wieghts.

Read more less

10 ml/cc syringe generally used in acid test kits.

Read more less

Used to determine the Total Acidity in a wine, the CellarScience Acid Test Kit is an invaluable tool for any home winemaker. Total Acidity measurements are important to winemaking because the correct amount of acidity is key to maintaining a wine which is balanced in flavor and stable for ageing.Kit Contents: Large Reaction Vial 10mL Syringe 4oz of Sodium Hydroxide Reagent Phenolphthalein Indicator in 1oz Dropper Jar Reagent Stability Information: Sodium Hydroxide Solution - 0.1 Normal (2 year shelf life cool & closed, 3 month shelf life cool and opened) Phenolphthalein Indicator - 1.0% (5 year + Shelf life) Ships via ground transportation only.

Read more less

Storage solution is used to keep your pH meter probe from drying out when not in use.  Make sure to always fill the cap with storage solution before storing your pH meter. Electrolyte Solution KCI 3mol/Litre  

Read more less

Designed for home brewing, the Tilt hydrometer lets you instantly read your brew's specific gravity and temperature on your compatible Apple iPhone/iPad or Android smartphone/tablet or Tilt Pi. Most Bluetooth 4.0+ devices will work with the Tilt. You can then optionally log data to the cloud using our free Google Sheets template or other 3rd party cloud platforms. See our Apps section for more detail. Our goal is to help home brewers brew better beer. The Tilt hydrometer allows you to check the specific gravity and temperature of your beer while it's fermenting, without ever having to open your fermenter or pour out any of your precious brew. This makes brewing more consistent and easy to track.  Here are some of the new features of the Tilt: Range: Better reception and range. With the increased transmission power your Tilt will send data through larger, thicker-walled fermenters. Precision: Upgraded sensors. With an improved temperature sensor and accelerometer your Tilt will operate with more precision.   Efficiency: We've reduced power consumption so more brews, less battery. New Look: Newly designed custom circuit board and harness. If using multiple Tilt hydrometers for different batches of fermenting beer you must use a different color for each batch. The app will not read multiple hydrometers of the same color. Each Tilt comes calibrated and ready to go with a pre-installed battery that lasts 12-24 months depending on usage. Just download the free app, sanitize your Tilt, drop in your fermenter, and start taking readings with your phone, tablet, or Tilt Pi.  The specific gravity is accurate +/- 0.002 within the Tilt's range of 0.990 to 1.120. The thermometer is accurate +/- 1 degree F (+/- 0.5 degree C). Download the free Tilt app at the Apple App Store or Google Play Store or get the free Tilt Pi download.

Read more less

If you're new to brewing you'll soon learn that healthy yeast makes better beer. The best place to start with making healthy yeast is to build up their numbers. This compact stir plate works with Erlenmeyer flasks up to 5000mL in size. Depending on the volume of your yeast starter, you can use the adjustment knob to dial in the speed of the stir bar. It is recommended using just enough power to keep yeast in suspension, a full vortex isn't really necessary. Note: Pictured flask not included.

Read more less