Fermenters
Replacement Pump for Marchisio Variable Volume Tanks
Pneumatic air pump for variable capacity (VC) tanks. Features a 3/8 in barbed nipple to attach a length of tubing. Can be used with VC tanks from most manufacturers.
$69.99
Stainless Bucket Fermenter with Heating - 65L/17.1G (110V)
This top value fermenter is made from 304 grade stainless steel and has an integrated (concealed) 60-watt heating element. No need to worry about accessories such as heating belts and external temperature controllers. This stainless steel fermenter will keep your yeast at optimal temperature making it the ideal option for cold climates. The welding is smooth and the outer body has a sleek brushed stainless finish making it easy to clean and maintain. The base inside this unit is a dome so it's really easy to clean while the rotating rack arm enables you to drain out every last drop. This unit comes standard with silicone tubing to transfer from the ball valve to your bottles or cans. Specifications: 110V / 60W power Capacity: 65L Brimful Body Material: 304 Stainless steel Outlet Valve Type: Stainless steel, nylon bushings, silicone seal and stainless rotating rack arm. Thread on tap is 1/2" Lid: 304 Stainless steel Display: Digital temperature display Heating: 60 Watt Concealed Element Stopper & airlock included Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Please note: Heating capacity is highly dependent on ambient temperature and use of insulation. The 65L Bucket Buddy is appropriate for warm fermentations such as kveik. Adding insulation may increase heating capacity while colder ambient environments may lower heating capacity. KegLand Part Number: KL23061
$275.00
Hop Bong Sight Glass - 2 in. T.C.
The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. This particular sized tri-clamp Hop Bong was designed for the FermZilla Tri-Conical and All Rounder fermenters with the new Tri-Clamp Adapted Pressure Lid. It can also be adapted to any 2" T.C. port in your system to use either inline or as a dry hopping device. The side port features PCO1881 male threads so you have the option to add a Ball Lock Cap. When used as a dry hopping device on top of your fermenter, this will allow you to purge your additions of oxygen by flushing them with CO2. When used as a sight glass below your fermenter, bubble CO2 from the bottom up via the Ball Lock Cap to rouse hops or carbonate finished beer. Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic. Hop Pellet Capacity: 150–180g (5.2–6.3 oz)
$27.50
Hop Bong Sight Glass - 1.5 in. T.C.
The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. This particular sized tri-clamp Hop Bong was designed for the BrewBuilt X-Series Uni Conical fermenters for their 1.5" T.C. lid port. The side port features PCO1881 male threads so you have the option to add a Ball Lock Cap. When used as a dry hopping device on top of your fermenter, this will allow you to purge your additions of oxygen by flushing them with CO2. When used as a sight glass below your fermenter (if your conical has a 1.5" bottom port, or if you use it along with a 2" x 1.5" reducer), bubble CO2 from the bottom up via the Ball Lock Cap to rouse hops or carbonate finished beer. Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic. Hop Pellet Capacity: 80–120g (2.8–4.2 oz)
$22.00
200L (53G) Variable Capacity Tank - Flat Bottom
Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha. Includes: 304 Stainless Tank 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dry Airlock for tank Chrome Plated Spigot 200L Specifications: Nominal volume: 200 Liters (52.8 gallons) Effective volume: 200 Liters (52.8 gallons) Diameter: 50 cm (20 inches) Height: 120 cm (47 inches) Valve size: 1/2" BSP Thickness (Bottom X side, in mm): 1.0 X 0.7 *Please Note: Tank may differ slightly from image shown. Stands are sold separately. Due to size of this item, it is available for pick-up only.
$599.99
100 L (26G) Variable Capacity Tank - Flat Bottom
Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha. Includes: 304 Stainless Tank 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dry Airlock for tank Chrome Plated Spigot 100L Specifications: Nominal volume: 100 Liters (26.4 gallons) Effective volume: 93 Liters (24.6 gallons) Diameter: 50 cm (20 inches) Height: 60 cm (24 inches) Valve size: 1/2" BSP Thickness (Bottom X side, in mm): 1.0 X 0.7 *Please Note: Tank may differ slightly from image shown. Stands are sold separately. Due to size of this item, it is available for pick-up only.
$499.99
Wine Fermenter Dolly
This dolly fits the 20 gallon and larger trash can style wine fermenters. This dolly is made from tough plastic and features five sturdy casters. It locks onto the bottom of the wine fermenters allowing for easy transport.
$59.99
Speidel Storage Lid Gasket
Replacement lid gasket for 60L-500L Speidel rectangular storage tanks.
$4.00
Leveling Feet
Want some additional leveling adjustment for your FLEX? Well the Spike Brewing non-marking leveling feet will do the trick! They also use a 304SS stud because nobody likes rust! Specifications: Non marking plastic bottom 304SS stud 3 pack
$16.00
FLEX Replacement Lid Gasket
The Spike Brewing conical lid gasket is a one piece design made from FDA approved Silicone. This design allows for an easy install and easy clean up. Simply push the gasket into the gasket groove on the lid. Specifications: Black in color FDA approved Silicone Works with the FLEX and FLEX+
$12.00
FLEX Extended Bracing Shelf
The Spike Brewing custom Spike extended bracing shelf is a recommended addition when casters or leg extensions are installed. The extended bracing shelf widens the stance of the FLEX making it more stable. This helps when going vertical with the leg extensions or mobile with casters. Specifications: 304SS Super thick 14ga material Made in the USA Bracing shelf install and instructions:Install + instructions
$55.00
Chronical Replacement O-rings
Four replacement o-rings for Ss Brewing Technologies Chronical racking arm bought after September 2014.
$2.99
Blow Off Cane, 3'' TC for 14 gallon Chronical
Blow off cane for 14 gallon Chronical. Made from 304 stainless steel this blow off cane is for 3" tri-clamp lids and includes a pressure relief valve. A 3" tri-clamp gasket is NOT included.
$56.95
3/8'' Stainless Steel Tap
3/8" mpt stainless steel spigot with black handle.
$19.99 $14.99
3/8'' All Stainless Steel Tap for Oil Drums
3/8" mpt stainless steel spigot for olive oil drum.
$24.99 $18.99
FLEX Leg Extension Set
Leg extensions are a great option to get th FLEX off the ground. This reduces bending over to take gravity readings, add hops, transfer, etc. The shorty leg extensions are 9” long and the long leg extensions are 18". Both screw directly into the bottom of the FLEX legs. Both sets of leg extensions can be used with the stock leg caps, leveling feet and casters. *It is recommend to use the extended bracing shelf when using the leg extensions for added stability* Shortly leg extension specifications: 304SS 9" long Top threads for attaching to conical legs Bottom threads for attaching leveling feet and casters Long leg extension specifications: 304SS 18" long Top threads for attaching to conical legs Bottom threads for attaching leveling feet and casters
$42.00 - $55.00
Conical Replacement Lid Gasket
The Spike Brewing conical lid gasket is a one piece design made from FDA approved Silicone. This design allows for an easy install and easy clean up. Simply push the gasket into the gasket groove on the lid. Specifications: Black in color FDA approved Silicone
$13.00 - $40.00
CF30 Spike Conical Unitank
CF30 SPIKE CONICAL UNITANK Spike Brewing has completely re-designed their stainless conical line from the ground up. It took a year in the making and are confident that these are the best conical fermenters on the market! Along with the new TC100 Temp Control System, you'll have everything you need to Elevate Your Brew Day! CF30 Features: 304 stainless steel; 1.5mm (16ga) All sanitary welded ports (no-weldless fittings) All hardware shown here is included! Designed for 1/2 bbl to 1 bbl batches 40 gallon total capacity 15 psi working pressure (always use a 15 psi pressure relief valve) Use for pressure transfers Use as a brite tank Etched volume markings 24" wide by 46¨ tall Fully polished finish Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Three 1.5" TC ports which allow for: Blow Off Port – Dedicated port for an airlock or blow off tube Hop Port – Dedicated port for adding hops PRV Port – Dedicated port for your pressure relief valve (PRV) Stainless band clamp for attaching the lid Completely removable lid for easy cleaning Body Features: Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps) 1.5" TC racking port with butterfly valve 1.5" TC sample valve (for taking gravity readings) 1.5" TC thermowell with 3" dial thermometer Bracing shelf is included with the CF30 Limited availability in store. Drop ships from vendor.
$1,897.50
