Fermenters

Replacement Lid O-Ring for FermZilla for all models and sizes of FermZilla fermenters.

Read more less

Replacement Lid Gasket for Speidel Plastic Fermenters 20L (5.3 gal) & 30L (7.9 gal)

Read more less

CF10 SPIKE CONICAL UNITANK Spike Brewing has completely re-designed their stainless conical line from the ground up. It took a year in the making and are confident that these are the best conical fermenters on the market! Along with the new TC100 Temp Control System, you'll have everything you need to Elevate Your Brew Day! CF10 Features: 304 stainless steel; 1.2mm (18ga) All sanitary welded ports (no-weldless fittings) All hardware shown here is included! Designed for 5 to 10 gallon batches 14 gallon total capacity 15 psi working pressure (always use a 15 psi pressure relief valve) Use for pressure transfers Use as a brite tank Etched volume markings 17" wide by 35¨ tall Fully polished finish Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Three 1.5" TC ports which allow for:  Blow Off Port – Dedicated port for an airlock or blow off tube Hop Port – Dedicated port for adding hops PRV Port – Dedicated port for your pressure relief valve (PRV) Stainless band clamp for attaching the lid Completely removable lid for easy cleaning Body Features: Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps) 1.5" TC racking port with butterfly valve 1.5" TC sample valve (for taking gravity readings) 1.5" TC thermowell with 3" dial thermometer  Limited availability in store.  Drop ships from vendor.

Read more less

CF5 SPIKE CONICAL UNITANK Spike Brewing has completely re-designed their stainless conical line from the ground up. It took a year in the making and are confident that these are the best conical fermenters on the market! Along with the new TC100 Temp Control System, you'll have everything you need to Elevate Your Brew Day! CF5 Features: 304 stainless steel; 1.2mm (18ga) All sanitary welded ports (no-weldless fittings) All hardware shown here is included! Designed for 2.5 to 6 gallon batches 7 gallon total capacity 15 psi working pressure (always use a 15 psi pressure relief valve) Use for pressure transfers Use as a brite tank Etched volume markings 14" wide by 29¨ tall Fully polished finish Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Three 1.5" TC ports which allow for:  Blow Off Port – Dedicated port for an airlock or blow off tubeHop Port – Dedicated port for adding hopsPRV Port – Dedicated port for your pressure relief valve (PRV) Stainless band clamp for attaching the lid Completely removable lid for easy cleaning Body Features: Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps) 1.5" TC racking port with butterfly valve 1.5" TC sample valve (for taking gravity readings) 1.5" TC thermowell with 3" dial thermometer  Limited availability in store.  Drop ships from vendor.

Read more less

Upgrade your FermZilla Conical or All Rounder with the new 2" Tri-Clamp Lid from KegLand. Add yeast, hops or even take samples from a wine thief from the top and not have to remove the entire lid. This particular lid was designed in order to suit a growing number of customers desire to dry hop without exposing the batch to oxygen from opening the lid. By using this lid in conjunction with the FermZilla 2" Butterfly Valve and Hop Bong Kit, you will be able to purge CO2 into the tube and expel all the oxygen inside it and dump freely into the vessel. Features: (2) PCO1881 Male Ports Recommended for use with Red (Gas In) & Yellow (Bev Out) Ball Lock Caps PRV Port with Red 35 psi (2.5 BAR) PRV 2" T.C. Ferrule Undrilled Ports (for optional accessories): Thermowell Port (for FermZilla Thermowell kit) (2) Temp Twister Ports Please Note: Temp Twister will need to be bent on a 20° Angle in order to fit on the curved lid and align vertically in the tank.  Also includes: 2" Tri-Clamp 2" T.C. Gasket 2" T.C. x PCO1881 Male Thread Cap Warning: Always depressurize your system COMPLETELY before removing fittings from your fermenter. Warning: Only use Red 35 psi PRV with this lid. Ensure the PRV is cleaned and dried of sticky residue before each fermentation. Failure to do so could cause injury and void warranty.

Read more less

CF15 SPIKE CONICAL UNITANK Spike Brewing has completely re-designed their stainless conical line from the ground up. It took a year in the making and are confident that these are the best conical fermenters on the market! Along with the new TC100 Temp Control System, you'll have everything you need to Elevate Your Brew Day! CF15 Features: 304 stainless steel; 1.2mm (18ga) All sanitary welded ports (no-weldless fittings) All hardware shown here is included! Designed for 5 gallon to 1/2 bbl batches 18 gallon total capacity 15 psi working pressure (always use a 15 psi pressure relief valve) Use for pressure transfers Use as a brite tank Etched volume markings 17" wide by 39¨ tall Fully polished finish Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Three 1.5" TC ports which allow for:  Blow Off Port – Dedicated port for an airlock or blow off tube Hop Port – Dedicated port for adding hops PRV Port – Dedicated port for your pressure relief valve (PRV) Stainless band clamp for attaching the lid Completely removable lid for easy cleaning Body Features: Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps) 1.5" TC racking port with butterfly valve 1.5" TC sample valve (for taking gravity readings) 1.5" TC thermowell with 3" dial thermometer  Limited availability in store.  Drop ships from vendor.

Read more less

Limited availability in store, drop ships from vendor.   The Grainfather Conical Fermenter Pro gives brewers more flexibility and freedom during fermentation than ever before!   Product Description The Grainfather Conical Fermenter Pro has built-in wireless control, so you can control and monitor fermentation from anywhere!  The Conical Fermenter Pro gives brewers more flexibility and freedom during fermentation than ever before! Connect the built-in wireless controller to the internet and the Grainfather App, add fermentation tracking devices and control/monitor fermentation from anywhere!   The Conical Fermenter Pro allows you to dump yeast, take samples and transfer your wort via our innovative, dual function, valve design. Partner it with the Glycol Chiller*** and get full control over the heating and cooling of your unit. FEATURES: Double Walled: A stainless steel double walled skin is filled with a thick layer of polyurethane foam for insulation. This is what keeps the wort at a constant stable temperature with minimal influence from any external environmental temperature changes, providing insulation for your fermentation that a standard jacket cannot achieve.  Integrated Gentle Heating: In the cavity of the fermenter between the outer body and cone sits a 30 Watt, 12V heating element. Unlike standard heating elements/sources that directly heat the liquid, this heat source is designed to heat the environment in between the walls of the fermenter, which in turn heats the liquid. It is similar to controlling the temperature in a temperature-controlled room. The fermenter acts as an artificial environment that can be heated, meaning the temperature is raised in an even and controlled manner which is much better for the yeast. Integrated Cooling Sleeve: In between the two stainless steel walls sits a cooling sleeve (also made of stainless steel). This cooling sleeve is welded onto the inner wall of the fermenter and can be hooked up to the additionally purchased Glycol Chiller. Temperature is dialed into the Temperature Controller and as the cooling liquid travels through this sleeve, it cools the stainless steel which in turn evenly cools the beer in the fermenter. The cooling sleeve never comes into contact with the beer, it is completely concealed, built into the fermenter, and never needs cleaning or sanitizing - a true innovation for a fermenter of this scale.Easy Access to the Interior for Hassle-Free Cleaning: The Grainfather Conical Fermenter has a smooth interior with no additions such as cooling coils or additional sampling valves meaning it is easy to clean and minimizes the risk of infection. Golden Angle Conical: The conical shape of the fermenter is typical for professional breweries. Our conical has been designed with the 'Golden Angle' of 60º. This is the optimum angle for yeast and sediment to drop down to the bottom of the cone without getting stuck to the sides, allowing you to transfer from above the sediment line, resulting in clearer beer. The conical shape also allows for better mixing during fermentation due to the path of convention currents that it enables to occur. Dual Valve Tap: Make the yeast dumping, transferring and sampling process more professional with this innovative all in one valve. Sampling and transferring is done through an inlet above the sediment line, allowing for clear, sediment-free beer. Easily collect your yeast from below the sediment line with the same unique valve for recultivating and pitching. The innovative design of the valve allows for this dual functionality and less cleaning for you.  Support: The Grainfather Conical Fermenter is fully supported around the world by a fantastic support team who love brewing just as much as you do. Our support team is here for any technical inquiries on brewing or how the Conical Fermenter works, as well as general customer service inquiries. All Grainfather Conical Fermenters come with a 24-month warranty. Includes: Conical Fermenter  Fermenter Lid Rubber Bung Bubbler Airlock Cone Plug Cone Plug Seal 5 cm (2") Tri-Clamp Digital Temperature Display Power Adapter and Wall Plug 2 m (6.5 ft) M12 3-Pin Power Cord Dual Valve Tap Wi-Fi Capable Wireless Temperature Controller Specifications: 304 Stainless Steel Body (polished inner and brushed outer) 30 L (8 US Gal) capacity (volume markings on inner body up to 25 L (7 US Gal) 30 W, 12 V heating power 3.8 cm (1.5") ferrule on lid (for pressure transfer attachments) 5 cm (2") ferrule on bottom of cone Dual Valve Tap with 110 mm (4.3”) inlet Dimensions of Conical Fermenter:  Diameter with handles: 360 mm (14.2") Height (without airlock): 910 mm (35.83") Height with bubbler airlock: 1090 mm (42.92") Dimensions of Carton: 368 mm W x 325 mm L x 905 mm H Limited availability in store, drop ships from vendor.

Read more less

Pneumatic air pump for variable capacity (VC) tanks. Features a 3/8 in barbed nipple to attach a length of tubing. Can be used with VC tanks from most manufacturers.

Read more less

The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. This particular sized tri-clamp Hop Bong was designed for the FermZilla Tri-Conical and All Rounder fermenters with the new Tri-Clamp Adapted Pressure Lid. It can also be adapted to any 2" T.C. port in your system to use either inline or as a dry hopping device. The side port features PCO1881 male threads so you have the option to add a Ball Lock Cap. When used as a dry hopping device on top of your fermenter, this will allow you to purge your additions of oxygen by flushing them with CO2. When used as a sight glass below your fermenter, bubble CO2 from the bottom up via the Ball Lock Cap to rouse hops or carbonate finished beer. Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic. Hop Pellet Capacity: 150–180g (5.2–6.3 oz)

Read more less

This dolly fits the 20 gallon and larger trash can style wine fermenters.  This dolly is made from tough plastic and features five sturdy casters. It locks onto the bottom of the wine fermenters allowing for easy transport.

Read more less

Plastic spigot with 17mm x 2mm threads for wide mouth glass carboys, jugs, and beverage dispensers. Standard left to right turn.

Read more less

Sanitary inner liner for Genesis fermenters.   Package contains one liner.

Read more less

This top value fermenter is made from 304 grade stainless steel and has an integrated (concealed) 60-watt heating element. No need to worry about accessories such as heating belts and external temperature controllers. This stainless steel fermenter will keep your yeast at optimal temperature making it the ideal option for cold climates. The welding is smooth and the outer body has a sleek brushed stainless finish making it easy to clean and maintain. The base inside this unit is a dome so it's really easy to clean while the rotating rack arm enables you to drain out every last drop. This unit comes standard with silicone tubing to transfer from the ball valve to your bottles or cans. Specifications: 110V / 60W power Capacity: 65L Brimful Body Material: 304 Stainless steel Outlet Valve Type: Stainless steel, nylon bushings, silicone seal and stainless rotating rack arm. Thread on tap is 1/2" Lid: 304 Stainless steel Display: Digital temperature display Heating: 60 Watt Concealed Element Stopper & airlock included Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Please note: Heating capacity is highly dependent on ambient temperature and use of insulation. The 65L Bucket Buddy is appropriate for warm fermentations such as kveik. Adding insulation may increase heating capacity while colder ambient environments may lower heating capacity. KegLand Part Number: KL23061

Read more less

The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of not only dry hopping oxygen purged hops into fermenters, but also as an inline carbonation/oxygenation accessory. This particular sized tri-clamp Hop Bong was designed for the BrewBuilt X-Series Uni Conical fermenters for their 1.5" T.C. lid port. The side port features PCO1881 male threads so you have the option to add a Ball Lock Cap. When used as a dry hopping device on top of your fermenter, this will allow you to purge your additions of oxygen by flushing them with CO2. When used as a sight glass below your fermenter (if your conical has a 1.5" bottom port, or if you use it along with a 2" x 1.5" reducer), bubble CO2 from the bottom up via the Ball Lock Cap to rouse hops or carbonate finished beer. Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic. Hop Pellet Capacity: 80–120g (2.8–4.2 oz)

Read more less

Variable Capacity tanks, also called Variable Volume tanks, made in Italy by Marchisio. This style of tank features a ‘floating’ lid with an inflatable gasket that can be positioned at any height in the tank. Use the included air pump to inflate the lid gasket. Whether you position the lid directly on the liquid, just above, or at the top of the tank is up to you. They are used as affordable stainless production tanks for applications ranging from winemaking to pickled foods and Kombucha.  Includes: 304 Stainless Tank 304 Stainless Floating Lid Food-Grade Floating Gasket Air Pump with pressure gauge Connection kit for connecting gasket to pump Dry Airlock for tank Chrome Plated Spigot 100L Specifications: Nominal volume: 100 Liters (26.4 gallons) Effective volume: 93 Liters (24.6 gallons) Diameter: 50 cm (20 inches) Height: 60 cm (24 inches) Valve size: 1/2" BSP Thickness (Bottom X side, in mm): 1.0 X 0.7 *Please Note: Tank may differ slightly from image shown. Stands are sold separately. Due to size of this item, it is available for pick-up only.

Read more less

Replacement lid gasket for 60L-500L Speidel rectangular storage tanks.

Read more less

Replacement lid gasket for SS Brewtech's 7 gallon Chronical and Brew Buckets.

Read more less

Want some additional leveling adjustment for your FLEX? Well the Spike Brewing non-marking leveling feet will do the trick! They also use a 304SS stud because nobody likes rust! Specifications: Non marking plastic bottom 304SS stud 3 pack

Read more less

The Spike Brewing custom Spike extended bracing shelf is a recommended addition when casters or leg extensions are installed. The extended bracing shelf widens the stance of the FLEX making it more stable. This helps when going vertical with the leg extensions or mobile with casters.  Specifications: 304SS Super thick 14ga material Made in the USA Bracing shelf install and instructions:Install + instructions

Read more less

Four replacement o-rings for Ss Brewing Technologies Chronical racking arm bought after September 2014.

Read more less

Blow off cane for 14 gallon Chronical. Made from 304 stainless steel this blow off cane is for 3" tri-clamp lids and includes a pressure relief valve. A 3" tri-clamp gasket is NOT included.

Read more less

3/8" mpt stainless steel spigot with black handle.  

Read more less

3/8" mpt stainless steel spigot for olive oil drum.  

Read more less

Leg extensions are a great option to get th FLEX off the ground. This reduces bending over to take gravity readings, add hops, transfer, etc. The shorty leg extensions are 9” long and the long leg extensions are 18". Both screw directly into the bottom of the FLEX legs. Both sets of leg extensions can be used with the stock leg caps, leveling feet and casters.  *It is recommend to use the extended bracing shelf when using the leg extensions for added stability* Shortly leg extension specifications:  304SS 9" long Top threads for attaching to conical legs Bottom threads for attaching leveling feet and casters Long leg extension specifications:  304SS 18" long Top threads for attaching to conical legs Bottom threads for attaching leveling feet and casters

Read more less

CF30 SPIKE CONICAL UNITANK Spike Brewing has completely re-designed their stainless conical line from the ground up. It took a year in the making and are confident that these are the best conical fermenters on the market! Along with the new TC100 Temp Control System, you'll have everything you need to Elevate Your Brew Day! CF30 Features: 304 stainless steel; 1.5mm (16ga) All sanitary welded ports (no-weldless fittings) All hardware shown here is included! Designed for 1/2 bbl to 1 bbl batches 40 gallon total capacity 15 psi working pressure (always use a 15 psi pressure relief valve) Use for pressure transfers Use as a brite tank Etched volume markings 24" wide by 46¨ tall Fully polished finish Lid Features: 4" TC modular top port Allows for hop additions, temp control coil, top sight glass, etc Three 1.5" TC ports which allow for:  Blow Off Port – Dedicated port for an airlock or blow off tube Hop Port – Dedicated port for adding hops PRV Port – Dedicated port for your pressure relief valve (PRV) Stainless band clamp for attaching the lid Completely removable lid for easy cleaning Body Features: Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps) 1.5" TC racking port with butterfly valve 1.5" TC sample valve (for taking gravity readings) 1.5" TC thermowell with 3" dial thermometer Bracing shelf is included with the CF30  Limited availability in store.  Drop ships from vendor.

Read more less