Draft Supplies - Main

If you use different kegs and couplers on a normal basis, save time by add quick disconnects to your draft systems gas line tubing. Place a quick disconnect fitting in the gas line and no tools are needed to disconnect from the gas source. Simply pull back the sleeve on the female side and the connection separates and the gas is shut off. Note: To make a complete set please order the Disconnect Air Coupler. Specifications: Connection: Male Side Length: 2" Barb: 3/8" O.D. (to fit 5/16" I.D. Gas Hose) Material: Brass, anodized

Read more less

3/8" Hole, 7/16" Barb Shank TailpieceShank Tailpiece for 3/8" ID HoseNickel Plated

Read more less

These disconnects feature 1/4" barbed fittings that will fit into 3/16", 1/4", or 5/16" ID tubing. The temperature range is -40F to 180F and they can handle a vacuum to 120 PSI. The internal valve spring is made of 316 stainless steel and the o-ring is food grade.  

Read more less

Plastic snap clamp for 3/16" I.D. vinyl draft hose.

Read more less

90 degree barbed swivel elbow stem and nut. Specifications: Barb with fit 3/8" ID tubing. Nut is a 1/4" flare fitting. 304 Stainless Steel.

Read more less

If you use different kegs and couplers on a normal basis, save time by add quick disconnects to your draft systems gas line tubing. Place a quick disconnect fitting in the gas line and no tools are needed to disconnect from the gas source. Simply pull back the sleeve on the female side and the connection separates and the gas is shut off.   Note: To make a complete set please order the Disconnect Tailpiece or Disconnect Nipple with Hose Barb. Specifications: Connection: Female Side Length: 3-1/4" Barb: 3/8" O.D. (to fit 5/16" I.D. Gas Hose) Material: Brass Shut-off: Built in

Read more less

Beer line 3/8" x 3/8" stainless steel barbed splicer. Splices 5/16" I.D. Vinyl to 5/16" I.D. Vinyl 5/16" I.D. Vinyl to 3/8" I.D. Poly 3/8" I.D. Poly to 3/8" I.D. Poly Specifications Type:  Straight Connectors Material:  304 Stainless Steel O.D.:  3/8" I.D.:  1/4"

Read more less

This 2-piece solid brass draft faucet cleaning attachment connects to the faucet side of a shank assembly.  Attach some 3/8" ID tubing to the barb and your ready to flush out your draft lines.

Read more less

With this beer faucet cleaning attachment, you can make sure that your beer lines undergo thorough cleaning and washing. You only need to connect this beer faucet cleaning attachment to a pressurized tank of beer-line cleaner to get the best results. Remove the faucet from the shank at the end of the line to be cleaned, and install this beer faucet cleaning attachment in its place. Then, pump the beer-line cleaner through your beer lines until they are thoroughly cleaned and free from dirt, grime, beer stone, and other contaminants. FEATURES Easy-to-attach beer faucet cleaning attachment Beer faucet cleaner attachment made of heavy-duty metal Meets U.S. industry standards Thread: 1-18"-18 Barb: 3/8" Includes washer

Read more less

Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines.  20.5mm for 3/4" OD Tubing.  (17-20mm OD) Stepless Clamp Tool sold separately.

Read more less

Our quick disconnect locks into place with an audible "click," creating a secure, leak—free seal every time. They also allow quick and easy one—handed disconnections by simply pressing the thumb latch. Micro Matic quick disconnect couplings provide a fast, easy and safe way to incorporate a gas shut—off in your draft beer system. FEATURES One handed operation—no tools needed to connect or disconnect Audible "click" asures your connection is secure High flow valve design for maximum flow in a compact coupling Withstand up to 120 PSI Temperature range  -40°F to 180°F (-40°C to 82°C)

Read more less

Nylon flare washers for metal-to-metal 1/4" flare fitting connections. 10 Pack

Read more less

Make a really small and useful keg system out of PET plastic bottles. Great for taking beer to a party or making your own micro/portable/mini keg system. PCO 1881 threading on all ends. Tee fitting only. Does not include Carbonation Caps or PET growler.

Read more less

1/4" Hole, 5/16" Barb Shank Tailpiece Shank Tailpiece for 1/4" ID HoseNickel Plated

Read more less

This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi, and since it cannot be opened or taken apart, it is recommended for gas applications only. The internal components are made from stainless steel. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

This Duotight fitting with 1/4" male thread is a great option for connecting gas line to regulators and manifolds that have 1/4" FPT. Comes with seated O-ring. Compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

This Duotight joiner fitting is compatible with EVABarrier 8 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

5/16" X 5/16" hose splicer (for 5/16" ID hose), 303 stainless steel.

Read more less

1/2" Hole, 9/16" Barb Shank TailpieceShank Tailpiece for 1/2" ID HoseNickel Plated

Read more less

This stainless steel dual line flush adapter will work with D and S style couplers.  This saves time by making it possible to flush two beer line systems at the same time.   The integrated ball lifter in the center of both flushing cups lifts the check ball in the probes to allow easy flushing. Assembly made from Stainless Steel.

Read more less

Stepless Oetiker Clamp, Size 18.5 for 5/8" OD tubing

Read more less

Beer line 3/8" x 1/2" stainless steel barbed splicer. Splices 5/16" I.D. Vinyl to 1/2" I.D. Vinyl 1/2" I.D. Vinyl to 3/8" I.D. Poly 3/8" I.D. Poly to 1/2" I.D. Poly Specifications Type:  Straight Connectors Material:  304 Stainless Steel

Read more less

This Duotight ball valve can be used as an inline shut off valve on beverage lines. Compatible with EVABarrier 9.5 mm OD tubing.Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

This Duotight elbow fitting is compatible with EVABarrier 8 mm OD Tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

Stainless steel barbed tee commonly used to splice/split Co2 draft hose. Specifications 304 Stainless Steel 5/16" ID Barbs T Fitting Splices Together 5/16" I.D. Vinyl to 5/16" I.D. Vinyl 5/16" I.D. Vinyl to 3/8" I.D. Poly 3/8" I.D. Poly to 3/8" I.D. Poly

Read more less

This male to male coupler is commonly used in draft line cleaning. It allows the connection of draft lines for cleaning loops. Male beer thread to male beer thread.

Read more less

These stainless steel butterfly hose clamps are the ideal choice for connecting silicone tubing to quick disconnects, pumps, and more. The butterfly thumb screw allows for toolless tightening and untightening, so you can build out or break down your system without rummaging through the toolbox for the right screwdriver. Fits 1/2 in. OD to 1 in. OD tubing. Actual size of the clamp is 14-25 mm (0.55-0.98 in.). This 10-pack comes in a convenient zip lock bag.

Read more less

This Kegland beer line tidy is a handle little part that will help you organize your beer and gas line inside your fridge, keezer, kegerator or cellar. Simply remove the paper backing and use the strong 3M adhesive to attach this beer/gas line organizer to whatever device you like. This keeps your beer and gas plumbing neat and tidy so your draft system looks as good as it works. Primarily designed for 8 mm (5/16") OD tubing, but works with 9.5 mm (3/8") OD and 6.35 mm (1/4") OD tubing as well. Note: for best results, apply the adhesive at room temperature and let stand for 72 hours before applying load.

Read more less

Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines.  0.95mm for 1/4" OD Tubing.  (6-8mm OD) This clamp will fit our 8mm OD EVABarrier double wall draft tubing. Stepless Clamp Tool sold separately.

Read more less

Stainless Steel, Stepless Oetiker Clamp This style of clamp tightens in an exact circle, making them ideal for use with draft lines.  10.5mm for 5/16" to 3/8" OD Tubing.  (7-10mm OD) This clamp will fit our EVABarrier double wall draft tubing. Stepless Clamp Tool sold separately.

Read more less

This Duotight tee fitting is compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

Splice together 3/16" ID and 5/16" ID tubing with this 303 stainless steel hose splicer.

Read more less

This Duotight Bulkhead is the same one used for installing the Temp Twister cooling coil into the lid of the FermZilla. Allows you to add a bulkhead to just about anything that can then be connected to with EVABarrier 9.5 mm OD Tubing or 3/8" OD stainless or copper tubing.  Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)

Read more less

Splice together 3/16" ID and 3/8" ID tubing with this 303 stainless steel hose splicer.

Read more less

Does not ship.  For in-store or pickup orders only.   The KOMOS™ Commerical Kegerator with stainless Intertap faucets offers the best value in the USA for an all stainless steel commercial rated kegerator. With an all stainless interior and exterior, this unit is built to operate at a level other kegerators simply can't reach. Heavy duty casters come standard for maximum mobility, and front facing ventilation makes it ideal for installing under the kitchen counter. Quick and easy assembly thanks to push-to-connect Duotight fittings and EVABarrier draft tubing. Features include stainless steel Intertap, forward sealing faucets, stainless steel tower with cooling fan, wide-range digital controller, stainless door and exterior, stainless floor and interior, robust KOMOS™ regulator, heavy-duty casters as standard, and a list of options.    This unit features an extended range digital controller that can adjust internal temperatures from 28 - 76°F. The higher end of this range is really convenient for homebrewers who often want to ferment at temperatures around 70°F. The digital controller is mounted on the interior, allowing the exterior to look as clean as possible.   All kegerators come with Intertap faucets mounted on a stainless tower. These faucets are the newest, most advanced, forward sealing, beer faucets on the market today and will work perfectly for years. This model inlcludes the all stainless steel version of the Intertap faucet.    KOMOS™ kegerators come standard with Duotight fittings and EVABarrier draft tubing. Duotight push-in fittings offer quick connection, a reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing. Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). EVABarrier double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. It's also PVC-free and BPA-free.   The KOMOS™ Commercial kegerator boasts a list of other features, such as the included KOMOS™ CO2 regulator, tower fan, heavy duty rolling casters, stainless steel countertop drip tray, stainless steel exterior and interior, lock & key, front facing ventilation, and robust compressor that is suitable for ambient environments up to 104°F.   Feature Summary: Stainless Steel Air Cooled Tower Stainless Steel Intertap Forward-Sealing Faucet(s) Duotight Fittings make connecting draft lines a breeze Digital Thermostat with wide 28 - 76° F temp range. Optimal ambient temperature is  32°F – 104°F Robust KOMOS Dual Gauge Regulator included CO2 Tank strap mounts above a triangular stage inside the kegerator (tank not included) Efficient and powerful compressor uses R600 refrigerant Stainless Steel interior and exterior Stainless Steel Countertop Style Drip Tray Stainless Steel Floor for additional keg support Heavy duty rolling casters come standard Front-facing vent perfect for installing unit into cabinets or under bar Lock & key to keep your precious beverages protected Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x line of varying length depending on number of taps (2, 2.5, or 3m) Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines (2, 3 tap only) You will need to purchase additional keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend the Duotight 8mm x 1/4" flare fitting For commercial sanke keg couplers we recommend Duotight 8mm x Female Beer Thread fitting Detailed instructions on assembly and use Specifications: 24" Wide 25" Deep 35" Tall (fridge only) 39.25" with Caster Wheels 47.75" with Tower 52" with Casters and Tower 115V - 60 hz 1.6 Amp draw Works well in ambient temperatures up to 100°F Internal Dimensions: 21" Wide 18.25" Max Depth 28.5" Tall 27" clearance under controller What Fits: 2.6 Gal. BrewKeg - 2 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 3 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 2 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 Refrigerator only option does not include tower, faucets, duotight connectors, and tubing.

Read more less

Replacement gasket for 3 and 5 spout bottle fillers. This gasket attaches to the end of the bottle filler tube, with the wide, flat "brim" of the gasket pressed against the inside of the reservoir. Usage tips:The gasket should be fitted onto the the filler tube until it stops, it should not be pushed on all the way. The stainless steel tube should not be protruding all the way through the gasket. For the best seal, the gasket should be positioned so that the flat "bottom" surface if the gasket is parallel to the flat side of the reservoir. The round ridge around the outside of the gasket should be depressed evenly when seated on the side wall.  Dimensions: The inside of the gasket measures .39", or about 3/8" diameter. The width of the body of the gasket is 0.7" (not including the flange)

Read more less