Regulators & Repair

Regulator inlet flare fitting for primary regulators. 1/4" NPT (left hand) x 1/4" flare Does not include check valve

Read more less

Made from 304 stainless steel, set of 2, for the front and back of your gauges. These cages will protect your regulator gauges from damage. Works with Micro Matic and NADS regulator.

Read more less

This manifold allows you to serve four beers at the same pressure. It’s made from brass and features a pressure relief valve, shut offs with check valves, 3/8” inlet and outlet barbs, and a 304 stainless mounting bracket.

Read more less

Regulator inlet flare fitting for primary regulators. 1/4" NPT (Right Hand Thread) x 1/4" flare Does not include check valve

Read more less

This adapter can be installed on the Core 360 Mini Regulator from Kegland in order to use 74 gram CO2 cartridges. Use a crescent wrench to remove the stock adapter piece for 12 gram cartridges and simply screw in this adapter with 5/8-18 UNF female threading. Switching to 74 g cartridges will allow you dispense 1-4 Cornelius kegs, depending on how it is used and the CO2 consumption required. TR21-4 Male Thread x 5/8-18 UNF Female Thread Adapter only. Regulator and CO2 cartrdige sold separately. KegLand Part Number: KL20411  

Read more less

Stainless steel gauge cage for KOMOS CO2 dual gauge regulators.  Includes mounting screws. Pictured regulator not included.  

Read more less

Hex nipple, 1/4" NPT, 9/16" hex, 1.87" overall length, for primary regulators, left hand threads

Read more less

"Y" fitting body, 1/4"NPT (male) x (2) 1/4"NPT (female), no outlet fittings

Read more less

Protect your Taprite brand regulator with this metal guard.  Tanks occasionally tip over and damage the gauges when they do. This guard takes the blow instead of your gauge.   Attaches to the regulator by screwing into the back.  Does not work with the Micromatic or Komos branded regulators.

Read more less

Pressure gauge, 0-160 psi, 1/4" npt bottom inlet, right hand threads.  

Read more less

Left hand thread (LHT), brass hex nipple generally used for regulator and manifolds.  Specifications: 1/4" NPT x 1/4" NPT (LHT) 9/16" hex 1-3/8" length

Read more less

The Duotight In-Line Regulator works with both gas and liquid. Easily adjust the flow can be adjusted with the yellow adjustment knob. 6.35 mm Duotight fittings at both inlet and outlet make this unit perfect for use with 6.35 mm OD tubing.  Features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. The size of the Duotight connection and the extended 0-150 PSI pressure range makes this model perfect for stepping down the pressure of your mains water line for use with water filtration or RO systems. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 6.35mm (1/4") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-150 psi Made with quality EPDM seals Wall mountable WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge.

Read more less

Draft Beer CO2 regulator to nitrogen tank adapter Quickly converts a Nitrogen into a CO2. If you own a nitrogen regulator and want to use it on a Co2 tank, then the following adapter can save you money! Simply screw on one side of the adapter to your nitrogen regulator and the other side to your Co2 tank valve. Connects a nitrogen regulator to CGA-320 Co2 tank valve

Read more less

This Premium Plus low pressure primary regulator has a 15 PSI gauge head for accurate adjustment in low pressure dispensing applications. Many wine and cask conditioned systems use 5 PSI or lower for dispensing and maintaining a low pressure blanket on the wine or beer. For added safety, this model has an integrated pressure relief valve that stops the gas flow if the pressure gets too high (55-65 PSI). Premium Plus regulators come standard with a tamper-evident adjustment screw and bonnet, preventing unauthorized adjustment to gas pressure which can cause service issues. FEATURES Adjust pressure from 0 to 15 PSI Built for durability: forged brass body, accurate machining, chrome-plated finish Premium quality metal gauges for durability Tamper-evident adjustment screw and bonnet Nickel-plated valve seats for high corrosion resistance Enlarged CO2 port for high volume Safety relief valve releases at 55-65 PSI Factory leak tested at 145 PSI Made in the USA Excellent for dispensing keg wine and cask beer Specifications: Performance: 1 Pressure / 1 Product Height: 7-1/4" Width: 3-3/4" Depth: 5-1/2" Pass-thru barbs, Includes plug  

Read more less

Adjustable chain to fit cylinder diameter. Holder for Cylinder 1 Can hold the cylinder maximum of 166mm Diameter

Read more less

Threaded Nipple with 3/8" O.D. Hose Barb (Right Hand Thread) Right Hand 1/4" NPT to 3/8" barb

Read more less

Threaded Nipple with 1/4" O.D. Hose Barb (Right Hand Thread) Right Hand 1/4" NPT to 1/4" barb

Read more less

Economical fiber washer for CO2 regulator. Fits between the gas cylinder and regulator connection. 10 Pack

Read more less

Replacement keg beer regulator CO2 Inlet Nipple. Specifications: 1/4" NPT Left Hand Thread (LHT) 2-1/4" Length

Read more less

Allows you to easily use a 74g CO2 cartridge with your 16g hand held keg charger. This adapter has a 5/8" male end and a 3/8" female end.

Read more less

The inlet Co2 filter helps to filter out contaminates from Co2 Gas.  Inserts inside the Micro Matic Premium Regulator inlet stem.

Read more less

Beer Nut Inlet Seal for Micro Matic Premium 640 Series Regulators.

Read more less

Rebuild a Micro Matic Economy Regulator with this 3-piece repair kit. Includes: Pressure Plate 2" Diaphram Seat Capsule Assembly

Read more less

Pressure gauge, 0-120 psi, 1/4" npt bottom inlet, right hand threads.  

Read more less

Replacement low pressure gauge for Co2 regulator.  Looking to dial in your dispensing pressure? The maximum reading on this gauge is 15psi allowing you to adjust to that perfect pressure. 0-15 PSI 1/4" NPT bottom inlet Right hand threads

Read more less

Use to connect secondary regulators 1/4" NPT x 1/4" NPT Right hand thread

Read more less

This replacement knob is for Kegland branded CO2 tanks.  It is compatible with 2.5 - 20 pound tank sizes.      

Read more less

This brass hex nipple is 2.5" in length and has 1/4" NPT, right hand threads (rht). It is commonly used for secondary regulators.

Read more less

3-way horizontal gas manifold without safety pressure release. 3/8" barbed inlet (3) 5/16" barbed shut-offs Shut-offs do not include check valves Aluminum body

Read more less

A 0-15 lb low pressure, 1/4" thread back mounted pressure gauge commonly used on spunding valves.Please Note: Color/ style of gauge may vary

Read more less

Material: Stainless Steel 304 Mounting Bracket: Integrated Inlet Connection: 1/2" O.D. Barb Outlet Connection: 7/8" - 14 (5/8" BSP)

Read more less

1/4" NPT plug, left hand threads, Allen socket head, for primary regulators

Read more less

This kit contains everything you need to service your 3700 series TapRite regulator after years of use. It includes a 1.6" diaphragm, capsule, and tank nipple o-ring which are the most common wear and leak points.

Read more less

If you need to fit your inline regulators or blowties in a much tighter spot without having the yellow handle accidentally twist and turn, then this product is right for you.Simply use a Phillips Head Screw driver to adjust the pressure of your inline regulator or BlowTie. This is an unofficial 3D print and not a KegLand product

Read more less

Replace CO2 Inlet Stem for Micro Matic Premium Series CO2 Gas Regulators. Specifications: Left Hand 1/4" NPT Chrome Finish 2-1/4" Length Does not include Inlet Seal, Inlet Co2 Filter, or Nylon Inlet Seal.

Read more less

Replacement inlet nipple for nitrogen regulator with 1/4 left hand thread.  

Read more less