Faucets & Shanks

CO2 Bulk Head Length : 4” Long x 7/16″ 1/4" MFL Thread • This bulkhead allows you to keep your CO2 outside of the refrigerator or freezer and run your gas line through the wall without drill a large whole. The rubber gaskets included seal of the whole or the gas and gives.

Read more less

Simply unscrew the normal spout on a NukaTap or Intertap faucet and screw this stout spout in its place to pour your nitro brews. This spout has a creamer/aerator disc inside that strips out the nitrogen gas for a creamier beer. Matches perfectly with the NukaTap Stealth Bomber faucet! Stainless steel construction with matte black finish. Note: Pictured faucet sold separately.

Read more less

Flanged lock nut for beer shanks, 1-3/16" hex, 29/32-14 thread.

Read more less

Draft tower shank assembly for 2.5" diameter tower. Specifications: Shank Length: 2.25" Shank Material: Chrome plated brass Bore Size: 3/16" with 1/4" counter bore Barb Size: 1/4" Flange Material: Chrome plated plastic 

Read more less

Manufactured by Krome Dispense, the shank is made from stainless steel 304, is 3-1/8” long and has 3/16” Bore ID.  Includes black plastic flange, coupling sleeve, snap ring, and coupling nut. Stainless steel will not impart any off-tastes and will not tarnish like brass or pit like chrome.  Stainless is a great choice for all beer, wine, cocktails, or cider. Specifications: Material: 304 Stainless Steel Length: 3-1/8" Bore ID: 3/16" Thread Size: 5/8"-14 BSP Made in India.  

Read more less

This Duotight 8 mm (5/16") adapter is designed to suit the Nukatap Mini and will allow you to couple the faucet to a wide range of other 8 mm Duotight fittings. This includes attaching it to the Duotight Flow Control Ball Lock Disconnect. This particular type of flow control ball lock disconnect includes a "tang" at the top of the push in fitting that couples with this adapter. The combination of the two fittings prevents the faucet from spinning around while in use.

Read more less

Also called a faucet positioner because it angles big tap handles from touching the wall or refrigerator. Installs on top of beer faucet lever and then the tap handle thread into this bonnet angler. Made from chrome plated brass.

Read more less

Draft faucet shaft assembly with seat. 304 stainless steel.  

Read more less

This 304 stainless steel shank made by Micro Matic is a perfect option for serving up fresh beverages from a draft faucet.  The shank provides a bulkhead through your refrigerator door.  The end that is inside the fridge you attached your beverage line with a tailpiece and hex nut.  On the other end of the shank you attach your draft faucet. This NSF-certified shank is made of 304-grade stainless steel and is excellent for any beverage. The shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. Includes the flanges, coupling nut, and lock nut necessary to attach it to the draft tower and faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. FEATURES The best in purity - only 304 stainless steel touches the product Complete assembly Connects beverage lines to the faucet Excellent for any beverage Highly durable SpinStop™ technology – keeps the faucets upright Fits on North American faucets NSF certified SPECIFICATIONS Dimensions: 3-1/8"L Bore Dimensions: 1/4" I.D. Shank thread: 7/8"-14 (5/8" BSP U.S. Beer Industry Standard)

Read more less

This matte black, stainless steel tower shank is the ideal match for the NukaTap Stealth Bomber faucet.  The 1/4" tailpiece is Duotight compatible and pairs perfectly with the Duotight 6.5 mm x 8 mm reducer, allowing you to quickly and easily connect 8mm OD EVABarrier draft line. Duotight fitting pictured is sold separately. Please note these shanks are not compatible with Perlick brand faucets. WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov    

Read more less

Chrome plated beer shank assembly Specifications: Chrome plated brass shank 2-1/8" length 1/4" bore plastic flange Does not include hose tailpiece Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

4" 304 stainless steel cooler wall coupling with 3/8" bore. Includes a two rubber washers and two lock nuts. Specifications: Material: Stainless Steel 304Finish: SS PolishedLength: 4"Bore ID:  3/8"Thread Size:  5/8"-14 BSP

Read more less

3" Special Shank Assembly for Jockey Box. Material: Stainless Steel Bore: 1/4" x 5/16"

Read more less

Faucet shank barrel sleeve

Read more less

This 3-1/8" shank is made of 316 surgical grade stainless steel making it more resistant to the acidic nature of wine. Includes: 3-1/8" 316 stainless steel shank with 1/4 bore Forged brass lock nut Black plastic flange Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Made in India

Read more less

Stainless Steel Beer Faucet Shank Assembly - 2-1/8"L with 1/4" Bore. Made of 304 stainless steel, this NSF certified shank can be used for any beverage. A high-end shank is crucial to serving up perfectly fresh beverages from a draft faucet. The stainless steel beer faucet shank assembly is inserted through your refrigerator or house wall. On one end, inside the fridge, you attach the beverage lines. On the other end, the shank is connected to your draft faucet.  This Micro Matic, NSF-certified beer shank is made of 304-grade stainless steel and is excellent for any beverage. The shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. Includes the flange, coupling nut, and lock nut necessary to attach it to the draft tower and faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. If you're using equipment from outside North America, you'll need to source a specialty shank.  STAINLESS STEEL SHANK FEATURES  The best in purity - only 304 stainless steel touches the product  Complete assembly  Connects beverage lines to the faucet  Excellent for any beverage  Highly durable  Micro Matic's SpinStop™ technology – keeps the faucets upright  Fits on North American faucets  NSF certified  Specifications Use:  Dispensing Wine / Cider / Beer Length:  2-1/8" Bore I.D.:  1/4" Material:  304 Stainless Steel Approval:  NSF Certified

Read more less

Beer Shank Extension Faucet Assembly - 3-1/8"L with 1/4" Bore. This Micro Matic, NSF-certified Beer Shank Extension Faucet Assembly is made of chrome-plated brass and is excellent for both home and commercial bars. The beer shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. The assembly includes the flange, coupling nut, and lock nut necessary to attach it to the draft beer tower and beer faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. If you're using equipment from outside North America, you'll need to source a specialty shank. A high-end beer shank is crucial to serving up perfectly fresh beer from a draft beer faucet. The beer shank is inserted through your refrigerator or house wall. On one end, inside the fridge, you attach the beer lines. On the other end, the shank is connected to your draft faucet. Features Complete assembly Chrome-plated brass Connects beer lines to the faucet Micro Matic's SpinStop™ technology – keeps the faucets upright Highly durable Fits on North American faucets NSF certified Specifications Length: 3-1/8" Bore I.D.: 1/4" Thread: 7/8"-14 (5/8" BSP) (U.S. Beer Industry Standard) Material: Chrome Plated Brass Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

Brass faucet lever replacement for most standard U.S. draft faucets.

Read more less

Faucet bonnet, chrome plated brass.

Read more less

Use with a hanger bolt to attach to a wooden tap handle. This ferrule has 5/16” top threads and 3/8” bottom threads.

Read more less

Replacement chrome plated faucet lever collar.

Read more less

304 stainless steel faucet insert with 12 inches of 5/16" ID draft tubing.  This insert fits into older styles of Perlick and Perl faucets.

Read more less

6-1/8" stainless steel shank assembly for dispensing beer, wine, cider, or kombucha.  Wall flange is a black plastic material. Specifications: Length: 6-1/8" Bore ID: 1/4" Thread: 7/8"-14 (5/8" BSP) Material: 304 stainless steel shank 

Read more less

Replacement star lock washer for dual shank.

Read more less

Made from chrome plated brass, this lock is easy to remove and install on your faucet. It features a hardened steel locking hasp and lock that are keyed alike, a brass tumbler, and two keys.

Read more less

Add height to your faucet handle with a 1" extension. Material: Brass Finish: Chrome Plated Brass Length: 1" Extension Thread Size: 3/8" x 16 UNC

Read more less

4.5" jockey box wall coupling with 3/8" bore. Material: Brass Finish: Chrome plated brass Length: 4.5" Bore ID: 3/8" Thread Size: 5/8"- 14BSP Important information: Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

3” shank for jockey box. Material: Brass Finish: Chrome Plated Brass Length: 3" Bore ID: 5/16" Thread Size: 5/8" - 14 BSP Important information: Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Read more less

The 690SS Forward Sealing Flow Control Faucet with Push-Back Creamer features a flow compensator which also enables the operator the precise amount of foam every time. The flow compensator provides more control because by adjusting the flow control handle, you can adjust the restriction for hard to pour brands. You can also adjust the flow control handle to slow the flow for pouring sampler glasses, flights or growlers as well as to reduce the amount of foam when pouring into a frosted glass.Perlick Creamer FaucetsPull forward to pour, push back to create a rich and creamy headFlow Control304 Grade S/S Body and 304 Grade S/S Lever

Read more less

Manufactured by Krome Dispense, the shank is made from stainless steel 304, is 5-1/8” long and has 3/16” Bore ID.  Includes black plastic flange, coupling sleeve, snap ring, and coupling nut. Stainless steel will not impart any off-tastes and will not tarnish like brass or pit like chrome.  Stainless is a great choice for all beer, wine, cocktails, or cider. Specifications: Shank Material: 304 Stainless Steel Length: 5-1/8" Bore ID: 3/16" Thread Size: 5/8"-14 BSP Made in India.  

Read more less

This 5-1/8" shank is made of 316 surgical grade stainless steel making it more resistant to the acidic nature of wine. Includes: 5-1/8" 316 stainless steel shank with 1/4 bore Forged brass lock nut Black plastic flange Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Made in India

Read more less

This 4-1/8" shank is made of 316 surgical grade stainless steel making it more resistant to the acidic nature of wine. Includes: 4-1/8" 316 stainless steel shank with 1/4 bore Forged brass lock nut Black plastic flange Important information – Prop. 65 for CA residents.Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. Made in India

Read more less

Shank Beer Faucet Assembly - 2-1/8"L with 1/4" Bore. Made of chrome-plated brass, this NSF certified beer shank is excellent for both home and commercial bars. A high-end shank is crucial to serving up perfectly fresh beer from a draft beer faucet. The shank beer faucet is inserted through your refrigerator or house wall. On one end, inside the fridge, you attach the beer lines. On the other end, the shank is connected to your draft faucet.   This Micro Matic, NSF-certified shank is made of chrome-plated brass and is excellent for both home and commercial bars. The beer shank assembly uses Micro Matic's SpinStop™ technology, a simple solution that stops the spin and keeps the faucets upright. Includes the flange, coupling nut, and lock nut necessary to attach it to the draft tower and faucet. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. If you're using equipment from outside North America, you'll need to source a specialty shank.  Features Complete assembly  Chrome-plated brass  Connects beer lines to the faucet  SpinStop™ technology – keeps the faucets upright  Highly durable  Fits on North American faucets  NSF certified  Specifications Length:  2-1/8" Bore I.D.:  1/4" Material: Chrome Plated Brass Approval:  NSF Certified

Read more less