Draft Bottle Filling
Nukatap Counter Pressure Bottle Filler
The Nukatap Counter Pressure Bottle Filler is a great way to fill bottles directly from your taps without compromising your kegged beer’s flavor, aroma or carbonation levels. It's completely made from stainless steel with no aluminum or brass components. This enables you to use a wide range of chemicals for cleaning this device without the risk of damaging the device or accessories. It's very compact and will fit any tap with 10.0 mm inner diameter spout/nozzle or with a 3/8" thread. To use this device simply connect CO2 gas line to the filling unit and away you go. The integrated counter pressure relief valve gives you good control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature. This cannot be used with taps with a vent hole but will fit pretty much all forward-sealing taps on the market such as the Nukatap SS, Nukatap FC, Intertap, Perlick 600-series and other brands. This unit is designed to fill multiple sizes of beer bottles up to 500 mL thanks to the telescopic filling stem. We recommend starting with it fully extended, then insert the stem till your at the bottom of the bottle, purge the bottle with CO2, then press the stem all the way in to form a seal on your bottle. This unit comes complete with a wide range of accessories including carbonation caps so you can quick disconnect your beer line, Duotights so you can fit a beer line to the unit and other usefull fittings you might need. Includes: All stainless steel counter pressure filler Push-in spout compatible with forward-sealing faucets (2) 8 mm Duotight adapters for filler and NukaTap spout (2) Ball Lock Post Adapters (Red / Yellow) 19.5" length of 8 mm OD x 5 mm ID EVABarrier tubing
$87.99
Gasket for Bottle Filler Spout
Replacement gasket for 3 and 5 spout bottle fillers. This gasket attaches to the end of the bottle filler tube, with the wide, flat "brim" of the gasket pressed against the inside of the reservoir. Usage tips:The gasket should be fitted onto the the filler tube until it stops, it should not be pushed on all the way. The stainless steel tube should not be protruding all the way through the gasket. For the best seal, the gasket should be positioned so that the flat "bottom" surface if the gasket is parallel to the flat side of the reservoir. The round ridge around the outside of the gasket should be depressed evenly when seated on the side wall. Dimensions: The inside of the gasket measures .39", or about 3/8" diameter. The width of the body of the gasket is 0.7" (not including the flange)
$2.20
Adjustable Stainless Gas Pressure Relief - Non-threaded
A useful component for a spunding valve, this stainless steel pressure relief valve is adjustable from 0 to 30 psi. Note: This pressure relief is Non-threaded. It is intended for welding in place only.
$14.99
Counter Pressure Bottle Filler
Flush and fill your bottles with ease. The valve has three positions: off, beer, and gas. Insert filler into the bottle in the off position, switch to gas to flush the bottle with CO2, and then switch to beer to fill your bottle. You can control the speed of your flow with the adjustable pressure relief. This filler is designed for use with 12 oz. bottles but can be used with larger formats by attaching a small piece of 1/4" tubing to the filler.
$77.00
Tapcooler Ball Lock Adapter
Easily connect a gas ball lock fitting into your Tapcooler Counter Pressure Bottle Filler with this handy ball lock CO2 adapter! Made of aluminium.
$14.99
Tapcooler Pressure Relief Valve Drain Tube
This drain tube attaches to the pressure relief valve on the Tapcooler Counter Pressure Bottle Filler to drain away excess beer! Having issues with foam and beer leaking from the Tapcooler Counter Pressure Bottle Filler? This pressure relief drain tube hooks directly up to the pressure relief valve of the Tapcooler to drain away excess beer and foam! Measuring 1 meter long (roughly 40 inches), the end of the tube can be placed in a growler or other receptacle so you can keep filling bottles without spillage!
$8.99
Deluxe Counter Pressure Bottle Filler
Flush and fill your bottles with ease. This filler has all the great features of the Counter Pressure Bottle Filler with the added benefit of a pressure gauge and flared connections. The gauge helps monitor pressure inside of your bottles and the flared connections make cleaning your lines a breeze. The valve has three positions: off, beer, and gas. Insert filler into the bottle in the off position, switch to gas to flush the bottle with CO2, and then switch to beer to fill your bottle. You can control the speed of your flow with the adjustable pressure relief. This filler is designed for use with 12 oz. bottles but can be used with larger formats by attaching a small piece of 1/4" tubing to the filler.
$109.00
Counter Pressure Accessory Package
Use this kit with your counter pressure bottle filler. This kit includes a gas line tee, gas and beverage quick disconnects, 6' of gas line, flare fittings, and 5' of beer line.
$40.00
Adjustable Pressure Relief Valve with Ball Lock Coupler
This adjustable pressure relief valve can be used when transferring or filtering beer from one keg to another. The end of the pressure valve turns to let you adjust the amount of pressure released.
$27.50
Gas Pressure Relief, Stainless
Gas Manifold - Pressure Relief Valve 1/4" Male ThreadingSet to blow off at 55psi.
$11.00
Tapcooler Beer Valve Keg Connector
Want to bottle directly from your ball or pin lock keg using the Tap Cooler Counter Pressure Bottle Filler? This beer valve connector tube assembly will allow you to do just that! Setup is a snap. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball (or pin) lock connector into the included swivel nut set on the tubing, and hook to your keg, and get to bottling! The valve acts as the beer faucet normally would, starting and stopping flow directly from the keg. The attached tubing is 2 meters (about 78 inches) long, giving you plenty of versatility in your bottling range. Another great accessory from Tapcooler! Tapcooler and ball lock disconnect not included.
$39.99
Tapcooler Filler Extension Tube
The Tapcooler extension tube is perfectly suited to provide the counter pressure filler a bit of extra space for the bottles where there is not enough room to fit them directly under the tap. The one end of the connection hose is designed to screw into the top of the filler unit and the other end of the tube is designed to screw into the filler unit's removable tap nozzle insert. Includes two small o-rings to seal the extension line on either end (there is already an o-ring seal inside the filler unit when the tap nozzle insert is removed). Tubing (based on length chosen) Stainless steel faucet fitting Stainless steel Tapcooler fitting Required o-rings for sealing purposes Comes pre-assembled!
$17.99
BeerGun® Tip: version 2
Replacement BeerGun® tip for version 2 units.
$2.50
