Brewing Equipment

Ball Valve hardware pack for the BrewBuilt Brewing Kettle with 2 x tri-clamp ports. Includes ball valve and hardware for connecting tubing at the kettle's bottom port. End cap included to seal the top port if a thermometer or other accessory is not in place. Includes: (1) Stainless 1.5" Tri-Clamp 3-Piece Ball Valve (1) Stainless 1.5" Tri-Clamp x 1/2" Barb Adapter (3) Stainless 1.5" Tri-Clamp (3) EPDM 1.5" Tri-Clamp Gasket (1) Stainess 1.5" End Cap

Read more less

Thick neoprene jacket for the 65 L Brewzilla or DigiBoil. This jacket will fit Gen 3.1.1 and older BrewZilla models. Note: This jacket is not compatible with Gen 4 BrewZillas. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 65 L Brewzilla and DigiBoil Made from thick neoprene which is also easy to wash after use Put it on to speed up heating; take it off to speed up chilling Kegland Part Number: KL08921

Read more less

The Brewer's BeAst® 16 gallon brew kettle with ports is a perfect choice for intermedieate and advanced brewers. Perfect for full boil brewing, small scale mashing or brew in a bag! The Brewer's BeAst® kettle is a perfect upgrade from the basic brew pot or brew kettle. Fetaures two threaded ports that allow for easy attachement of ball valves, a temperature guage or other accessories. This kettle is ready to be customized as you see fit. Great for use on gas stoves, propane burners or even inductions style stoves. Specifications: Graduated marking inside and out Lid included Two welded 1/2" npt threaded ports Tri-clad 4mm induction ready bottom 1.0mm walls Silicone dipped handles 15.7" diameter x 18.9" high

Read more less

Get brewing with the 16 Gallon Brewer's Best Basic Brewing Pot! From the Brewer's Best® line, this versatile pot can be used as a primary kettle or for heating sparge water. With its 10-gallon batch capacity and compatibility with gas stoves and propane burners, it's perfect for both full and partial mash recipes. This kettle features two threaded ports that allow for easy attachment of ball valves, a temperature gauge or other accessories. Customize as you see fit! Specifications: Graduated marking inside and out Lid included Two welded 1/2" npt threaded ports Constructed of high quality 201 stainless steel 1.0mm wall and bottom Handles on both sides for easy lifting 15.7" diameter x 18.9" high

Read more less

Get brewing with the 8 Gallon Brewer's Best Basic Brewing Pot! From the Brewer's Best® line, this versatile pot can be used as a primary kettle or for heating sparge water. With its 5-gallon batch capacity and compatibility with gas stoves and propane burners, it's perfect for both full and partial mash recipes. This kettle features two threaded ports that allow for easy attachment of ball valves, a temperature gauge or other accessories. Customize as you see fit! Specifications: Graduated marking inside and out Lid included Two welded 1/2" npt threaded ports Constructed of high quality 201 stainless steel 1.0mm wall and bottom Handles on both sides for easy lifting 12.5" diameter x 17" high

Read more less

Get brewing with the 16 Gallon Brewer's Best Basic Brewing Pot! From the Brewer's Best® line, this versatile pot can be used as a primary kettle or for heating sparge water. With its 10-gallon batch capacity and compatibility with gas stoves and propane burners, it's perfect for brewing. Specifications: Graduated marking inside and out Lid included No ports Constructed of high quality 201 stainless steel 0.8mm wall and bottom (20 guage) Handles on both sides for easy lifting 15.7" diameter x 18.9" high 8 pounds

Read more less

For use with the 35L BrewZilla Boiler Extension Kit. It does not come with an extra Wire Malt Pipe Support Ring. If you're using the extended malt pipe with the 35L DigiBoil, you will need to purchase the ring separately. If you're using the malt pipe with the 35L BrewZilla you can either move your ring up to the boiler extension, or buy an additional ring so you can remove the malt pipe in two steps. You will also need the Recirculation Arm Extension to continue using the BrewZilla's recirculation arm. Compatible with Gen 3 and Gen 4 BrewZillas.

Read more less

Drop Ships from vendor. Please allow additional time for processing. A Feature-Packed Kettle at an Amazing Price! Our new T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. With the ball valve hardware pack, you'll have everything you need to use the kettle on Day 1. The advantage of this model is that you're getting a fully functional kettle and the lowest cost. The disadvantage is that ball valves tend to trap a small amount of wort inside them, so you may need to break it down for cleaning in between brew days.   If you want the ultimate sanitary option, the BrewBuilt Brew Kettle with Butterfly Valve hardware pack is available. Or you can purchase the kettle without fittings and customize it with the fiitings that best suit your needs.   Ball Valve Pack Includes: 1/2" Ball Valve (T.C. x T.C.) 3 x Tri-Clamps 3 x Tri-Clamp Gaskets 1.5" T.C. x 1/2" Barb T.C. End Cap (for plugging thermometer port) These days homebrewers have a lot of strong choices when it comes to their kettle purchase. BrewBuilt has adopted a modern feature set designed to make the brew day easier. Silicone handle and lid grips help prevent burns. Etched internal volume markings make filling the kettle for mash or boil simple. Welded valve and thermometer ports are leak-free and never require maintenance--no more discovering worn gaskets on brew day. Sealed handle rivets are strong and allow the entire kettle to be filled if necessary. And perhaps best of all, it features the signature BrewBuilt notched lid with a silicone plug that allows the lid to be in place while using immersion chillers or an Ultimate Sparge Arm. These kettles are truly designed for brewing. Key Features: Two welded T.C. couplers for a lifetime of leak free use AISI304 Stainless Steel construction for longevity and excellent corrosion resistance Stainless handles and rivets for secure lifting Silicone coated kettle and lid handles for heat protection Lid is designed to conveniently hang from a handle 4 mm Tri-Clad Bottom with Aluminum Core heats quickly and disperses heat evenly to prevent scorching Induction burner compatible 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 1.2:1 height to diameter ratio provides optimal evaporation rate during boiling Industry-First notched lid with silicone plug accommodates an immersion chiller or sparge arm Internally etched volume markers from top to bottom for easy filling BrewBuilt Homebrewing Products: Designed for Brewing, Built to Last. Size Kettle ID (in.) Height (in.) 10 13.78 16.54 15 15.75 18.90 20 17.72 21.26 30 19.69 23.62 50 23.62 28.30   Drop Ships from vendor. Please allow additional time for processing.

Read more less

Flare threads make it quick and easy to disconnect and sanitize your air stone. Made from 316 stainless steel, 1/2" diameter, stone is 1" in length.

Read more less

The BrewBuilt CoolStix is a revolutionary cooling solution for carboys. It is easy to clean, easy to setup, and cools quickly and efficiently. The CoolStix uses a submersible pump to circulate cooling solution and a digital temperature controller to regulate flow. When the controller's temperature probe detects that the fermentation temp is getting too hot, it will power on the submersible pump to run ice water or glycol through the CoolStix. Once the temperature stabilizes, the controller will shut off the pump and stop circulation. You Will Also Need: Submersible Pump Temperature Controller Thermowell 3/8" ID Tubing 3-Hole Hood or Stopper Ice Bath or Glycol Chiller CoolStix Specs: Diameter - 1/2" Overall Length - 25½" Bottom of CoolStix to Lower Assembly - 22" Width from CoolStix to Barb - 5½" Made from 304 Stainless Steel

Read more less

The chiller's coils have been positioned higher so it sits near the top of your wort, making it more efficient resulting in faster chill times. It has 50' of 1/2" copper tubing with connections for garden hoses and measures approximately 10" in diameter, 13" to the top coil, and about 24" tall. The chiller will work with converted kegs and most 10 gallon kettles.   

Read more less

Use in conjunction with the Grainfather Connect Control Box thermometer, for accurate control of your wort transfer temperature through the Grainfather Counter Flow Chiller. Avoid long lag time and off flavors by using the Grainfather Wortometer. Adjust your wort and water flow rates from the Grainfather Counter Flow Chiller by dialing in the exact wort temperature your specific yeast requires.  Requires an 8 mm inner diameter silicon hose. 

Read more less

A copper counterflow chiller with connection fittings and attached mounting bracket.  The wort in and out lines are 1/2" fpt connections with the water connections are male and female 3/4" garden hose connections.  The inner tube is made from 12' of 5/8" convoluted (twisted) copper which continually turbulates the wort as it flows through. The outer tube is made from 7/8" copper. This counterflow chiller allows you to pump wort through without having to restrict your pump to slow down flow.10 1/4" height by 11" overall diameter (coils themselves are about 6" in diameter)

Read more less

This jacket is designed to insulate your 27L FermZilla during the colder months to keep your fermentation at the optimum temperature. It can also be used with a heating wrap to warm up the fermenter if the heat from fermentation isn't enough.  This jacket also completely blocks out any light/UV to prevent light struck beer.

Read more less

This 40 plate chiller is equipped with 3/4" MPT water in/out and 1/2" MPT wort in/out. It measures approximately 8.25 inches long, 4 inches high and 3 inches wide.

Read more less

Suitable for Gen 4 BrewZillas and Gen 1 65L DigiBoils. The feet of those brewing systems slot into the cutouts on the dolly plate to make moving your brewery around a breeze. Lock your brewery in place with two locking wheels. These dollies are highly recommended if you are using a Lift-N-Lock Pulley type system for your malt pipe to move the brewery into the exact spot that you need and move away. Please take note that the bolts are pushed through from the bottom, not top down. This Dolly Bundle is highly recommended for 65L and 100L BrewZillas. Includes: Reinforced Plastic Dolly Plate 100 mm Castor Wheels (2 locking, 2 non-locking) Mounting Hardware Plate Dimensions: 21.6" Ø x 0.7" Thick (550 mm x 20 mm) BrewZilla sold separately KegLand Part Number: KB11089 NOTE: Due to the redesigned base of the Gen 2 DigiBoil, these units will not rest in the cutout holes of the dolly plate. They can still be placed on top of the dolly, but use caution when moving the kettle, especially when full.

Read more less

DigiMash Upgrade Kit for 35L DigiBoil. Includes everything you need to use the DigiBoil as an electric, digitally controlled mash tun. Note: The Gen 2 DigiMash Upgrade Kit is backwards compatible with Gen 1 DigiBoils. Includes: False bottom Malt pipe Wire support  Malt pipe handle Malt pipe bottom screen Kegland Part Number: KL12980

Read more less

Convert the BrewBuilt T.C. brewing kettle into a mash tun using one of these false bottom kits. The heavy duty false bottom rests low in the kettle, utilizing a tri-clamp style maximizer that reduces dead space and pulls from the very bottom of your kettle, leaving no wort behind. A Silicone gasket rims the False Bottom, ensuring a tight seal to the wall with no chance of grain bypass. A handle is welded to the top of the false bottom for easy removal. Specifications: 1.5" tri-clamp and gasket included Welded T.C. maximizer False bottom gasket for tight seal Welded legs and handle Made from 304 stainless steel NOTE: These false bottom kits will fit all BrewBuilt T.C. kettles, including the electric kettle with SlingBlade heating element. It is not recommended converting the electric kettle into a mash tun as the element will scorch the grain. If you wish to use the false bottom in your boil kettle, it should be noted that the screen is designed to filter grain, so fine particle vegetal matter will pass through.

Read more less

Drop Ships from vendor. Please allow additional time for processing. BrewBuilt's T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. The appetite for tri-clamp fittings continues to grow in the homebrewing market as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. With the ball valve hardware pack, you'll have everything you need to use the kettle on Day 1. The advantage of this model is that you're getting a fully functional kettle and the lowest cost. The disadvantage is that ball valves tend to trap a small amount of wort inside them, so you may need to break it down for cleaning in between brew days.   If you want the ultimate sanitary option, the BrewBuilt Brew Kettle with Butterfly Valve hardware pack is available. Or you can purchase the kettle without fittings and customize it with the fiitings that best suit your needs.   Ball Valve Pack Includes: 1/2" Ball Valve 2 x Tri-Clamps 2 x Tri-Clamp Gaskets T.C. to 1/2" MPT adapter 1/2" MPT x 5/8" Barb T.C. End Cap (for plugging thermometer port) Teflon Tape These days homebrewers have a lot of strong choices when it comes to their kettle purchase. BrewBuilt has adopted a modern feature set designed to make the brew day easier. Silicone handle and lid grips help prevent burns. Etched internal volume markings make filling the kettle for mash or boil simple. Welded valve and thermometer ports are leak-free and never require maintenance--no more discovering worn gaskets on brew day. Sealed handle rivets are strong and allow the entire kettle to be filled if necessary. And perhaps best of all, it features the signature BrewBuilt notched lid with a silicone plug that allows the lid to be in place while using immersion chillers or an Ultimate Sparge Arm. These kettles are truly designed for brewing. Key Features: Two welded T.C. couplers for a lifetime of leak free use AISI304 Stainless Steel construction for longevity and excellent corrosion resistance Stainless handles and rivets for secure lifting Silicone coated kettle and lid handles for heat protection Lid is designed to conveniently hang from a handle 4 mm Tri-Clad Bottom with Aluminum Core heats quickly and disperses heat evenly to prevent scorching Induction burner compatible 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 1.2:1 height to diameter ratio provides optimal evaporation rate during boiling Industry-First notched lid with silicone plug accommodates an immersion chiller or sparge arm Internally etched volume markers from top to bottom for easy filling BrewBuilt Homebrewing Products: Designed for Brewing, Built to Last. Size Kettle ID (in.) Height (in.) 10 13.78 16.54 15 15.75 18.90 20 17.72 21.26 30 19.69 23.62 50 23.62 28.30   Drop Ships from vendor. Please allow additional time for processing.

Read more less

A replacement malt pipe for the Gen 4 35L BrewZilla. Note: This malt pipe is Not Compatible with Gen 3 or older BrewZillas or DigiBoils. Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos. Dimensions: 11.8" (300 mm) Outer Diameter 10.6" (270 mm) Inner Diameter 18.1" (460 mm) Tall

Read more less

Add some insulation to your BrewZilla to get better boils! This neoprene jacket will help keep the heat in for quicker and more vigorous boils. Slap it on to speed up heating; take it off to speed up chilling. Also includes a neoprene sleeve for the recirculation arm to reduce heat loss during the mash. This jacket will fit Gen 4 BrewZilla 65l models. It is not compatible with older generations of BrewZillas and DigiBoils due to where the cutouts on the jacket are located. Features: 10% faster heat up time 50% less heat loss from boiler Fits the 65L BrewZilla Gen 4 Made from 8 mm thick neoprene which is easy to wash after use

Read more less

An economy stainless steel 18.5 gallon kettle with included ball valve and barb. Specifications: 18.5 Gallon Stainless Steel Brewmaster Brewing Kettle Two Welded 1/2" Full Couplers allow for internal and external attachments Stainless 1/2" Full Port Ball Valve & nipple included for bottom Coupler Stainless 1/2" Plug included for top coupler Stamped Volume Markers Silicone Handle Grips Internal Threading allows for conversion to Mash Tun or addition of whole hop filters Internal Dimensions: 18" Tall x 17.75" Ø 1.2 mm thick walls Made from 201 Stainless Steel

Read more less

These Spike Brewing false bottoms are for use with their standard Spike kettle line that uses NPT fittings. For the standard Spike+ kettle line that uses TC fittings please see HERE. Design Features: All stainless design; no Silicone gasket to make a seal Low profile design; extremely low dead space (<.25gal)  Best filtering on the market due to dual stage filter design; 99.9% grain filtering efficiency Pickup tube and push to connect fitting are included False bottom and pick up tube are Made in the USA! 2 Stage Filtering: Stage 1: Filters through top plate's optimally engineered sized laser cut slits Stage 2: Bottom ring supports the grain weight while also filtering the wort again before it reaches the pickup tube **False bottoms are not designed to filter pellet hops in the boil kettle. Instead you'll want to create a whirlpool to center the hop material and then drain using a side pickup (HERE)**

Read more less

MaltMuncher High Torque Motor Perfect for motorizing your MaltMuncher grain mill. This unit does not include a 110v receptacle box and requires some electrical assembly.  A wiring diagram is not provided from the manufacture. Specifications: 110V 1 Amp High Torque (1:7.5 ratio) Sealed Housing Fits both 10/12 mm crank shafts (works with both 2/3 roller mills) MaltMuncher grain mill is not included.

Read more less

For any container with at least a 9" opening, such as a bucket or 5 gallon insulated cooler. The barb fitting is 3/8". Made from stainless steel.

Read more less

50 GALLON STAINLESS BREW KETTLE - V4 Spike Brewing has once again re-designed their brew kettle.  They make one of the best brewing kettles available on the market.  It is the thickest kettle on the market, with US welded fittings (no more weldless fittings) at a factory direct price. Kettle Features: 15 - 32 gallon batch size 304 (18/8) stainless steel  Sanitary welded coupler design (done at our facility in Milwaukee, WI) 1.5mm thick walls (50% thicker than competition) 6mm tri-clad bottom (induction capable) Internal volume markings Polished finish 23.6¨ wide by 27.1¨ tall Domed bottom design Bottom coupler 1.5" off the bottom (3 gallon mark) Top coupler 6" off the bottom (12 gallon mark) Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

30 GALLON STAINLESS BREW KETTLE - V4 Spike Brewing has once again re-designed their brew kettle.  They make one of the best brewing kettles available on the market.  It is the thickest kettle on the market, with US welded fittings (no more weldless fittings) at a factory direct price. Kettle Features: 10 - 20 gallon batch size 304 (18/8) stainless steel  Sanitary welded coupler design (done at our facility in Milwaukee, WI) 1.5mm thick walls (50% thicker than competition) 6mm tri-clad bottom (induction capable) Internal volume markings Polished finish 19.7¨ wide by 24.1¨ tall Domed bottom design Bottom coupler 1.5" off the bottom (2.25 gallon mark) Top coupler 6" off the bottom (8 gallon mark) Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

20 GALLON SPIKE+ BREW KETTLE Introducing Spike Brewing's new Spike+ line of kettles! Spike+ is just that, an improvement on an already great platform. The Spike+ line draws from the pro side of brewing with the standard use of tri-clamp (TC) fittings. TC fittings do not have any threads and use a gasket and clamp which allows for quick attaching/detaching of fittings. The Spike+ line is for the most serious homebrewers! While designing the setup of the kettle, Spike Brewing offset the ports on these kettles, so you have ample room to use our butterfly valves, or other accessories, with ease. Kettle Features: 6 – 15 gallon batch 304 (18/8) stainless steel  Sanitary welded coupler design (done at Spike Brewing's facility in Milwaukee, WI) 1.2mm thick walls (thickest on the market) 5mm tri-clad bottom (induction capable) Internal volume markings Polished finish 17.7¨ wide by 21.4¨ tall Domed bottom design Bottom coupler 2" off the bottom (2.5 gallon mark) Top coupler 4" off the bottom (4 gallon mark) Staggered design keeps the top port submerged with half batches Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

36" stainless steel wand with a 2 micron diffusion stone.

Read more less

Note: Limited inventory in store - Drop ships from vendor. The Grainfather G30³ is the original all-in-one electric homebrewing system and three-time winner of Craft Beer & Brewing Top Brew Gear of the Year in 2019, 2020, and 2022. Compact and simple to use, with a small footprint for brewing indoors the Grainfather G30³ v3 provides a home brewery system that with superior design, innovative features and the latest technology, allows you to brew professional quality craft beer at home. The Grainfather G30 v3 is your all in one brewing system, to make beer from grain. The sleek look, user friendly, intuitive design, and innovative features, make this your perfect brewing companion for both experienced and beginner all grain brewers. It is made from high quality 304 grade stainless steel with a 8 US Gal capacity, designed to make up to 6 US Gal of beer from one brew. New Features on the G303: 1. ) Auto Reset Switch Lifting and reaching underneath the boiler to reset your electric homebrewing system is now a thing of the past! The new auto reset switch avoids needing a physical, manual switch to reset the system; ensuring homebrewers can quickly and easily resume their brew day if an unexpected reset is required. 2. ) Grain Basket Assembly The newly redesigned Perforated Edge Grain Basket on the G303 features side wall perforations to improve wort flow and to prevent a stuck mash. In addition to the redesigned grain basket, the new Rolled Edge Mash Plate filters the wort efficiently without warping. The new rolled edges mean that there is no need for silicone seals, making the plates much easier to install, remove, and clean. The new grain basket and mash plate design means that there is no need for overflow pipework or a top plate, allowing for a hassle-free brew day. Same Great Features: Benefits of Electric Heating The Grainfather is electrically powered and designed to be used indoors. No need for burners, or hot plates, just plug in and go! It is fitted with a controlled heating element so that the correct power can be used depending on what stage of the brewing process you are at. A gentler heat is used at certain stages for accurate temperature control and and to minimise the risk of scorching and after the mash it can also ramp up the heat quickly for when more vigorous heating is required. Heating from mash to boil takes as little as 20 minutes. Wireless Control for Heat, Power, and Pumping Use the Grainfather G30³ Control Box in conjunction with the Connect App and Grainfather Brewing Community for the ultimate brewing experience. Create your recipes on the Grainfather Brewing Community and then sync these recipes with the Connect app. The control box has Bluetooth connection to your mobile device so it can be controlled remotely. This allows you to multitask or simply relax while brewing and then be alerted when to return to your next step.  Features: PID algorithm works in conjunction with a triac for more stable heating and so you can control power output Programmable step mashing Delayed heating - fill your Grainfather with water the night before and wake up to your water at strike temperature ready for brewing straight away Change between celsius and fahrenheit easily Waterproof graphic display Use in manual mode or with app Grainfather App Ability to import recipes (Beer XML files) - NOTE: iOS9 and higher Set your own boil temperature (for different altitudes) Change between celsius and fahreheit easily Grainfather calculators provided in app Create recipes on the Grainfather Brewing Community and then sync these with the Connect App to brew Powerful Magnetic Drive Pump A 6 Watt, 1,800 RPM magnetic powered pump has been fitted to recirculate the wort through the grain bed for maximum brewing efficiencies. This is also used during the cooling stage to pump hot wort through the wort chiller. The pump also makes the cleaning process quick and easy by pumping the cleaning detergent through all the pipe work. The magnetic drive pump has been selected after rigorous testing of multiple pump styles to ensure it meets the tough demands required of continuous brewing. The pump is concealed by a stainless pump cover, which is easy to pop open, giving you direct access. A pump filter is fitted inside the Grainfather to prevent hops and stray grain from entering the pump or pipework, keeping the wort clear while also preventing any blockages.  Support Grainfather is fully supported around the world by a fantastic support team who love brewing just as much as you do. Our support team is here for any technical enquiries on brewing or how the Grainfather works, as well as general customer service enquiries. All Grainfather G30³ units come with a 3-year warranty.  → Grainfather Warranty Policy PLEASE NOTE: All Grainfather G30s contain a yellow packaging strip in the boiler. This should be discarded before you begin brewing. Specifications 304 Grade stainless steel body 220- 240 volt power 8 US Gal Capacity Expandable grain basket to suit grain bills up to 20 lb A robust magnetic drive pump (6 watt, 1800 RPM) Tempered glass lid for maximum durability, heating efficiencies and visibility during your brew day. Clips to easily convert your Grainfather into a home distillery with the Pot Still Attachments  

Read more less

Ball Valve hardware pack for the BrewBuilt Brewing Kettle with 2 x tri-clamp ports. Includes ball valve and hardware for connecting tubing at the kettle's bottom port. End cap included to seal the top port if a thermometer or other accessory is not in place. Includes: (1) Stainless 3-Piece Ball Valve - 1.5" T.C. x 1/2" FPT (1) Stainless 1/2" MPT x 5/8" Barb Adapter (2) Stainless 1.5" Tri-Clamp (2) EPDM 1.5" Tri-Clamp Gasket (1) Stainless 1.5" End Cap Teflon Tape

Read more less

An all-grain brewing essential, false bottoms lay in the bottom of a mash tun and prevent grain from leaving, allowing the wort to flow freely into the boil kettle. Fits the 16 gallon Brewer's Best® pots and kettles. Specifications 15.5" diameter Stainless Steel Welded legs

Read more less

An all-grain brewing essential, false bottoms lay in the bottom of a mash tun and prevent grain from leaving, allowing the wort to flow freely into the boil kettle. Fits the 8 gallon Brewer's Best® pots and kettles. Specifications 11.5" diameter Stainless Steel Welded legs

Read more less

This Brewbuilt® counterflow heat exchanger is an absolute beast when it comes to chilling wort. Made from passivated 304 stainless steel, The Beast has a 30 ft. wort line with 1.5" T.C. connections and a 29.5 ft. coolant line with 1/2" male BSPT connections. The wort line is 1/2" ID so the chiller can withstand high amounts of hop additions without clogging. A mounting bar is welded to the chiller so you can mount it under your work bench or to the frame of your brewing system if desired. Specifications: Beer Line: 30 ft. long Beer Connection: 1.5" tri-clamp Coolant Line: 29.5 ft. long Coolant Connection: 1/2" BSPT Crossbar with pre-drilled mounting holes (4mm) Made from 304 stainless steel Brewbuilt® is a registered trademark owned by MoreFlavor, Inc.

Read more less

Control and power up to two fermenters at different temperatures and fermentation schedules with the GC2. By accurately controlling the temperature of your fermentation, you can produce consistent beers, every time. FEATURES Control and power up to two fermenters at different temperatures and fermenting schedules Use with the GCA Glycol Chiller Adapter to connect to the Grainfather S SERIES range of fermenters or most other fermenters Sleek and compact design with LED control display Compatible with the Grainfather App when connected to a Grainfather G SERIES fermenter or the GCA for managing your fermentation from anywhere via Wi-Fi Backed by a 3-year warranty Can be shipped without a pallet WHAT'S INCLUDED GC2 Glycol Chiller Glycol funnel Silicone tubing for priming pump *Propylene glycol and insulated connection hoses are sold separately Limited availability in store, may drop ship from vendor. Call for availability. 

Read more less

Did you drop your temperature controller for your TC-100 bundle?  Are you tired of the old Spike logo and colors and want the newest and greatest? Well do we have the controller for you! This thermometer will control to your submersible pump in your cold reservoir and your conical heater. Set your desired fermentation temperature and the controller does the rest! Specifications: Temperature Control Range: -50-210° F Temperature Accuracy: ± 1° F Input Power:  100-265V AC, 50/60Hz Output Power: 100-265V AC, MAX 10A

Read more less