Bottle Fillers & Disconnects
Tapcooler Beer Valve Keg Connector
Want to bottle directly from your ball or pin lock keg using the Tap Cooler Counter Pressure Bottle Filler? This beer valve connector tube assembly will allow you to do just that! Setup is a snap. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball (or pin) lock connector into the included swivel nut set on the tubing, and hook to your keg, and get to bottling! The valve acts as the beer faucet normally would, starting and stopping flow directly from the keg. The attached tubing is 2 meters (about 78 inches) long, giving you plenty of versatility in your bottling range. Another great accessory from Tapcooler! Tapcooler and ball lock disconnect not included.
$39.99
Tapcooler Filler Extension Tube
The Tapcooler extension tube is perfectly suited to provide the counter pressure filler a bit of extra space for the bottles where there is not enough room to fit them directly under the tap. The one end of the connection hose is designed to screw into the top of the filler unit and the other end of the tube is designed to screw into the filler unit's removable tap nozzle insert. Includes two small o-rings to seal the extension line on either end (there is already an o-ring seal inside the filler unit when the tap nozzle insert is removed). Tubing (based on length chosen) Stainless steel faucet fitting Stainless steel Tapcooler fitting Required o-rings for sealing purposes Comes pre-assembled!
$17.99
Grommet for 5/16'' ID SS Tubing
Rubber grommet for chrome plated brass ferrule with 5/16" ID bore.
$1.95
Elbow Tailpiece, 3/8'' Barb, Stainless Steel
Stainless steel elbow tailpiece with 3/8" Barb
$6.95
Chrome Plated Brass Ferrule for 5/16'' ID SS Tubing
Brass ferrule for jockey box cooling coil. Chrome plated brass with a 5/16" ID bore.
$3.50
Chrome Plated Brass Ferrule for 1/4'' ID SS Tubing
Brass ferrule for jockey box cooling coil. Chrome plated brass with a 1/4" ID bore.
$3.50
BeerGun® Tip: version 2
Replacement BeerGun® tip for version 2 units.
$2.50
Duotight 9.5 mm (3/8 in.) x 1/2 in. BSP Ball Valve
This Duotight ball valve with 1/2" male thread is perfect for attaching to the water input on the Copper Counterflow Chiller, allowing you to adjust the water flow while chilling your wort. Compatible with EVABarrier 9.5 mm OD tubing. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)
$5.00
