Products

50 GALLON STAINLESS BREW KETTLE - V4 Spike Brewing has once again re-designed their brew kettle.  They make one of the best brewing kettles available on the market.  It is the thickest kettle on the market, with US welded fittings (no more weldless fittings) at a factory direct price. Kettle Features: 15 - 32 gallon batch size 304 (18/8) stainless steel  Sanitary welded coupler design (done at our facility in Milwaukee, WI) 1.5mm thick walls (50% thicker than competition) 6mm tri-clad bottom (induction capable) Internal volume markings Polished finish 23.6¨ wide by 27.1¨ tall Domed bottom design Bottom coupler 1.5" off the bottom (3 gallon mark) Top coupler 6" off the bottom (12 gallon mark) Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

50 GALLON SPIKE+ BREW KETTLE Introducing Spike Brewing's new Spike+ line of kettles! Spike+ is just that, an improvement on an already great platform. The Spike+ line draws from the pro side of brewing with the standard use of tri-clamp (TC) fittings. TC fittings do not have any threads and use a gasket and clamp which allows for quick attaching/detaching of fittings. The Spike+ line is for the most serious homebrewers! While designing the setup of the kettle, Spike Brewing offset the ports on these kettles, so you have ample room to use our butterfly valves, or other accessories, with ease. Kettle Features: 15 – 32 gallon batch 304 (18/8) stainless steel  Sanitary welded coupler design (done at Spike Brewing's facility in Milwaukee, WI) 1.5mm thick walls (thickest on the market) 6mm tri-clad bottom (induction capable) Internal volume markings Polished finish 23.6¨ wide by 27.1¨ tall Domed bottom design Bottom coupler 2" off the bottom (4 gallon mark) Top coupler 4" off the bottom (8 gallon mark) Staggered design keeps the top port submerged with half batches Lid is included Pictured Ball Valve and Thermometer Sold Separately. Limited availability in store.  Drop ships from vendor.

Read more less

This strain of wild yeast was isolated from brewery cultures in the Brussels region of Belgium. It produces the classic sweaty horse blanket character of indigenous beers such as gueuzes, lambics, and sour browns.May form a pellicle in bottles or casks. The strain is generally used in conjunction with S. cerevisiae, as well as other wild yeast and lactic bacteria. At least 3-6 months aging is generally required for flavor to fully develop. Flocculation: MediumAttenuation: Very HighTemperature Range: 60-75° F (15-24° C)Alcohol Tolerance: Approximately 12% ABV Styles: Flanders Red Ale, Fruit Lambic, Gueuze, Straight (Unblended) Lambic We ship all liquid yeast with an ice pack and insulated bubble envelope. Beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.

Read more less

L. buchneri. This culture produces moderate levels of acidity and is commonly found in many types of beers including gueuze, lambics, sour brown ales and Berliner Weisse. It is always used in conjunction with S.cerevisiae and often with various wild yeast. Use in wort or beer below 10 IBU is recommended due to the culture's sensitivity to hop compounds. Origin: Flocculation: Attenuation:Temperature Range: 60-95° F (15-35° C)Alcohol Tolerance: N/A Styles: Berliner Weisse, Flanders Brown Ale/Oud Bruin, Flanders Red Ale, Fruit Lambic, Gueuze, Straight (Unblended) Lambic We ship all liquid yeast with an ice pack and insulated bubble envelope. Beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.

Read more less

This is a wild yeast strain isolated from Belgian lambic beers. It produces a pie cherry-like flavor and sourness along with distinct Brett character. A pellicle may form in bottles or casks. To produce the classic Belgian character, this strain works best in conjunction with other yeast and lactic bacteria. It generally requires 3-6 months of aging to fully develop flavor characteristics. Flocculation: MediumAttenuation: Very HighTemperature Range: 60-75° F (15-24° C)Alcohol Tolerance: Approximately 12% ABV Styles: Berliner Weisse, Flanders Red Ale, Fruit Lambic, Gueuze, Straight (Unblended) Lambic We ship all liquid yeast with an ice pack and insulated bubble envelope. Beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.

Read more less

Lactic acid bacteria used in the production of Belgian style beers where additional acidity is desirable. Often found in gueuze and other Belgian style beer. Acid production will increase with storage time. It may also cause ropiness and produce low levels of diacetyl with extended storage time. Origin:Flocculation Attenuation:Temperature Range: 60-95° F (15-35° C)Alcohol Tolerance: N/A Styles: Fruit Lambic, Gueuze, Straight (Unblended) Lambic We ship all liquid yeast with an ice pack and insulated bubble envelope. Beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.

Read more less

These 5 gram sulfur discs are ideally sized for 60 gallon barrels.  Break the disc into smaller parts for use in smaller barrels.  Best when used with a sulfur burner. 10 pack

Read more less

Does not ship.  In store pick up only. Filled 5 pound aluminum CO2 cylinder. Will dispense approximately 9 five gallon kegs before needing to be refilled.     Dimensions: 18" Tall x 5.25" wide.      These are used cylinders that have been filled from a local vendor.      

Read more less

6.5 gallon Italian glass carboy. Airtight, easily sanitized and does not hold an odor, perfect for your beer or wine making needs. Made in Italy. Closure options: #7 rubber stopper #7 silicone bung #7 silicone breathable bung Buon vino small stopper #16 tapered cork

Read more less

Airtight, easily sanitized and does not hold an odor, perfect for your beer or wine making needs. Made in Italy. Closure options: #7 rubber stopper #7 silicone bung #7 silicone breathable bung Buon vino small stopper #16 tapered cork

Read more less

Six gallon PET plastic carboy Made of heavy PET, BPA free plastic. Ideal for secondary fermentations of both wine and beer and for bulk aging of wine. Completely taste and odor free and stain resistant. No side-wall ribs to collect yeast or sediment, making it easy to clean. Impermeable to oxygen. Closure options:  #10 rubber stopper #10 breathable bung Buon vino intermediate stopper #26 tapered cork Silicone bung for large barrel

Read more less

The 6 Gallon Wide Mouth FerMonster Carboy.With a wider 4" mouth, there is easier access for cleaning. It is made of heavy P.E.T. plastic. Comes with an O-ring and air-tight one piece lid with a hole that will take a #10 stopper (not included). There are no ribs, only smooth sides, so no yeast or sediment will adhere to walls during fermentation. Completely taste and odor-free. It is also stain resistant. Impermeable to oxygen. 100% made in Canada. Comes with 5 gallon, 6 gallon and 7 gallon easy-to-read markings on the side. Also they are big enough so you can use them as your primary fermenter. The FerMonster is hard to carry, we strongly suggest that you purchase a carboy carrier (make sure it fits your specific size of carboy).

Read more less

This 6" long stainless steel shank assembly has a 1/4" bore. The following is included in the assembly: 6" 304 stainless steel shank with 1/4" bore Locking ring Sleeve Coupling nut Lock nut Choice of either a black plastic flange or stainless steel flange

Read more less

Helps filter debris when transferring wort from your kettle to your fermenter.

Read more less

6-1/8" stainless steel shank assembly for dispensing beer, wine, cider, or kombucha.  Wall flange is a black plastic material. Specifications: Length: 6-1/8" Bore ID: 1/4" Thread: 7/8"-14 (5/8" BSP) Material: 304 stainless steel shank 

Read more less

This modular gas manifold will allow you split one CO2 line to six of them.  Each line can be turned off individually without affecting the flow to other kegs.  Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs.  The barbs are all 5/16" which is standard for gas line in the beer industry. If later, you decide to add an additional keg this manifold can be expanded using the Add On Assembly.

Read more less

Pail fermenter lid that fits the Brewmaster branded 6.5 gallon pail fermenter and the 6.5 gallon pail fermenter with spigot hole. This lid does not have a sealing o-ring gasket to seal the bucket air tight. Available with an airlock grommet insert or as an solid lid without an airlock hole.

Read more less

Duotight 6.5 mm (1/4 in.) x 9.5 mm (3/8 in.) Reducer Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!  Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) 

Read more less

Universal poppet valve fits most kegs.

Read more less

The 7 Gallon Wide Mouth FerMonster Carboy.With a wider 4" mouth, there is easier access for cleaning. It is made of heavy PET plastic. Comes with an o-ring and air-tight one piece lid with a hole that will take a #10 stopper (not included). There are no ribs, only smooth sides, so no yeast or sediment will adhere to walls during fermentation. Completely taste and odor-free. It is also stain resistant. Impermeable to oxygen. 100% made in Canada. Comes with 5 gallon, 6 gallon and 7 gallon easy-to-read markings on the side. Also they are big enough so you can use them as your primary fermenter. The FerMonster is hard to carry, we strongly suggest that you purchase a carboy carrier (make sure it fits your specific size of carboy).

Read more less

Used to calibrate a pH meter that requires pH 7.01 solution. 20 ml single use sachets.

Read more less

Gasketed lid for 7.8 gallon BSG Handcraft branded fermenter pail.  Available with or without the grommet for an airlock.

Read more less

A 7.9 gal (30 L) food-grade plastic bucket. Ideal for all fermentations, but especially ideal for wine kits, beers that tend to have a high krausen (hefe) and any fermentation that is slightly too large for your 6 gallon pail. The smooth walls are easier to clean compared with other blow molded fermenters that have quite porous walls. Why Polypropylene?   These buckets are made from polypropylene as it is less porous and significantly smoother than other HDPE fermenters. HDPE is porous and can harbor microbial activity making it more difficult to clean and sanitize. Being less porous, polypropylene also does not absorb aroma like HDPE so there is less flavor carry over from batch to batch.   Note: These buckets come molded with a threaded hole for a spigot to screw into. We recommend the Italian bottling spigot.   Please note: the spigot hole comes pre-molded into the bucket and needs to be drilled out before installing the spigot. It is recommend using a 5/8" drill bit, taking care not to strip the female threads that accept the spigot. The spigot includes a back nut that won't be needed—simply remove the back nut and thread in the spigot with the gasket in between the neck of the spigot and the bucket. The lid forms a very tight seal and requires a decent amount of downward force to lock in place. Lid sold separately.

Read more less

Clear, flexible, and food-safe, this polyvinyl chloride (PVC) tubing is perfect for handling beverages and liquids. The 7/16″ tubing is recommended for 1/2″ auto-siphons.  Material: PVC (polyvinyl chloride)  ID: .438 (7/16)  OD: .688 (11/16)  Wall: .125 (1/8) Max. Pressure: 30 psi (at 70 °F. Higher temperatures lower maximum working pressures.) Max. Temperature: 150°F  Prop 65 Warning: This product contains phthalates (DEHP, DBP, BBP), a chemical known to the State of California to cause cancer, birth defects and other reproductive harm.

Read more less

This co2 cartridge is used with larger, more robust mini regulators. One canister will push between 1-4 five gallon Cornelius style homebrew kegs, depending on how it is used and the CO2 consumption required. Please Note: This unit is not compatible with the Torpedo Mini CO2 Regulator due to the gap between the threading and the tip of the cartridge. For those units select this link for the recommended 74 g cartridge. 5/8-18 UNF threading 74 g cartridge Shipping Restricted: This product is only eligible for ground shipment within the contiguous 48 states.   C02 Warning: Warning, this product is a gas that is under pressure. Please make sure that when in use the bottle remains in an upright position. Please use extreme caution when using.  

Read more less

This adapter can be installed on the Core 360 Mini Regulator from Kegland in order to use 74 gram CO2 cartridges. Use a crescent wrench to remove the stock adapter piece for 12 gram cartridges and simply screw in this adapter with 5/8-18 UNF female threading. Switching to 74 g cartridges will allow you dispense 1-4 Cornelius kegs, depending on how it is used and the CO2 consumption required. TR21-4 Male Thread x 5/8-18 UNF Female Thread Adapter only. Regulator and CO2 cartrdige sold separately. KegLand Part Number: KL20411  

Read more less

The most popular wine bottle in the world. As the name suggests, the Bordeaux bottle (also known as a Claret bottle) originates from the Bordeaux region of France. Easily identified by its wide shoulders and straight body, this bottle style comes in a variety of colors and is suitable for a myriad of wine styles. Brown and dark green are commonly used for reds to protect them from light during long storage periods, while light green and flint are most often used only for white wines that will be consumed much sooner after bottling. Volume: 750 mL Style: Bordeaux / Claret Use: Riesling, Chardonnay, Cabernet Sauvignon Color: Champagne Green Finish: Cork Bottom: Punted Case QTY: 12

Read more less

Thicker and heavier than your standard wine bottle, these champagne style bottles are a heavy 699 gm and designed to hold high pressure beverages like sparkling wine. They can sealed with either a 26.5mm crown cap or with a stopper and wire. Volume: 750 mL Style: Champagne / Sparkling Use: Sparkling Wine Color: Emerald Green Finish: 26.5mm crown Bottom: Flat Case QTY: 12

Read more less